diff options
-rw-r--r-- | MAINTAINERS | 2 | ||||
-rw-r--r-- | arch/arm/mach-pxa/Kconfig | 9 | ||||
-rw-r--r-- | arch/arm/mach-pxa/Makefile | 4 | ||||
-rw-r--r-- | arch/arm/mach-pxa/reset.c | 96 | ||||
-rw-r--r-- | arch/arm/mach-pxa/spitz.c | 8 | ||||
-rw-r--r-- | arch/arm/mach-pxa/tosa-bt.c | 150 | ||||
-rw-r--r-- | arch/arm/mach-pxa/tosa.c | 390 | ||||
-rw-r--r-- | drivers/input/keyboard/tosakbd.c | 2 | ||||
-rw-r--r-- | drivers/mfd/Kconfig | 11 | ||||
-rw-r--r-- | drivers/mfd/Makefile | 4 | ||||
-rw-r--r-- | drivers/mfd/mfd-core.c | 114 | ||||
-rw-r--r-- | drivers/mfd/tc6393xb.c | 600 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/hardware.h | 5 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/irqs.h | 1 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/system.h | 17 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/tosa.h | 50 | ||||
-rw-r--r-- | include/asm-arm/arch-pxa/tosa_bt.h | 22 | ||||
-rw-r--r-- | include/linux/mfd/core.h | 55 | ||||
-rw-r--r-- | include/linux/mfd/tc6393xb.h | 49 | ||||
-rw-r--r-- | include/linux/mfd/tmio.h | 17 | ||||
-rw-r--r-- | sound/soc/pxa/Kconfig | 1 | ||||
-rw-r--r-- | sound/soc/pxa/tosa.c | 29 |
22 files changed, 1539 insertions, 97 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 3b228e2..20aef95 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -584,6 +584,8 @@ L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained ARM/TOSA MACHINE SUPPORT +P: Dmitry Baryshkov +M: dbaryshkov@gmail.com P: Dirk Opfer M: dirk@opfer-online.de S: Maintained diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 1a7ceb8..7f9664d 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -310,4 +310,13 @@ config PXA_PWM default BACKLIGHT_PWM help Enable support for PXA2xx/PXA3xx PWM controllers + +config TOSA_BT + tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" + depends on MACH_TOSA + select RFKILL + help + This is a simple driver that is able to control + the state of built in bluetooth chip on tosa. + endif diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index 0865236..b282412 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -4,7 +4,7 @@ # Common support (must be linked before board specific support) obj-y += clock.o devices.o generic.o irq.o dma.o \ - time.o gpio.o + time.o gpio.o reset.o obj-$(CONFIG_PM) += pm.o sleep.o standby.o obj-$(CONFIG_CPU_FREQ) += cpu-pxa.o @@ -61,3 +61,5 @@ obj-$(CONFIG_LEDS) += $(led-y) ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o endif + +obj-$(CONFIG_TOSA_BT) += tosa-bt.o diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c new file mode 100644 index 0000000..9d39dea --- /dev/null +++ b/arch/arm/mach-pxa/reset.c @@ -0,0 +1,96 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <asm/io.h> +#include <asm/proc-fns.h> + +#include <asm/arch/pxa-regs.h> +#include <asm/arch/pxa2xx-regs.h> + +static void do_hw_reset(void); + +static int reset_gpio = -1; + +int init_gpio_reset(int gpio) +{ + int rc; + + rc = gpio_request(gpio, "reset generator"); + if (rc) { + printk(KERN_ERR "Can't request reset_gpio\n"); + goto out; + } + + rc = gpio_direction_input(gpio); + if (rc) { + printk(KERN_ERR "Can't configure reset_gpio for input\n"); + gpio_free(gpio); + goto out; + } + +out: + if (!rc) + reset_gpio = gpio; + + return rc; +} + +/* + * Trigger GPIO reset. + * This covers various types of logic connecting gpio pin + * to RESET pins (nRESET or GPIO_RESET): + */ +static void do_gpio_reset(void) +{ + BUG_ON(reset_gpio == -1); + + /* drive it low */ + gpio_direction_output(reset_gpio, 0); + mdelay(2); + /* rising edge or drive high */ + gpio_set_value(reset_gpio, 1); + mdelay(2); + /* falling edge */ + gpio_set_value(reset_gpio, 0); + + /* give it some time */ + mdelay(10); + + WARN_ON(1); + /* fallback */ + do_hw_reset(); +} + +static void do_hw_reset(void) +{ + /* Initialize the watchdog and let it fire */ + OWER = OWER_WME; + OSSR = OSSR_M3; + OSMR3 = OSCR + 368640; /* ... in 100 ms */ +} + +void arch_reset(char mode) +{ + if (cpu_is_pxa2xx()) + RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; + + switch (mode) { + case 's': + /* Jump into ROM at address 0 */ + cpu_reset(0); + break; + case 'h': + do_hw_reset(); + break; + case 'g': + do_gpio_reset(); + break; + } +} + diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index e7d0fcd..d58c3e9 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -38,6 +38,7 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> #include <asm/arch/pxa2xx-gpio.h> +#include <asm/arch/pxa27x-udc.h> #include <asm/arch/irda.h> #include <asm/arch/mmc.h> #include <asm/arch/ohci.h> @@ -529,11 +530,7 @@ static struct platform_device *devices[] __initdata = { static void spitz_poweroff(void) { - pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT); - GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void spitz_restart(char mode) @@ -547,6 +544,7 @@ static void spitz_restart(char mode) static void __init common_init(void) { + init_gpio_reset(SPITZ_GPIO_ON_RESET); pm_power_off = spitz_poweroff; arm_pm_restart = spitz_restart; diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c new file mode 100644 index 0000000..7d85054 --- /dev/null +++ b/arch/arm/mach-pxa/tosa-bt.c @@ -0,0 +1,150 @@ +/* + * Bluetooth built-in chip control + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/rfkill.h> + +#include <asm/arch/tosa_bt.h> + +static void tosa_bt_on(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 0); + gpio_set_value(data->gpio_pwr, 1); + gpio_set_value(data->gpio_reset, 1); + mdelay(20); + gpio_set_value(data->gpio_reset, 0); +} + +static void tosa_bt_off(struct tosa_bt_data *data) +{ + gpio_set_value(data->gpio_reset, 1); + mdelay(10); + gpio_set_value(data->gpio_pwr, 0); + gpio_set_value(data->gpio_reset, 0); +} + +static int tosa_bt_toggle_radio(void *data, enum rfkill_state state) +{ + pr_info("BT_RADIO going: %s\n", + state == RFKILL_STATE_ON ? "on" : "off"); + + if (state == RFKILL_STATE_ON) { + pr_info("TOSA_BT: going ON\n"); + tosa_bt_on(data); + } else { + pr_info("TOSA_BT: going OFF\n"); + tosa_bt_off(data); + } + return 0; +} + +static int tosa_bt_probe(struct platform_device *dev) +{ + int rc; + struct rfkill *rfk; + + struct tosa_bt_data *data = dev->dev.platform_data; + + rc = gpio_request(data->gpio_reset, "Bluetooth reset"); + if (rc) + goto err_reset; + rc = gpio_direction_output(data->gpio_reset, 0); + if (rc) + goto err_reset_dir; + rc = gpio_request(data->gpio_pwr, "Bluetooth power"); + if (rc) + goto err_pwr; + rc = gpio_direction_output(data->gpio_pwr, 0); + if (rc) + goto err_pwr_dir; + + rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH); + if (!rfk) { + rc = -ENOMEM; + goto err_rfk_alloc; + } + + rfk->name = "tosa-bt"; + rfk->toggle_radio = tosa_bt_toggle_radio; + rfk->data = data; +#ifdef CONFIG_RFKILL_LEDS + rfk->led_trigger.name = "tosa-bt"; +#endif + + rc = rfkill_register(rfk); + if (rc) + goto err_rfkill; + + platform_set_drvdata(dev, rfk); + + return 0; + +err_rfkill: + if (rfk) + rfkill_free(rfk); + rfk = NULL; +err_rfk_alloc: + tosa_bt_off(data); +err_pwr_dir: + gpio_free(data->gpio_pwr); +err_pwr: +err_reset_dir: + gpio_free(data->gpio_reset); +err_reset: + return rc; +} + +static int __devexit tosa_bt_remove(struct platform_device *dev) +{ + struct tosa_bt_data *data = dev->dev.platform_data; + struct rfkill *rfk = platform_get_drvdata(dev); + + platform_set_drvdata(dev, NULL); + + if (rfk) + rfkill_unregister(rfk); + rfk = NULL; + + tosa_bt_off(data); + + gpio_free(data->gpio_pwr); + gpio_free(data->gpio_reset); + + return 0; +} + +static struct platform_driver tosa_bt_driver = { + .probe = tosa_bt_probe, + .remove = __devexit_p(tosa_bt_remove), + + .driver = { + .name = "tosa-bt", + .owner = THIS_MODULE, + }, +}; + + +static int __init tosa_bt_init(void) +{ + return platform_driver_register(&tosa_bt_driver); +} + +static void __exit tosa_bt_exit(void) +{ + platform_driver_unregister(&tosa_bt_driver); +} + +module_init(tosa_bt_init); +module_exit(tosa_bt_exit); diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index ab4a9f5..2d49de5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -18,30 +18,31 @@ #include <linux/major.h> #include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/fb.h> #include <linux/mmc/host.h> +#include <linux/mfd/tc6393xb.h> +#include <linux/mfd/tmio.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> #include <linux/pm.h> -#include <linux/delay.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/gpio.h> +#include <linux/pda_power.h> +#include <linux/rfkill.h> #include <asm/setup.h> -#include <asm/memory.h> #include <asm/mach-types.h> -#include <asm/hardware.h> -#include <asm/irq.h> -#include <asm/system.h> -#include <asm/arch/pxa-regs.h> #include <asm/arch/pxa2xx-regs.h> #include <asm/arch/mfp-pxa25x.h> #include <asm/arch/irda.h> #include <asm/arch/i2c.h> #include <asm/arch/mmc.h> #include <asm/arch/udc.h> +#include <asm/arch/tosa_bt.h> #include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> #include <asm/arch/tosa.h> #include <asm/hardware/scoop.h> @@ -86,7 +87,7 @@ static unsigned long tosa_pin_config[] = { GPIO6_MMC_CLK, GPIO8_MMC_CS0, GPIO9_GPIO, /* Detect */ - // GPIO10 nSD_INT + GPIO10_GPIO, /* nSD_INT */ /* CF */ GPIO13_GPIO, /* CD_IRQ */ @@ -124,29 +125,25 @@ static unsigned long tosa_pin_config[] = { GPIO44_BTUART_CTS, GPIO45_BTUART_RTS, - /* IrDA */ - GPIO46_STUART_RXD, - GPIO47_STUART_TXD, - /* Keybd */ - GPIO58_GPIO, - GPIO59_GPIO, - GPIO60_GPIO, - GPIO61_GPIO, - GPIO62_GPIO, - GPIO63_GPIO, - GPIO64_GPIO, - GPIO65_GPIO, - GPIO66_GPIO, - GPIO67_GPIO, - GPIO68_GPIO, - GPIO69_GPIO, - GPIO70_GPIO, - GPIO71_GPIO, - GPIO72_GPIO, - GPIO73_GPIO, - GPIO74_GPIO, - GPIO75_GPIO, + GPIO58_GPIO | MFP_LPM_DRIVE_LOW, + GPIO59_GPIO | MFP_LPM_DRIVE_LOW, + GPIO60_GPIO | MFP_LPM_DRIVE_LOW, + GPIO61_GPIO | MFP_LPM_DRIVE_LOW, + GPIO62_GPIO | MFP_LPM_DRIVE_LOW, + GPIO63_GPIO | MFP_LPM_DRIVE_LOW, + GPIO64_GPIO | MFP_LPM_DRIVE_LOW, + GPIO65_GPIO | MFP_LPM_DRIVE_LOW, + GPIO66_GPIO | MFP_LPM_DRIVE_LOW, + GPIO67_GPIO | MFP_LPM_DRIVE_LOW, + GPIO68_GPIO | MFP_LPM_DRIVE_LOW, + GPIO69_GPIO | MFP_LPM_DRIVE_LOW, + GPIO70_GPIO | MFP_LPM_DRIVE_LOW, + GPIO71_GPIO | MFP_LPM_DRIVE_LOW, + GPIO72_GPIO | MFP_LPM_DRIVE_LOW, + GPIO73_GPIO | MFP_LPM_DRIVE_LOW, + GPIO74_GPIO | MFP_LPM_DRIVE_LOW, + GPIO75_GPIO | MFP_LPM_DRIVE_LOW, /* SPI */ GPIO81_SSP2_CLK_OUT, @@ -154,6 +151,17 @@ static unsigned long tosa_pin_config[] = { GPIO83_SSP2_TXD, }; +static unsigned long tosa_pin_irda_off[] = { + GPIO46_STUART_RXD, + GPIO47_GPIO | MFP_LPM_DRIVE_LOW, +}; + +static unsigned long tosa_pin_irda_on[] = { + GPIO46_STUART_RXD, + GPIO47_STUART_TXD, +}; + + /* * SCOOP Device */ @@ -249,6 +257,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250); + err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n"); + goto err_gpio_detect; + } + err = gpio_direction_input(TOSA_GPIO_nSD_DETECT); + if (err) + goto err_gpio_detect_dir; + err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int, IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, "MMC/SD card detect", data); @@ -257,7 +274,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void goto err_irq; } - err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp"); + err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n"); goto err_gpio_wp; @@ -266,7 +283,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_wp_dir; - err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr"); + err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power"); if (err) { printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); goto err_gpio_pwr; @@ -275,8 +292,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void if (err) goto err_gpio_pwr_dir; + err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int"); + if (err) { + printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n"); + goto err_gpio_int; + } + err = gpio_direction_input(TOSA_GPIO_nSD_INT); + if (err) + goto err_gpio_int_dir; + return 0; +err_gpio_int_dir: + gpio_free(TOSA_GPIO_nSD_INT); +err_gpio_int: err_gpio_pwr_dir: gpio_free(TOSA_GPIO_PWR_ON); err_gpio_pwr: @@ -285,6 +314,9 @@ err_gpio_wp_dir: err_gpio_wp: free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); err_irq: +err_gpio_detect_dir: + gpio_free(TOSA_GPIO_nSD_DETECT); +err_gpio_detect: return err; } @@ -306,9 +338,11 @@ static int tosa_mci_get_ro(struct device *dev) static void tosa_mci_exit(struct device *dev, void *data) { + gpio_free(TOSA_GPIO_nSD_INT); gpio_free(TOSA_GPIO_PWR_ON); gpio_free(TOSA_GPIO_SD_WP); free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data); + gpio_free(TOSA_GPIO_nSD_DETECT); } static struct pxamci_platform_data tosa_mci_platform_data = { @@ -322,29 +356,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = { /* * Irda */ +static void tosa_irda_transceiver_mode(struct device *dev, int mode) +{ + if (mode & IR_OFF) { + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); + gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + } else { + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_on)); + gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1); + } +} + static int tosa_irda_startup(struct device *dev) { int ret; + ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX"); + if (ret) + goto err_tx; + ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0); + if (ret) + goto err_tx_dir; + ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown"); if (ret) - return ret; + goto err_pwr; ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0); if (ret) - gpio_free(TOSA_GPIO_IR_POWERDWN); + goto err_pwr_dir; - return ret; - } + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); -static void tosa_irda_shutdown(struct device *dev) -{ + return 0; + +err_pwr_dir: gpio_free(TOSA_GPIO_IR_POWERDWN); +err_pwr: +err_tx_dir: + gpio_free(TOSA_GPIO_IRDA_TX); +err_tx: + return ret; } -static void tosa_irda_transceiver_mode(struct device *dev, int mode) +static void tosa_irda_shutdown(struct device *dev) { - gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF)); + tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF); + gpio_free(TOSA_GPIO_IR_POWERDWN); + gpio_free(TOSA_GPIO_IRDA_TX); } static struct pxaficp_platform_data tosa_ficp_platform_data = { @@ -355,6 +415,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = { }; /* + * Tosa AC IN + */ +static int tosa_power_init(struct device *dev) +{ + int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in"); + if (ret) + goto err_gpio_req; + + ret = gpio_direction_input(TOSA_GPIO_AC_IN); + if (ret) + goto err_gpio_in; + + return 0; + +err_gpio_in: + gpio_free(TOSA_GPIO_AC_IN); +err_gpio_req: + return ret; +} + +static void tosa_power_exit(struct device *dev) +{ + gpio_free(TOSA_GPIO_AC_IN); +} + +static int tosa_power_ac_online(void) +{ + return gpio_get_value(TOSA_GPIO_AC_IN) == 0; +} + +static char *tosa_ac_supplied_to[] = { + "main-battery", + "backup-battery", + "jacket-battery", +}; + +static struct pda_power_pdata tosa_power_data = { + .init = tosa_power_init, + .is_ac_online = tosa_power_ac_online, + .exit = tosa_power_exit, + .supplied_to = tosa_ac_supplied_to, + .num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to), +}; + +static struct resource tosa_power_resource[] = { + { + .name = "ac", + .start = gpio_to_irq(TOSA_GPIO_AC_IN), + .end = gpio_to_irq(TOSA_GPIO_AC_IN), + .flags = IORESOURCE_IRQ | + IORESOURCE_IRQ_HIGHEDGE | + IORESOURCE_IRQ_LOWEDGE, + }, +}; + +static struct platform_device tosa_power_device = { + .name = "pda-power", + .id = -1, + .dev.platform_data = &tosa_power_data, + .resource = tosa_power_resource, + .num_resources = ARRAY_SIZE(tosa_power_resource), +}; + +/* * Tosa Keyboard */ static struct platform_device tosakbd_device = { @@ -439,7 +563,7 @@ static struct gpio_led tosa_gpio_leds[] = { }, { .name = "tosa:blue:bluetooth", - .default_trigger = "none", + .default_trigger = "tosa-bt", .gpio = TOSA_GPIO_BT_LED, }, }; @@ -457,21 +581,184 @@ static struct platform_device tosaled_device = { }, }; +/* + * Toshiba Mobile IO Controller + */ +static struct resource tc6393xb_resources[] = { + [0] = { + .start = TOSA_LCDC_PHYS, + .end = TOSA_LCDC_PHYS + 0x3ffffff, + .flags = IORESOURCE_MEM, + }, + + [1] = { + .start = TOSA_IRQ_GPIO_TC6393XB_INT, + .end = TOSA_IRQ_GPIO_TC6393XB_INT, + .flags = IORESOURCE_IRQ, + }, +}; + + +static int tosa_tc6393xb_enable(struct platform_device *dev) +{ + int rc; + + rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr"); + if (rc) + goto err_req_pclr; + rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend"); + if (rc) + goto err_req_suspend; + rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v"); + if (rc) + goto err_req_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0); + if (rc) + goto err_dir_l3v; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0); + if (rc) + goto err_dir_suspend; + rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0); + if (rc) + goto err_dir_pclr; + + mdelay(1); + + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + + mdelay(10); + + gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + + return 0; +err_dir_pclr: +err_dir_suspend: +err_dir_l3v: + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); +err_req_l3v: + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); +err_req_suspend: + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); +err_req_pclr: + return rc; +} + +static int tosa_tc6393xb_disable(struct platform_device *dev) +{ + gpio_free(TOSA_GPIO_TC6393XB_L3V_ON); + gpio_free(TOSA_GPIO_TC6393XB_SUSPEND); + gpio_free(TOSA_GPIO_TC6393XB_REST_IN); + + return 0; +} + +static int tosa_tc6393xb_resume(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1); + mdelay(10); + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1); + mdelay(10); + + return 0; +} + +static int tosa_tc6393xb_suspend(struct platform_device *dev) +{ + gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0); + gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0); + return 0; +} + +static struct mtd_partition tosa_nand_partition[] = { + { + .name = "smf", + .offset = 0, + .size = 7 * 1024 * 1024, + }, + { + .name = "root", + .offset = MTDPART_OFS_APPEND, + .size = 28 * 1024 * 1024, + }, + { + .name = "home", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; + +static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = { + .options = 0, + .offs = 4, + .len = 2, + .pattern = scan_ff_pattern +}; + +static struct tmio_nand_data tosa_tc6393xb_nand_config = { + .num_partitions = ARRAY_SIZE(tosa_nand_partition), + .partition = tosa_nand_partition, + .badblock_pattern = &tosa_tc6393xb_nand_bbt, +}; + +static struct tc6393xb_platform_data tosa_tc6393xb_setup = { + .scr_pll2cr = 0x0cc1, + .scr_gper = 0x3300, + .scr_gpo_dsr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + .scr_gpo_doecr = + TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON), + + .irq_base = IRQ_BOARD_START, + .gpio_base = TOSA_TC6393XB_GPIO_BASE, + + .enable = tosa_tc6393xb_enable, + .disable = tosa_tc6393xb_disable, + .suspend = tosa_tc6393xb_suspend, + .resume = tosa_tc6393xb_resume, + + .nand_data = &tosa_tc6393xb_nand_config, +}; + + +static struct platform_device tc6393xb_device = { + .name = "tc6393xb", + .id = -1, + .dev = { + .platform_data = &tosa_tc6393xb_setup, + }, + .num_resources = ARRAY_SIZE(tc6393xb_resources), + .resource = tc6393xb_resources, +}; + +static struct tosa_bt_data tosa_bt_data = { + .gpio_pwr = TOSA_GPIO_BT_PWR_EN, + .gpio_reset = TOSA_GPIO_BT_RESET, +}; + +static struct platform_device tosa_bt_device = { + .name = "tosa-bt", + .id = -1, + .dev.platform_data = &tosa_bt_data, +}; + + static struct platform_device *devices[] __initdata = { &tosascoop_device, &tosascoop_jc_device, + &tc6393xb_device, + &tosa_power_device, &tosakbd_device, &tosa_gpio_keys_device, &tosaled_device, + &tosa_bt_device, }; static void tosa_poweroff(void) { - gpio_direction_output(TOSA_GPIO_ON_RESET, 0); - gpio_set_value(TOSA_GPIO_ON_RESET, 1); - - mdelay(1000); - arm_machine_restart('h'); + arm_machine_restart('g'); } static void tosa_restart(char mode) @@ -485,10 +772,15 @@ static void tosa_restart(char mode) static void __init tosa_init(void) { + int dummy; + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config)); + pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_irda_off)); gpio_set_wake(MFP_PIN_GPIO1, 1); /* We can't pass to gpio-keys since it will drop the Reset altfunc */ + init_gpio_reset(TOSA_GPIO_ON_RESET); + pm_power_off = tosa_poweroff; arm_pm_restart = tosa_restart; @@ -497,6 +789,10 @@ static void __init tosa_init(void) /* enable batt_fault */ PMCR = 0x01; + dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12); + dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16); + pxa_set_mci_info(&tosa_mci_platform_data); pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); diff --git a/drivers/input/keyboard/tosakbd.c b/drivers/input/keyboard/tosakbd.c index 94e444b..b12b7ee 100644 --- a/drivers/input/keyboard/tosakbd.c +++ b/drivers/input/keyboard/tosakbd.c @@ -215,8 +215,6 @@ static int tosakbd_suspend(struct platform_device *dev, pm_message_t state) unsigned long flags; spin_lock_irqsave(&tosakbd->lock, flags); - PGSR1 = (PGSR1 & ~TOSA_GPIO_LOW_STROBE_BIT); - PGSR2 = (PGSR2 & ~TOSA_GPIO_HIGH_STROBE_BIT); tosakbd->suspended = 1; spin_unlock_irqrestore(&tosakbd->lock, flags); diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ae96bd6..0f6a885 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -5,6 +5,10 @@ menu "Multifunction device drivers" depends on HAS_IOMEM +config MFD_CORE + tristate + default n + config MFD_SM501 tristate "Support for Silicon Motion SM501" ---help--- @@ -38,6 +42,13 @@ config HTC_PASIC3 HTC Magician devices, respectively. Actual functionality is handled by the leds-pasic3 and ds1wm drivers. +config MFD_TC6393XB + bool "Support Toshiba TC6393XB" + depends on HAVE_GPIO_LIB + select MFD_CORE + help + Support for Toshiba Mobile IO Controller TC6393XB + endmenu menu "Multimedia Capabilities Port drivers" diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index eef4e26..33daa2f 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -8,6 +8,10 @@ obj-$(CONFIG_MFD_ASIC3) += asic3.o obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o +obj-$(CONFIG_MFD_TC6393XB) += tc6393xb.o + +obj-$(CONFIG_MFD_CORE) += mfd-core.o + obj-$(CONFIG_MCP) += mcp-core.o obj-$(CONFIG_MCP_SA11X0) += mcp-sa11x0.o obj-$(CONFIG_MCP_UCB1200) += ucb1x00-core.o diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c new file mode 100644 index 0000000..d7d88ce --- /dev/null +++ b/drivers/mfd/mfd-core.c @@ -0,0 +1,114 @@ +/* + * drivers/mfd/mfd-core.c + * + * core MFD support + * Copyright (c) 2006 Ian Molton + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mfd/core.h> + +static int mfd_add_device(struct platform_device *parent, + const struct mfd_cell *cell, + struct resource *mem_base, + int irq_base) +{ + struct resource res[cell->num_resources]; + struct platform_device *pdev; + int ret = -ENOMEM; + int r; + + pdev = platform_device_alloc(cell->name, parent->id); + if (!pdev) + goto fail_alloc; + + pdev->dev.parent = &parent->dev; + + ret = platform_device_add_data(pdev, + cell, sizeof(struct mfd_cell)); + if (ret) + goto fail_device; + + memzero(res, sizeof(res)); + for (r = 0; r < cell->num_resources; r++) { + res[r].name = cell->resources[r].name; + res[r].flags = cell->resources[r].flags; + + /* Find out base to use */ + if (cell->resources[r].flags & IORESOURCE_MEM) { + res[r].parent = mem_base; + res[r].start = mem_base->start + + cell->resources[r].start; + res[r].end = mem_base->start + + cell->resources[r].end; + } else if (cell->resources[r].flags & IORESOURCE_IRQ) { + res[r].start = irq_base + + cell->resources[r].start; + res[r].end = irq_base + + cell->resources[r].end; + } else { + res[r].parent = cell->resources[r].parent; + res[r].start = cell->resources[r].start; + res[r].end = cell->resources[r].end; + } + } + + platform_device_add_resources(pdev, res, cell->num_resources); + + ret = platform_device_add(pdev); + if (ret) + goto fail_device; + + return 0; + +/* platform_device_del(pdev); */ +fail_device: + platform_device_put(pdev); +fail_alloc: + return ret; +} + +int mfd_add_devices( + struct platform_device *parent, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base) +{ + int i; + int ret = 0; + + for (i = 0; i < n_devs; i++) { + ret = mfd_add_device(parent, cells + i, mem_base, irq_base); + if (ret) + break; + } + + if (ret) + mfd_remove_devices(parent); + + return ret; +} +EXPORT_SYMBOL(mfd_add_devices); + +static int mfd_remove_devices_fn(struct device *dev, void *unused) +{ + platform_device_unregister( + container_of(dev, struct platform_device, dev)); + return 0; +} + +void mfd_remove_devices(struct platform_device *parent) +{ + device_for_each_child(&parent->dev, NULL, mfd_remove_devices_fn); +} +EXPORT_SYMBOL(mfd_remove_devices); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov"); diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c new file mode 100644 index 0000000..2d87501 --- /dev/null +++ b/drivers/mfd/tc6393xb.c @@ -0,0 +1,600 @@ +/* + * Toshiba TC6393XB SoC support + * + * Copyright(c) 2005-2006 Chris Humbert + * Copyright(c) 2005 Dirk Opfer + * Copyright(c) 2005 Ian Molton <spyro@f2s.com> + * Copyright(c) 2007 Dmitry Baryshkov + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * Based on locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/clk.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tmio.h> +#include <linux/mfd/tc6393xb.h> +#include <linux/gpio.h> + +#define SCR_REVID 0x08 /* b Revision ID */ +#define SCR_ISR 0x50 /* b Interrupt Status */ +#define SCR_IMR 0x52 /* b Interrupt Mask */ +#define SCR_IRR 0x54 /* b Interrupt Routing */ +#define SCR_GPER 0x60 /* w GP Enable */ +#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */ +#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */ +#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */ +#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */ +#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */ +#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */ +#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */ +#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */ +#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */ +#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */ +#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */ +#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */ +#define SCR_CCR 0x98 /* w Clock Control */ +#define SCR_PLL2CR 0x9a /* w PLL2 Control */ +#define SCR_PLL1CR 0x9c /* l PLL1 Control */ +#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */ +#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */ +#define SCR_FER 0xe0 /* b Function Enable */ +#define SCR_MCR 0xe4 /* w Mode Control */ +#define SCR_CONFIG 0xfc /* b Configuration Control */ +#define SCR_DEBUG 0xff /* b Debug */ + +#define SCR_CCR_CK32K BIT(0) +#define SCR_CCR_USBCK BIT(1) +#define SCR_CCR_UNK1 BIT(4) +#define SCR_CCR_MCLK_MASK (7 << 8) +#define SCR_CCR_MCLK_OFF (0 << 8) +#define SCR_CCR_MCLK_12 (1 << 8) +#define SCR_CCR_MCLK_24 (2 << 8) +#define SCR_CCR_MCLK_48 (3 << 8) +#define SCR_CCR_HCLK_MASK (3 << 12) +#define SCR_CCR_HCLK_24 (0 << 12) +#define SCR_CCR_HCLK_48 (1 << 12) + +#define SCR_FER_USBEN BIT(0) /* USB host enable */ +#define SCR_FER_LCDCVEN BIT(1) /* polysilicon TFT enable */ +#define SCR_FER_SLCDEN BIT(2) /* SLCD enable */ + +#define SCR_MCR_RDY_MASK (3 << 0) +#define SCR_MCR_RDY_OPENDRAIN (0 << 0) +#define SCR_MCR_RDY_TRISTATE (1 << 0) +#define SCR_MCR_RDY_PUSHPULL (2 << 0) +#define SCR_MCR_RDY_UNK BIT(2) +#define SCR_MCR_RDY_EN BIT(3) +#define SCR_MCR_INT_MASK (3 << 4) +#define SCR_MCR_INT_OPENDRAIN (0 << 4) +#define SCR_MCR_INT_TRISTATE (1 << 4) +#define SCR_MCR_INT_PUSHPULL (2 << 4) +#define SCR_MCR_INT_UNK BIT(6) +#define SCR_MCR_INT_EN BIT(7) +/* bits 8 - 16 are unknown */ + +#define TC_GPIO_BIT(i) (1 << (i & 0x7)) + +/*--------------------------------------------------------------------------*/ + +struct tc6393xb { + void __iomem *scr; + + struct gpio_chip gpio; + + struct clk *clk; /* 3,6 Mhz */ + + spinlock_t lock; /* protects RMW cycles */ + + struct { + u8 fer; + u16 ccr; + u8 gpi_bcr[3]; + u8 gpo_dsr[3]; + u8 gpo_doecr[3]; + } suspend_state; + + struct resource rscr; + struct resource *iomem; + int irq; + int irq_base; +}; + +enum { + TC6393XB_CELL_NAND, +}; + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_nand_enable(struct platform_device *nand) +{ + struct platform_device *dev = to_platform_device(nand->dev.parent); + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + /* SMD buffer on */ + dev_dbg(&dev->dev, "SMD buffer on\n"); + iowrite8(0xff, tc6393xb->scr + SCR_GPI_BCR(1)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static struct resource __devinitdata tc6393xb_nand_resources[] = { + { + .name = TMIO_NAND_CONFIG, + .start = 0x0100, + .end = 0x01ff, + .flags = IORESOURCE_MEM, + }, + { + .name = TMIO_NAND_CONTROL, + .start = 0x1000, + .end = 0x1007, + .flags = IORESOURCE_MEM, + }, + { + .name = TMIO_NAND_IRQ, + .start = IRQ_TC6393_NAND, + .end = IRQ_TC6393_NAND, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell __devinitdata tc6393xb_cells[] = { + [TC6393XB_CELL_NAND] = { + .name = "tmio-nand", + .enable = tc6393xb_nand_enable, + .num_resources = ARRAY_SIZE(tc6393xb_nand_resources), + .resources = tc6393xb_nand_resources, + }, +}; + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_gpio_get(struct gpio_chip *chip, + unsigned offset) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + + /* XXX: does dsr also represent inputs? */ + return ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)) + & TC_GPIO_BIT(offset); +} + +static void __tc6393xb_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + u8 dsr; + + dsr = ioread8(tc6393xb->scr + SCR_GPO_DSR(offset / 8)); + if (value) + dsr |= TC_GPIO_BIT(offset); + else + dsr &= ~TC_GPIO_BIT(offset); + + iowrite8(dsr, tc6393xb->scr + SCR_GPO_DSR(offset / 8)); +} + +static void tc6393xb_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + __tc6393xb_gpio_set(chip, offset, value); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static int tc6393xb_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + u8 doecr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + doecr &= ~TC_GPIO_BIT(offset); + iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct tc6393xb *tc6393xb = container_of(chip, struct tc6393xb, gpio); + unsigned long flags; + u8 doecr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + + __tc6393xb_gpio_set(chip, offset, value); + + doecr = ioread8(tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + doecr |= TC_GPIO_BIT(offset); + iowrite8(doecr, tc6393xb->scr + SCR_GPO_DOECR(offset / 8)); + + spin_unlock_irqrestore(&tc6393xb->lock, flags); + + return 0; +} + +static int tc6393xb_register_gpio(struct tc6393xb *tc6393xb, int gpio_base) +{ + tc6393xb->gpio.label = "tc6393xb"; + tc6393xb->gpio.base = gpio_base; + tc6393xb->gpio.ngpio = 16; + tc6393xb->gpio.set = tc6393xb_gpio_set; + tc6393xb->gpio.get = tc6393xb_gpio_get; + tc6393xb->gpio.direction_input = tc6393xb_gpio_direction_input; + tc6393xb->gpio.direction_output = tc6393xb_gpio_direction_output; + + return gpiochip_add(&tc6393xb->gpio); +} + +/*--------------------------------------------------------------------------*/ + +static void +tc6393xb_irq(unsigned int irq, struct irq_desc *desc) +{ + struct tc6393xb *tc6393xb = get_irq_data(irq); + unsigned int isr; + unsigned int i, irq_base; + + irq_base = tc6393xb->irq_base; + + while ((isr = ioread8(tc6393xb->scr + SCR_ISR) & + ~ioread8(tc6393xb->scr + SCR_IMR))) + for (i = 0; i < TC6393XB_NR_IRQS; i++) { + if (isr & (1 << i)) + generic_handle_irq(irq_base + i); + } +} + +static void tc6393xb_irq_ack(unsigned int irq) +{ +} + +static void tc6393xb_irq_mask(unsigned int irq) +{ + struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + unsigned long flags; + u8 imr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + imr = ioread8(tc6393xb->scr + SCR_IMR); + imr |= 1 << (irq - tc6393xb->irq_base); + iowrite8(imr, tc6393xb->scr + SCR_IMR); + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static void tc6393xb_irq_unmask(unsigned int irq) +{ + struct tc6393xb *tc6393xb = get_irq_chip_data(irq); + unsigned long flags; + u8 imr; + + spin_lock_irqsave(&tc6393xb->lock, flags); + imr = ioread8(tc6393xb->scr + SCR_IMR); + imr &= ~(1 << (irq - tc6393xb->irq_base)); + iowrite8(imr, tc6393xb->scr + SCR_IMR); + spin_unlock_irqrestore(&tc6393xb->lock, flags); +} + +static struct irq_chip tc6393xb_chip = { + .name = "tc6393xb", + .ack = tc6393xb_irq_ack, + .mask = tc6393xb_irq_mask, + .unmask = tc6393xb_irq_unmask, +}; + +static void tc6393xb_attach_irq(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned int irq, irq_base; + + irq_base = tc6393xb->irq_base; + + for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) { + set_irq_chip(irq, &tc6393xb_chip); + set_irq_chip_data(irq, tc6393xb); + set_irq_handler(irq, handle_edge_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + + set_irq_type(tc6393xb->irq, IRQT_FALLING); + set_irq_data(tc6393xb->irq, tc6393xb); + set_irq_chained_handler(tc6393xb->irq, tc6393xb_irq); +} + +static void tc6393xb_detach_irq(struct platform_device *dev) +{ + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + unsigned int irq, irq_base; + + set_irq_chained_handler(tc6393xb->irq, NULL); + set_irq_data(tc6393xb->irq, NULL); + + irq_base = tc6393xb->irq_base; + + for (irq = irq_base; irq < irq_base + TC6393XB_NR_IRQS; irq++) { + set_irq_flags(irq, 0); + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } +} + +/*--------------------------------------------------------------------------*/ + +static int tc6393xb_hw_init(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int i; + + iowrite8(tc6393xb->suspend_state.fer, tc6393xb->scr + SCR_FER); + iowrite16(tcpd->scr_pll2cr, tc6393xb->scr + SCR_PLL2CR); + iowrite16(tc6393xb->suspend_state.ccr, tc6393xb->scr + SCR_CCR); + iowrite16(SCR_MCR_RDY_OPENDRAIN | SCR_MCR_RDY_UNK | SCR_MCR_RDY_EN | + SCR_MCR_INT_OPENDRAIN | SCR_MCR_INT_UNK | SCR_MCR_INT_EN | + BIT(15), tc6393xb->scr + SCR_MCR); + iowrite16(tcpd->scr_gper, tc6393xb->scr + SCR_GPER); + iowrite8(0, tc6393xb->scr + SCR_IRR); + iowrite8(0xbf, tc6393xb->scr + SCR_IMR); + + for (i = 0; i < 3; i++) { + iowrite8(tc6393xb->suspend_state.gpo_dsr[i], + tc6393xb->scr + SCR_GPO_DSR(i)); + iowrite8(tc6393xb->suspend_state.gpo_doecr[i], + tc6393xb->scr + SCR_GPO_DOECR(i)); + iowrite8(tc6393xb->suspend_state.gpi_bcr[i], + tc6393xb->scr + SCR_GPI_BCR(i)); + } + + return 0; +} + +static int __devinit tc6393xb_probe(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb; + struct resource *iomem; + struct resource *rscr; + int retval, temp; + int i; + + iomem = platform_get_resource(dev, IORESOURCE_MEM, 0); + if (!iomem) + return -EINVAL; + + tc6393xb = kzalloc(sizeof *tc6393xb, GFP_KERNEL); + if (!tc6393xb) { + retval = -ENOMEM; + goto err_kzalloc; + } + + spin_lock_init(&tc6393xb->lock); + + platform_set_drvdata(dev, tc6393xb); + tc6393xb->iomem = iomem; + tc6393xb->irq = platform_get_irq(dev, 0); + tc6393xb->irq_base = tcpd->irq_base; + + tc6393xb->clk = clk_get(&dev->dev, "GPIO27_CLK" /* "CK3P6MI" */); + if (IS_ERR(tc6393xb->clk)) { + retval = PTR_ERR(tc6393xb->clk); + goto err_clk_get; + } + + rscr = &tc6393xb->rscr; + rscr->name = "tc6393xb-core"; + rscr->start = iomem->start; + rscr->end = iomem->start + 0xff; + rscr->flags = IORESOURCE_MEM; + + retval = request_resource(iomem, rscr); + if (retval) + goto err_request_scr; + + tc6393xb->scr = ioremap(rscr->start, rscr->end - rscr->start + 1); + if (!tc6393xb->scr) { + retval = -ENOMEM; + goto err_ioremap; + } + + retval = clk_enable(tc6393xb->clk); + if (retval) + goto err_clk_enable; + + retval = tcpd->enable(dev); + if (retval) + goto err_enable; + + tc6393xb->suspend_state.fer = 0; + for (i = 0; i < 3; i++) { + tc6393xb->suspend_state.gpo_dsr[i] = + (tcpd->scr_gpo_dsr >> (8 * i)) & 0xff; + tc6393xb->suspend_state.gpo_doecr[i] = + (tcpd->scr_gpo_doecr >> (8 * i)) & 0xff; + } + /* + * It may be necessary to change this back to + * platform-dependant code + */ + tc6393xb->suspend_state.ccr = SCR_CCR_UNK1 | + SCR_CCR_HCLK_48; + + retval = tc6393xb_hw_init(dev); + if (retval) + goto err_hw_init; + + printk(KERN_INFO "Toshiba tc6393xb revision %d at 0x%08lx, irq %d\n", + ioread8(tc6393xb->scr + SCR_REVID), + (unsigned long) iomem->start, tc6393xb->irq); + + tc6393xb->gpio.base = -1; + + if (tcpd->gpio_base >= 0) { + retval = tc6393xb_register_gpio(tc6393xb, tcpd->gpio_base); + if (retval) + goto err_gpio_add; + } + + if (tc6393xb->irq) + tc6393xb_attach_irq(dev); + + tc6393xb_cells[TC6393XB_CELL_NAND].driver_data = tcpd->nand_data; + + retval = mfd_add_devices(dev, + tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), + iomem, tcpd->irq_base); + + return 0; + + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + +err_gpio_add: + if (tc6393xb->gpio.base != -1) + temp = gpiochip_remove(&tc6393xb->gpio); +err_hw_init: + tcpd->disable(dev); +err_clk_enable: + clk_disable(tc6393xb->clk); +err_enable: + iounmap(tc6393xb->scr); +err_ioremap: + release_resource(&tc6393xb->rscr); +err_request_scr: + clk_put(tc6393xb->clk); +err_clk_get: + kfree(tc6393xb); +err_kzalloc: + return retval; +} + +static int __devexit tc6393xb_remove(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int ret; + + mfd_remove_devices(dev); + + if (tc6393xb->irq) + tc6393xb_detach_irq(dev); + + if (tc6393xb->gpio.base != -1) { + ret = gpiochip_remove(&tc6393xb->gpio); + if (ret) { + dev_err(&dev->dev, "Can't remove gpio chip: %d\n", ret); + return ret; + } + } + + ret = tcpd->disable(dev); + + clk_disable(tc6393xb->clk); + + iounmap(tc6393xb->scr); + + release_resource(&tc6393xb->rscr); + + platform_set_drvdata(dev, NULL); + + clk_put(tc6393xb->clk); + + kfree(tc6393xb); + + return ret; +} + +#ifdef CONFIG_PM +static int tc6393xb_suspend(struct platform_device *dev, pm_message_t state) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + struct tc6393xb *tc6393xb = platform_get_drvdata(dev); + int i; + + + tc6393xb->suspend_state.ccr = ioread16(tc6393xb->scr + SCR_CCR); + tc6393xb->suspend_state.fer = ioread8(tc6393xb->scr + SCR_FER); + + for (i = 0; i < 3; i++) { + tc6393xb->suspend_state.gpo_dsr[i] = + ioread8(tc6393xb->scr + SCR_GPO_DSR(i)); + tc6393xb->suspend_state.gpo_doecr[i] = + ioread8(tc6393xb->scr + SCR_GPO_DOECR(i)); + tc6393xb->suspend_state.gpi_bcr[i] = + ioread8(tc6393xb->scr + SCR_GPI_BCR(i)); + } + + return tcpd->suspend(dev); +} + +static int tc6393xb_resume(struct platform_device *dev) +{ + struct tc6393xb_platform_data *tcpd = dev->dev.platform_data; + int ret = tcpd->resume(dev); + + if (ret) + return ret; + + return tc6393xb_hw_init(dev); +} +#else +#define tc6393xb_suspend NULL +#define tc6393xb_resume NULL +#endif + +static struct platform_driver tc6393xb_driver = { + .probe = tc6393xb_probe, + .remove = __devexit_p(tc6393xb_remove), + .suspend = tc6393xb_suspend, + .resume = tc6393xb_resume, + + .driver = { + .name = "tc6393xb", + .owner = THIS_MODULE, + }, +}; + +static int __init tc6393xb_init(void) +{ + return platform_driver_register(&tc6393xb_driver); +} + +static void __exit tc6393xb_exit(void) +{ + platform_driver_unregister(&tc6393xb_driver); +} + +subsys_initcall(tc6393xb_init); +module_exit(tc6393xb_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Ian Molton, Dmitry Baryshkov and Dirk Opfer"); +MODULE_DESCRIPTION("tc6393xb Toshiba Mobile IO Controller"); +MODULE_ALIAS("platform:tc6393xb"); diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h index b6a8317..09868de 100644 --- a/include/asm-arm/arch-pxa/hardware.h +++ b/include/asm-arm/arch-pxa/hardware.h @@ -208,6 +208,11 @@ extern void pxa_gpio_set_value(unsigned gpio, int value); */ extern unsigned int get_memclk_frequency_10khz(void); +/* + * register GPIO as reset generator + */ +extern int init_gpio_reset(int gpio); + #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) diff --git a/include/asm-arm/arch-pxa/irqs.h b/include/asm-arm/arch-pxa/irqs.h index b6c8fe3..fa05e76 100644 --- a/include/asm-arm/arch-pxa/irqs.h +++ b/include/asm-arm/arch-pxa/irqs.h @@ -180,6 +180,7 @@ #define NR_IRQS (IRQ_LOCOMO_SPI_TEND + 1) #elif defined(CONFIG_ARCH_LUBBOCK) || \ defined(CONFIG_MACH_LOGICPD_PXA270) || \ + defined(CONFIG_MACH_TOSA) || \ defined(CONFIG_MACH_MAINSTONE) || \ defined(CONFIG_MACH_PCM027) || \ defined(CONFIG_MACH_MAGICIAN) diff --git a/include/asm-arm/arch-pxa/system.h b/include/asm-arm/arch-pxa/system.h index ba7e132..6956fc5 100644 --- a/include/asm-arm/arch-pxa/system.h +++ b/include/asm-arm/arch-pxa/system.h @@ -21,19 +21,4 @@ static inline void arch_idle(void) } -static inline void arch_reset(char mode) -{ - if (cpu_is_pxa2xx()) - RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR; - - if (mode == 's') { - /* Jump into ROM at address 0 */ - cpu_reset(0); - } else { - /* Initialize the watchdog and let it fire */ - OWER = OWER_WME; - OSSR = OSSR_M3; - OSMR3 = OSCR + 368640; /* ... in 100 ms */ - } -} - +void arch_reset(char mode); diff --git a/include/asm-arm/arch-pxa/tosa.h b/include/asm-arm/arch-pxa/tosa.h index c5b6fde..a72803f 100644 --- a/include/asm-arm/arch-pxa/tosa.h +++ b/include/asm-arm/arch-pxa/tosa.h @@ -25,21 +25,18 @@ */ #define TOSA_SCOOP_GPIO_BASE NR_BUILTIN_GPIO #define TOSA_SCOOP_PXA_VCORE1 SCOOP_GPCR_PA11 -#define TOSA_SCOOP_TC6393_REST_IN SCOOP_GPCR_PA12 +#define TOSA_GPIO_TC6393XB_REST_IN (TOSA_SCOOP_GPIO_BASE + 1) #define TOSA_GPIO_IR_POWERDWN (TOSA_SCOOP_GPIO_BASE + 2) #define TOSA_GPIO_SD_WP (TOSA_SCOOP_GPIO_BASE + 3) #define TOSA_GPIO_PWR_ON (TOSA_SCOOP_GPIO_BASE + 4) #define TOSA_SCOOP_AUD_PWR_ON SCOOP_GPCR_PA16 -#define TOSA_SCOOP_BT_RESET SCOOP_GPCR_PA17 -#define TOSA_SCOOP_BT_PWR_EN SCOOP_GPCR_PA18 +#define TOSA_GPIO_BT_RESET (TOSA_SCOOP_GPIO_BASE + 6) +#define TOSA_GPIO_BT_PWR_EN (TOSA_SCOOP_GPIO_BASE + 7) #define TOSA_SCOOP_AC_IN_OL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_IO_DIR ( TOSA_SCOOP_PXA_VCORE1 | TOSA_SCOOP_TC6393_REST_IN | \ - TOSA_SCOOP_AUD_PWR_ON |\ - TOSA_SCOOP_BT_RESET | TOSA_SCOOP_BT_PWR_EN ) -/* GPIO out put level when init 1: Hi */ -#define TOSA_SCOOP_IO_OUT ( TOSA_SCOOP_TC6393_REST_IN ) +#define TOSA_SCOOP_IO_DIR (TOSA_SCOOP_PXA_VCORE1 | \ + TOSA_SCOOP_AUD_PWR_ON) /* * SCOOP2 jacket GPIOs @@ -49,16 +46,34 @@ #define TOSA_GPIO_NOTE_LED (TOSA_SCOOP_JC_GPIO_BASE + 1) #define TOSA_GPIO_CHRG_ERR_LED (TOSA_SCOOP_JC_GPIO_BASE + 2) #define TOSA_GPIO_USB_PULLUP (TOSA_SCOOP_JC_GPIO_BASE + 3) -#define TOSA_SCOOP_JC_TC6393_SUSPEND SCOOP_GPCR_PA15 -#define TOSA_SCOOP_JC_TC3693_L3V_ON SCOOP_GPCR_PA16 +#define TOSA_GPIO_TC6393XB_SUSPEND (TOSA_SCOOP_JC_GPIO_BASE + 4) +#define TOSA_GPIO_TC6393XB_L3V_ON (TOSA_SCOOP_JC_GPIO_BASE + 5) #define TOSA_SCOOP_JC_WLAN_DETECT SCOOP_GPCR_PA17 #define TOSA_GPIO_WLAN_LED (TOSA_SCOOP_JC_GPIO_BASE + 7) #define TOSA_SCOOP_JC_CARD_LIMIT_SEL SCOOP_GPCR_PA19 /* GPIO Direction 1 : output mode / 0:input mode */ -#define TOSA_SCOOP_JC_IO_DIR ( \ - TOSA_SCOOP_JC_TC6393_SUSPEND | TOSA_SCOOP_JC_TC3693_L3V_ON | \ - TOSA_SCOOP_JC_CARD_LIMIT_SEL ) +#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL) + +/* + * TC6393XB GPIOs + */ +#define TOSA_TC6393XB_GPIO_BASE (NR_BUILTIN_GPIO + 2 * 12) +#define TOSA_TC6393XB_GPIO(i) (TOSA_TC6393XB_GPIO_BASE + (i)) +#define TOSA_TC6393XB_GPIO_BIT(gpio) (1 << (gpio - TOSA_TC6393XB_GPIO_BASE)) + +#define TOSA_GPIO_TG_ON (TOSA_TC6393XB_GPIO_BASE + 0) +#define TOSA_GPIO_L_MUTE (TOSA_TC6393XB_GPIO_BASE + 1) +#define TOSA_GPIO_BL_C20MA (TOSA_TC6393XB_GPIO_BASE + 3) +#define TOSA_GPIO_CARD_VCC_ON (TOSA_TC6393XB_GPIO_BASE + 4) +#define TOSA_GPIO_CHARGE_OFF (TOSA_TC6393XB_GPIO_BASE + 6) +#define TOSA_GPIO_CHARGE_OFF_JC (TOSA_TC6393XB_GPIO_BASE + 7) +#define TOSA_GPIO_BAT0_V_ON (TOSA_TC6393XB_GPIO_BASE + 9) +#define TOSA_GPIO_BAT1_V_ON (TOSA_TC6393XB_GPIO_BASE + 10) +#define TOSA_GPIO_BU_CHRG_ON (TOSA_TC6393XB_GPIO_BASE + 11) +#define TOSA_GPIO_BAT_SW_ON (TOSA_TC6393XB_GPIO_BASE + 12) +#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14) +#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15) /* * Timing Generator @@ -84,13 +99,13 @@ #define TOSA_GPIO_JACKET_DETECT (7) #define TOSA_GPIO_nSD_DETECT (9) #define TOSA_GPIO_nSD_INT (10) -#define TOSA_GPIO_TC6393_CLK (11) +#define TOSA_GPIO_TC6393XB_CLK (11) #define TOSA_GPIO_BAT1_CRG (12) #define TOSA_GPIO_CF_CD (13) #define TOSA_GPIO_BAT0_CRG (14) -#define TOSA_GPIO_TC6393_INT (15) +#define TOSA_GPIO_TC6393XB_INT (15) #define TOSA_GPIO_BAT0_LOW (17) -#define TOSA_GPIO_TC6393_RDY (18) +#define TOSA_GPIO_TC6393XB_RDY (18) #define TOSA_GPIO_ON_RESET (19) #define TOSA_GPIO_EAR_IN (20) #define TOSA_GPIO_CF_IRQ (21) /* CF slot0 Ready */ @@ -99,6 +114,7 @@ #define TOSA_GPIO_TP_INT (32) /* Touch Panel pen down interrupt */ #define TOSA_GPIO_JC_CF_IRQ (36) /* CF slot1 Ready */ #define TOSA_GPIO_BAT_LOCKED (38) /* Battery locked */ +#define TOSA_GPIO_IRDA_TX (47) #define TOSA_GPIO_TG_SPI_SCLK (81) #define TOSA_GPIO_TG_SPI_CS (82) #define TOSA_GPIO_TG_SPI_MOSI (83) @@ -137,7 +153,7 @@ #define TOSA_IRQ_GPIO_BAT1_CRG IRQ_GPIO(TOSA_GPIO_BAT1_CRG) #define TOSA_IRQ_GPIO_CF_CD IRQ_GPIO(TOSA_GPIO_CF_CD) #define TOSA_IRQ_GPIO_BAT0_CRG IRQ_GPIO(TOSA_GPIO_BAT0_CRG) -#define TOSA_IRQ_GPIO_TC6393_INT IRQ_GPIO(TOSA_GPIO_TC6393_INT) +#define TOSA_IRQ_GPIO_TC6393XB_INT IRQ_GPIO(TOSA_GPIO_TC6393XB_INT) #define TOSA_IRQ_GPIO_BAT0_LOW IRQ_GPIO(TOSA_GPIO_BAT0_LOW) #define TOSA_IRQ_GPIO_EAR_IN IRQ_GPIO(TOSA_GPIO_EAR_IN) #define TOSA_IRQ_GPIO_CF_IRQ IRQ_GPIO(TOSA_GPIO_CF_IRQ) diff --git a/include/asm-arm/arch-pxa/tosa_bt.h b/include/asm-arm/arch-pxa/tosa_bt.h new file mode 100644 index 0000000..efc3c3d --- /dev/null +++ b/include/asm-arm/arch-pxa/tosa_bt.h @@ -0,0 +1,22 @@ +/* + * Tosa bluetooth built-in chip control. + * + * Later it may be shared with some other platforms. + * + * Copyright (c) 2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef TOSA_BT_H +#define TOSA_BT_H + +struct tosa_bt_data { + int gpio_pwr; + int gpio_reset; +}; + +#endif + diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h new file mode 100644 index 0000000..bb3dd05 --- /dev/null +++ b/include/linux/mfd/core.h @@ -0,0 +1,55 @@ +#ifndef MFD_CORE_H +#define MFD_CORE_H +/* + * drivers/mfd/mfd-core.h + * + * core MFD support + * Copyright (c) 2006 Ian Molton + * Copyright (c) 2007 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/platform_device.h> + +/* + * This struct describes the MFD part ("cell"). + * After registration the copy of this structure will become the platform data + * of the resulting platform_device + */ +struct mfd_cell { + const char *name; + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + void *driver_data; /* driver-specific data */ + + /* + * This resources can be specified relatievly to the parent device. + * For accessing device you should use resources from device + */ + int num_resources; + const struct resource *resources; +}; + +static inline struct mfd_cell * +mfd_get_cell(struct platform_device *pdev) +{ + return (struct mfd_cell *)pdev->dev.platform_data; +} + +extern int mfd_add_devices( + struct platform_device *parent, + const struct mfd_cell *cells, int n_devs, + struct resource *mem_base, + int irq_base); + +extern void mfd_remove_devices(struct platform_device *parent); + +#endif diff --git a/include/linux/mfd/tc6393xb.h b/include/linux/mfd/tc6393xb.h new file mode 100644 index 0000000..7cc824a --- /dev/null +++ b/include/linux/mfd/tc6393xb.h @@ -0,0 +1,49 @@ +/* + * Toshiba TC6393XB SoC support + * + * Copyright(c) 2005-2006 Chris Humbert + * Copyright(c) 2005 Dirk Opfer + * Copyright(c) 2005 Ian Molton <spyro@f2s.com> + * Copyright(c) 2007 Dmitry Baryshkov + * + * Based on code written by Sharp/Lineo for 2.4 kernels + * Based on locomo.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef TC6393XB_H +#define TC6393XB_H + +/* Also one should provide the CK3P6MI clock */ +struct tc6393xb_platform_data { + u16 scr_pll2cr; /* PLL2 Control */ + u16 scr_gper; /* GP Enable */ + u32 scr_gpo_doecr; /* GPO Data OE Control */ + u32 scr_gpo_dsr; /* GPO Data Set */ + + int (*enable)(struct platform_device *dev); + int (*disable)(struct platform_device *dev); + int (*suspend)(struct platform_device *dev); + int (*resume)(struct platform_device *dev); + + int irq_base; /* a base for cascaded irq */ + int gpio_base; + + struct tmio_nand_data *nand_data; +}; + +/* + * Relative to irq_base + */ +#define IRQ_TC6393_NAND 0 +#define IRQ_TC6393_MMC 1 +#define IRQ_TC6393_OHCI 2 +#define IRQ_TC6393_SERIAL 3 +#define IRQ_TC6393_FB 4 + +#define TC6393XB_NR_IRQS 8 + +#endif diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h new file mode 100644 index 0000000..9438d8c --- /dev/null +++ b/include/linux/mfd/tmio.h @@ -0,0 +1,17 @@ +#ifndef MFD_TMIO_H +#define MFD_TMIO_H + +/* + * data for the NAND controller + */ +struct tmio_nand_data { + struct nand_bbt_descr *badblock_pattern; + struct mtd_partition *partition; + unsigned int num_partitions; +}; + +#define TMIO_NAND_CONFIG "tmio-nand-config" +#define TMIO_NAND_CONTROL "tmio-nand-control" +#define TMIO_NAND_IRQ "tmio-nand" + +#endif diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index 484f883..329b33f 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -48,6 +48,7 @@ config SND_PXA2XX_SOC_POODLE config SND_PXA2XX_SOC_TOSA tristate "SoC AC97 Audio support for Tosa" depends on SND_PXA2XX_SOC && MACH_TOSA + depends on MFD_TC6393XB select SND_PXA2XX_SOC_AC97 select SND_SOC_WM9712 help diff --git a/sound/soc/pxa/tosa.c b/sound/soc/pxa/tosa.c index 7346d7e..c1462c4 100644 --- a/sound/soc/pxa/tosa.c +++ b/sound/soc/pxa/tosa.c @@ -24,6 +24,7 @@ #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/device.h> +#include <linux/gpio.h> #include <sound/core.h> #include <sound/pcm.h> @@ -31,7 +32,7 @@ #include <sound/soc-dapm.h> #include <asm/mach-types.h> -#include <asm/hardware/tmio.h> +#include <asm/arch/tosa.h> #include <asm/arch/pxa-regs.h> #include <asm/arch/hardware.h> #include <asm/arch/audio.h> @@ -138,10 +139,7 @@ static int tosa_set_spk(struct snd_kcontrol *kcontrol, static int tosa_hp_event(struct snd_soc_dapm_widget *w, struct snd_kcontrol *k, int event) { - if (SND_SOC_DAPM_EVENT_ON(event)) - set_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); - else - reset_tc6393_gpio(&tc6393_device.dev,TOSA_TC6393_L_MUTE); + gpio_set_value(TOSA_GPIO_L_MUTE, SND_SOC_DAPM_EVENT_ON(event) ? 1 :0); return 0; } @@ -261,16 +259,28 @@ static int __init tosa_init(void) if (!machine_is_tosa()) return -ENODEV; + ret = gpio_request(TOSA_GPIO_L_MUTE, "Headphone Jack"); + if (ret) + return ret; + gpio_direction_output(TOSA_GPIO_L_MUTE, 0); + tosa_snd_device = platform_device_alloc("soc-audio", -1); - if (!tosa_snd_device) - return -ENOMEM; + if (!tosa_snd_device) { + ret = -ENOMEM; + goto err_alloc; + } platform_set_drvdata(tosa_snd_device, &tosa_snd_devdata); tosa_snd_devdata.dev = &tosa_snd_device->dev; ret = platform_device_add(tosa_snd_device); - if (ret) - platform_device_put(tosa_snd_device); + if (!ret) + return 0; + + platform_device_put(tosa_snd_device); + +err_alloc: + gpio_free(TOSA_GPIO_L_MUTE); return ret; } @@ -278,6 +288,7 @@ static int __init tosa_init(void) static void __exit tosa_exit(void) { platform_device_unregister(tosa_snd_device); + gpio_free(TOSA_GPIO_L_MUTE); } module_init(tosa_init); |