Merge remote-tracking branch 'android/android-3.0' into HEAD

Conflicts:
	drivers/net/wireless/bcmdhd/dhd_linux.c
	drivers/net/wireless/bcmdhd/wl_cfg80211.c
	drivers/net/wireless/bcmdhd/wl_cfg80211.h

1 files changed, 139 insertions, 4 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index a2a97f3..748de7b 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -1177,14 +1177,32 @@ struct cfg80211_wowlan_trig_pkt_pattern {
  * @magic_pkt: wake up on receiving magic packet
  * @patterns: wake up on receiving packet matching a pattern
  * @n_patterns: number of patterns
+ * @gtk_rekey_failure: wake up on GTK rekey failure
+ * @eap_identity_req: wake up on EAP identity request packet
+ * @four_way_handshake: wake up on 4-way handshake
+ * @rfkill_release: wake up when rfkill is released
  */
 struct cfg80211_wowlan {
-	bool any, disconnect, magic_pkt;
+	bool any, disconnect, magic_pkt, gtk_rekey_failure,
+	     eap_identity_req, four_way_handshake,
+	     rfkill_release;
 	struct cfg80211_wowlan_trig_pkt_pattern *patterns;
 	int n_patterns;
 };
 
 /**
+ * struct cfg80211_gtk_rekey_data - rekey data
+ * @kek: key encryption key
+ * @kck: key confirmation key
+ * @replay_ctr: replay counter
+ */
+struct cfg80211_gtk_rekey_data {
+	u8 kek[NL80211_KEK_LEN];
+	u8 kck[NL80211_KCK_LEN];
+	u8 replay_ctr[NL80211_REPLAY_CTR_LEN];
+};
+
+/**
  * struct cfg80211_ops - backend description for wireless configuration
  *
  * This struct is registered by fullmac card drivers and/or wireless stacks
@@ -1228,6 +1246,8 @@ struct cfg80211_wowlan {
  *
  * @set_default_mgmt_key: set the default management frame key on an interface
  *
+ * @set_rekey_data: give the data necessary for GTK rekeying to the driver
+ *
  * @add_beacon: Add a beacon with given parameters, @head, @interval
  *	and @dtim_period will be valid, @tail is optional.
  * @set_beacon: Change the beacon parameters for an access point mode
@@ -1345,6 +1365,12 @@ struct cfg80211_wowlan {
  * @set_ringparam: Set tx and rx ring sizes.
  *
  * @get_ringparam: Get tx and rx ring current and maximum sizes.
+ *
+ * @tdls_mgmt: Transmit a TDLS management frame.
+ * @tdls_oper: Perform a high-level TDLS operation (e.g. TDLS link setup).
+ *
+ * @probe_client: probe an associated client, must return a cookie that it
+ *	later passes to cfg80211_probe_status().
  */
 struct cfg80211_ops {
 	int	(*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@@ -1521,6 +1547,18 @@ struct cfg80211_ops {
 				struct net_device *dev,
 				struct cfg80211_sched_scan_request *request);
 	int	(*sched_scan_stop)(struct wiphy *wiphy, struct net_device *dev);
+
+	int	(*set_rekey_data)(struct wiphy *wiphy, struct net_device *dev,
+				  struct cfg80211_gtk_rekey_data *data);
+
+	int	(*tdls_mgmt)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, u8 action_code,  u8 dialog_token,
+			     u16 status_code, const u8 *buf, size_t len);
+	int	(*tdls_oper)(struct wiphy *wiphy, struct net_device *dev,
+			     u8 *peer, enum nl80211_tdls_operation oper);
+
+	int	(*probe_client)(struct wiphy *wiphy, struct net_device *dev,
+				const u8 *peer, u64 *cookie);
 };
 
 /*
@@ -1570,6 +1608,19 @@ struct cfg80211_ops {
  * @WIPHY_FLAG_MESH_AUTH: The device supports mesh authentication by routing
  *	auth frames to userspace. See @NL80211_MESH_SETUP_USERSPACE_AUTH.
  * @WIPHY_FLAG_SUPPORTS_SCHED_SCAN: The device supports scheduled scans.
+ * @WIPHY_FLAG_SUPPORTS_FW_ROAM: The device supports roaming feature in the
+ *	firmware.
+ * @WIPHY_FLAG_AP_UAPSD: The device supports uapsd on AP.
+ * @WIPHY_FLAG_SUPPORTS_TDLS: The device supports TDLS (802.11z) operation.
+ * @WIPHY_FLAG_TDLS_EXTERNAL_SETUP: The device does not handle TDLS (802.11z)
+ *	link setup/discovery operations internally. Setup, discovery and
+ *	teardown packets should be sent through the @NL80211_CMD_TDLS_MGMT
+ *	command. When this flag is not set, @NL80211_CMD_TDLS_OPER should be
+ *	used for asking the driver/firmware to perform a TDLS operation.
+ * @WIPHY_FLAG_HAVE_AP_SME: device integrates AP SME
+ * @WIPHY_FLAG_REPORTS_OBSS: the device will report beacons from other BSSes
+ *	when there are virtual interfaces in AP mode by calling
+ *	cfg80211_report_obss_beacon().
  */
 enum wiphy_flags {
 	WIPHY_FLAG_CUSTOM_REGULATORY		= BIT(0),
@@ -1584,6 +1635,12 @@ enum wiphy_flags {
 	WIPHY_FLAG_MESH_AUTH			= BIT(10),
 	WIPHY_FLAG_SUPPORTS_SCHED_SCAN		= BIT(11),
 	WIPHY_FLAG_ENFORCE_COMBINATIONS		= BIT(12),
+	WIPHY_FLAG_SUPPORTS_FW_ROAM		= BIT(13),
+	WIPHY_FLAG_AP_UAPSD			= BIT(14),
+	WIPHY_FLAG_SUPPORTS_TDLS		= BIT(15),
+	WIPHY_FLAG_TDLS_EXTERNAL_SETUP		= BIT(16),
+	WIPHY_FLAG_HAVE_AP_SME			= BIT(17),
+	WIPHY_FLAG_REPORTS_OBSS			= BIT(18),
 };
 
 /**
@@ -1678,11 +1735,21 @@ struct ieee80211_txrx_stypes {
  * @WIPHY_WOWLAN_MAGIC_PKT: supports wakeup on magic packet
  *	(see nl80211.h)
  * @WIPHY_WOWLAN_DISCONNECT: supports wakeup on disconnect
+ * @WIPHY_WOWLAN_SUPPORTS_GTK_REKEY: supports GTK rekeying while asleep
+ * @WIPHY_WOWLAN_GTK_REKEY_FAILURE: supports wakeup on GTK rekey failure
+ * @WIPHY_WOWLAN_EAP_IDENTITY_REQ: supports wakeup on EAP identity request
+ * @WIPHY_WOWLAN_4WAY_HANDSHAKE: supports wakeup on 4-way handshake failure
+ * @WIPHY_WOWLAN_RFKILL_RELEASE: supports wakeup on RF-kill release
  */
 enum wiphy_wowlan_support_flags {
-	WIPHY_WOWLAN_ANY	= BIT(0),
-	WIPHY_WOWLAN_MAGIC_PKT	= BIT(1),
-	WIPHY_WOWLAN_DISCONNECT	= BIT(2),
+	WIPHY_WOWLAN_ANY		= BIT(0),
+	WIPHY_WOWLAN_MAGIC_PKT		= BIT(1),
+	WIPHY_WOWLAN_DISCONNECT		= BIT(2),
+	WIPHY_WOWLAN_SUPPORTS_GTK_REKEY	= BIT(3),
+	WIPHY_WOWLAN_GTK_REKEY_FAILURE	= BIT(4),
+	WIPHY_WOWLAN_EAP_IDENTITY_REQ	= BIT(5),
+	WIPHY_WOWLAN_4WAY_HANDSHAKE	= BIT(6),
+	WIPHY_WOWLAN_RFKILL_RELEASE	= BIT(7),
 };
 
 /**
@@ -1781,6 +1848,8 @@ struct wiphy_wowlan_support {
  *	may request, if implemented.
  *
  * @wowlan: WoWLAN support information
+ *
+ * @ap_sme_capa: AP SME capabilities, flags from &enum nl80211_ap_sme_features.
  */
 struct wiphy {
 	/* assign these fields before you register the wiphy */
@@ -1804,6 +1873,8 @@ struct wiphy {
 
 	u32 flags;
 
+	u32 ap_sme_capa;
+
 	enum cfg80211_signal_type signal_type;
 
 	int bss_priv_size;
@@ -2054,6 +2125,8 @@ struct wireless_dev {
 
 	int beacon_interval;
 
+	u32 ap_unexpected_nlpid;
+
 #ifdef CONFIG_CFG80211_WEXT
 	/* wext data */
 	struct {
@@ -3063,6 +3136,68 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev,
 void cfg80211_cqm_pktloss_notify(struct net_device *dev,
 				 const u8 *peer, u32 num_packets, gfp_t gfp);
 
+/**
+ * cfg80211_gtk_rekey_notify - notify userspace about driver rekeying
+ * @dev: network device
+ * @bssid: BSSID of AP (to avoid races)
+ * @replay_ctr: new replay counter
+ */
+void cfg80211_gtk_rekey_notify(struct net_device *dev, const u8 *bssid,
+			       const u8 *replay_ctr, gfp_t gfp);
+
+/**
+ * cfg80211_pmksa_candidate_notify - notify about PMKSA caching candidate
+ * @dev: network device
+ * @index: candidate index (the smaller the index, the higher the priority)
+ * @bssid: BSSID of AP
+ * @preauth: Whether AP advertises support for RSN pre-authentication
+ * @gfp: allocation flags
+ */
+void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index,
+				     const u8 *bssid, bool preauth, gfp_t gfp);
+
+/**
+ * cfg80211_rx_spurious_frame - inform userspace about a spurious frame
+ * @dev: The device the frame matched to
+ * @addr: the transmitter address
+ * @gfp: context flags
+ *
+ * This function is used in AP mode (only!) to inform userspace that
+ * a spurious class 3 frame was received, to be able to deauth the
+ * sender.
+ * Returns %true if the frame was passed to userspace (or this failed
+ * for a reason other than not having a subscription.)
+ */
+bool cfg80211_rx_spurious_frame(struct net_device *dev,
+				const u8 *addr, gfp_t gfp);
+
+/**
+ * cfg80211_probe_status - notify userspace about probe status
+ * @dev: the device the probe was sent on
+ * @addr: the address of the peer
+ * @cookie: the cookie filled in @probe_client previously
+ * @acked: indicates whether probe was acked or not
+ * @gfp: allocation flags
+ */
+void cfg80211_probe_status(struct net_device *dev, const u8 *addr,
+			   u64 cookie, bool acked, gfp_t gfp);
+
+/**
+ * cfg80211_report_obss_beacon - report beacon from other APs
+ * @wiphy: The wiphy that received the beacon
+ * @frame: the frame
+ * @len: length of the frame
+ * @freq: frequency the frame was received on
+ * @gfp: allocation flags
+ *
+ * Use this function to report to userspace when a beacon was
+ * received. It is not useful to call this when there is no
+ * netdev that is in AP/GO mode.
+ */
+void cfg80211_report_obss_beacon(struct wiphy *wiphy,
+				 const u8 *frame, size_t len,
+				 int freq, gfp_t gfp);
+
 /* Logging, debugging and troubleshooting/diagnostic helpers. */
 
 /* wiphy_printk helpers, similar to dev_printk */