aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorH. Nikolaus Schaller <hns@goldelico.com>2012-04-20 14:13:13 +0200
committerH. Nikolaus Schaller <hns@goldelico.com>2012-04-20 14:13:13 +0200
commit8a096e250cd4eafa42cc44ec40a4f76d336f8616 (patch)
treeeb78d44f840c4d31f2883f0c35b71b89d0ee47e7
parent819e36b8ceadb1d67db1ffe91b99c5282bfc6159 (diff)
downloadbootable_bootloader_goldelico_gta04_x-loader-8a096e250cd4eafa42cc44ec40a4f76d336f8616.zip
bootable_bootloader_goldelico_gta04_x-loader-8a096e250cd4eafa42cc44ec40a4f76d336f8616.tar.gz
bootable_bootloader_goldelico_gta04_x-loader-8a096e250cd4eafa42cc44ec40a4f76d336f8616.tar.bz2
cleaned old uart-monitor and uart-loader which have become part of x-loader
-rw-r--r--board/omap3530gta04/config.mk2
-rw-r--r--include/configs/omap3530gta04.h4
-rw-r--r--uart-loader/.gitignore50
-rw-r--r--uart-loader/Makefile222
-rw-r--r--uart-loader/README152
-rw-r--r--uart-loader/arm_config.mk24
-rw-r--r--uart-loader/board/omap3430labrador/Makefile47
-rw-r--r--uart-loader/board/omap3430labrador/config.mk22
-rw-r--r--uart-loader/board/omap3430labrador/omap3430labrador.c875
-rw-r--r--uart-loader/board/omap3430labrador/platform.S218
-rw-r--r--uart-loader/common/Makefile48
-rw-r--r--uart-loader/common/cmd_load.c841
-rw-r--r--uart-loader/config.mk175
-rw-r--r--uart-loader/cpu/omap3/Makefile43
-rw-r--r--uart-loader/cpu/omap3/config.mk32
-rw-r--r--uart-loader/cpu/omap3/cpu.c51
l---------uart-loader/cpu/omap3/mmc.c1
l---------uart-loader/cpu/omap3/mmc_host_def.h1
l---------uart-loader/cpu/omap3/mmc_protocol.h1
-rw-r--r--uart-loader/cpu/omap3/start.S230
-rw-r--r--uart-loader/cpu/omap3/sys_info.c82
-rw-r--r--uart-loader/disk/Makefile44
-rw-r--r--uart-loader/disk/part.c273
-rw-r--r--uart-loader/drivers/Makefile70
-rw-r--r--uart-loader/drivers/k9f1g08r0a.c512
-rw-r--r--uart-loader/drivers/k9f5616.c229
-rw-r--r--uart-loader/drivers/k9k1216.c258
-rw-r--r--uart-loader/drivers/ns16550.c69
-rw-r--r--uart-loader/drivers/onenand.c203
-rw-r--r--uart-loader/drivers/onenand_regs.h167
-rw-r--r--uart-loader/drivers/serial.c119
-rw-r--r--uart-loader/fs/Makefile29
-rw-r--r--uart-loader/fs/fat/Makefile46
-rw-r--r--uart-loader/fs/fat/fat.c927
-rw-r--r--uart-loader/fs/fat/file.c208
-rw-r--r--uart-loader/include/asm/arch-arm1136/bits.h49
l---------uart-loader/include/asm/arch-arm1136/clocks.h1
l---------uart-loader/include/asm/arch-arm1136/clocks242x.h1
l---------uart-loader/include/asm/arch-arm1136/clocks243x.h1
l---------uart-loader/include/asm/arch-arm1136/mem.h1
-rw-r--r--uart-loader/include/asm/arch-arm1136/omap2420.h223
-rw-r--r--uart-loader/include/asm/arch-arm1136/omap2430.h255
-rw-r--r--uart-loader/include/asm/arch-arm1136/sizes.h50
-rw-r--r--uart-loader/include/asm/arch-arm1136/sys_info.h139
-rw-r--r--uart-loader/include/asm/arch-arm926ejs/sizes.h51
l---------uart-loader/include/asm/arch-omap3/bits.h1
l---------uart-loader/include/asm/arch-omap3/clocks.h1
l---------uart-loader/include/asm/arch-omap3/clocks343x.h1
l---------uart-loader/include/asm/arch-omap3/cpu.h1
l---------uart-loader/include/asm/arch-omap3/dpll_table_34xx.S1
l---------uart-loader/include/asm/arch-omap3/dpll_table_36xx.S1
l---------uart-loader/include/asm/arch-omap3/mem.h1
-rw-r--r--uart-loader/include/asm/arch-omap3/mmc.h187
l---------uart-loader/include/asm/arch-omap3/mux.h1
l---------uart-loader/include/asm/arch-omap3/omap3430.h1
l---------uart-loader/include/asm/arch-omap3/rev.h1
l---------uart-loader/include/asm/arch-omap3/sizes.h1
l---------uart-loader/include/asm/arch-omap3/sys_info.h1
l---------uart-loader/include/asm/arch-omap3/sys_proto.h1
-rw-r--r--uart-loader/include/asm/atomic.h113
l---------uart-loader/include/asm/byteorder.h1
-rw-r--r--uart-loader/include/asm/posix_types.h79
-rw-r--r--uart-loader/include/asm/setup.h269
-rw-r--r--uart-loader/include/asm/sizes.h52
-rw-r--r--uart-loader/include/asm/string.h47
-rw-r--r--uart-loader/include/asm/types.h50
-rw-r--r--uart-loader/include/asm/x-load-arm.h40
l---------uart-loader/include/command.h1
-rw-r--r--uart-loader/include/common.h110
-rw-r--r--uart-loader/include/configs/omap3430labrador.h224
l---------uart-loader/include/fat.h1
l---------uart-loader/include/ide.h1
l---------uart-loader/include/linux/byteorder1
-rw-r--r--uart-loader/include/linux/config.h6
-rw-r--r--uart-loader/include/linux/posix_types.h48
l---------uart-loader/include/linux/stat.h1
-rw-r--r--uart-loader/include/linux/stddef.h18
l---------uart-loader/include/linux/time.h1
-rw-r--r--uart-loader/include/linux/types.h130
l---------uart-loader/include/malloc.h1
l---------uart-loader/include/mmc.h1
-rw-r--r--uart-loader/include/ns16550.h130
l---------uart-loader/include/part.h1
-rw-r--r--uart-loader/lib/Makefile46
-rw-r--r--uart-loader/lib/_udivsi3.S77
-rw-r--r--uart-loader/lib/_umodsi3.S88
-rw-r--r--uart-loader/lib/board.c242
-rw-r--r--uart-loader/lib/div0.c30
-rw-r--r--uart-loader/lib/ecc_256.c329
-rw-r--r--uart-loader/lib/ecc_512.c420
-rw-r--r--uart-loader/lib/printf.c304
-rwxr-xr-xuart-loader/mkconfig61
-rw-r--r--uart-loader/scripts/mkoneboot.sh16
-rw-r--r--uart-loader/scripts/signGP.c73
-rw-r--r--uart-monitor/.gitignore50
-rw-r--r--uart-monitor/Makefile222
-rw-r--r--uart-monitor/README152
-rw-r--r--uart-monitor/arm_config.mk24
-rw-r--r--uart-monitor/board/omap3430labrador/Makefile47
-rw-r--r--uart-monitor/board/omap3430labrador/config.mk22
-rw-r--r--uart-monitor/board/omap3430labrador/omap3430labrador.c875
-rw-r--r--uart-monitor/board/omap3430labrador/platform.S218
-rw-r--r--uart-monitor/common/Makefile48
-rw-r--r--uart-monitor/common/cmd_load.c325
-rw-r--r--uart-monitor/config.mk175
-rw-r--r--uart-monitor/cpu/omap3/Makefile43
-rw-r--r--uart-monitor/cpu/omap3/config.mk32
-rw-r--r--uart-monitor/cpu/omap3/cpu.c51
l---------uart-monitor/cpu/omap3/mmc.c1
l---------uart-monitor/cpu/omap3/mmc_host_def.h1
l---------uart-monitor/cpu/omap3/mmc_protocol.h1
-rw-r--r--uart-monitor/cpu/omap3/start.S230
-rw-r--r--uart-monitor/cpu/omap3/sys_info.c82
-rw-r--r--uart-monitor/disk/Makefile44
-rw-r--r--uart-monitor/disk/part.c273
-rw-r--r--uart-monitor/drivers/Makefile70
-rw-r--r--uart-monitor/drivers/k9f1g08r0a.c512
-rw-r--r--uart-monitor/drivers/k9f5616.c229
-rw-r--r--uart-monitor/drivers/k9k1216.c258
-rw-r--r--uart-monitor/drivers/ns16550.c69
-rw-r--r--uart-monitor/drivers/onenand.c203
-rw-r--r--uart-monitor/drivers/onenand_regs.h167
-rw-r--r--uart-monitor/drivers/serial.c119
-rw-r--r--uart-monitor/fs/Makefile29
-rw-r--r--uart-monitor/fs/fat/Makefile46
-rw-r--r--uart-monitor/fs/fat/fat.c927
-rw-r--r--uart-monitor/fs/fat/file.c208
-rw-r--r--uart-monitor/include/asm/arch-arm1136/bits.h49
l---------uart-monitor/include/asm/arch-arm1136/clocks.h1
l---------uart-monitor/include/asm/arch-arm1136/clocks242x.h1
l---------uart-monitor/include/asm/arch-arm1136/clocks243x.h1
l---------uart-monitor/include/asm/arch-arm1136/mem.h1
-rw-r--r--uart-monitor/include/asm/arch-arm1136/omap2420.h223
-rw-r--r--uart-monitor/include/asm/arch-arm1136/omap2430.h255
-rw-r--r--uart-monitor/include/asm/arch-arm1136/sizes.h50
-rw-r--r--uart-monitor/include/asm/arch-arm1136/sys_info.h139
-rw-r--r--uart-monitor/include/asm/arch-arm926ejs/sizes.h51
l---------uart-monitor/include/asm/arch-omap3/bits.h1
l---------uart-monitor/include/asm/arch-omap3/clocks.h1
l---------uart-monitor/include/asm/arch-omap3/clocks343x.h1
l---------uart-monitor/include/asm/arch-omap3/cpu.h1
l---------uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S1
l---------uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S1
l---------uart-monitor/include/asm/arch-omap3/mem.h1
-rw-r--r--uart-monitor/include/asm/arch-omap3/mmc.h187
l---------uart-monitor/include/asm/arch-omap3/mux.h1
l---------uart-monitor/include/asm/arch-omap3/omap3430.h1
l---------uart-monitor/include/asm/arch-omap3/rev.h1
l---------uart-monitor/include/asm/arch-omap3/sizes.h1
l---------uart-monitor/include/asm/arch-omap3/sys_info.h1
l---------uart-monitor/include/asm/arch-omap3/sys_proto.h1
-rw-r--r--uart-monitor/include/asm/atomic.h113
l---------uart-monitor/include/asm/byteorder.h1
-rw-r--r--uart-monitor/include/asm/posix_types.h79
-rw-r--r--uart-monitor/include/asm/setup.h269
-rw-r--r--uart-monitor/include/asm/sizes.h52
-rw-r--r--uart-monitor/include/asm/string.h47
-rw-r--r--uart-monitor/include/asm/types.h50
-rw-r--r--uart-monitor/include/asm/x-load-arm.h40
l---------uart-monitor/include/command.h1
-rw-r--r--uart-monitor/include/common.h110
-rw-r--r--uart-monitor/include/configs/omap3430labrador.h224
l---------uart-monitor/include/fat.h1
l---------uart-monitor/include/ide.h1
l---------uart-monitor/include/linux/byteorder1
-rw-r--r--uart-monitor/include/linux/config.h6
-rw-r--r--uart-monitor/include/linux/posix_types.h48
l---------uart-monitor/include/linux/stat.h1
-rw-r--r--uart-monitor/include/linux/stddef.h18
l---------uart-monitor/include/linux/time.h1
-rw-r--r--uart-monitor/include/linux/types.h130
l---------uart-monitor/include/malloc.h1
l---------uart-monitor/include/mmc.h1
-rw-r--r--uart-monitor/include/ns16550.h130
l---------uart-monitor/include/part.h1
-rw-r--r--uart-monitor/lib/Makefile46
-rw-r--r--uart-monitor/lib/_udivsi3.S77
-rw-r--r--uart-monitor/lib/_umodsi3.S88
-rw-r--r--uart-monitor/lib/board.c189
-rw-r--r--uart-monitor/lib/div0.c30
-rw-r--r--uart-monitor/lib/ecc_256.c329
-rw-r--r--uart-monitor/lib/ecc_512.c420
-rw-r--r--uart-monitor/lib/printf.c304
-rwxr-xr-xuart-monitor/mkconfig61
-rw-r--r--uart-monitor/scripts/mkoneboot.sh16
-rw-r--r--uart-monitor/scripts/signGP.c73
186 files changed, 3 insertions, 19938 deletions
diff --git a/board/omap3530gta04/config.mk b/board/omap3530gta04/config.mk
index 01eafc1..0122e2f 100644
--- a/board/omap3530gta04/config.mk
+++ b/board/omap3530gta04/config.mk
@@ -20,4 +20,4 @@
# initial stack at 0x4020fffc used in s_init (below xloader).
# The run time stack is (above xloader, 2k below)
# If any globals exist there needs to be room for them also
-TEXT_BASE = 0x40208800
+TEXT_BASE = 0x40200800
diff --git a/include/configs/omap3530gta04.h b/include/configs/omap3530gta04.h
index 3e6ef21..645f48f 100644
--- a/include/configs/omap3530gta04.h
+++ b/include/configs/omap3530gta04.h
@@ -47,7 +47,7 @@
#define CONFIG_BEAGLE_REV2 1
/* Enable the below macro if MMC boot support is required */
-//#define CONFIG_MMC 1
+#define CONFIG_MMC 1
#if defined(CONFIG_MMC)
#define CFG_CMD_MMC 1
#define CFG_CMD_FAT 1
@@ -86,7 +86,7 @@
#define SDRC_R_B_C 1
/* Enable the below macro if NAND boot support is required */
-//#define CONFIG_NAND 1
+#define CONFIG_NAND 1
#define NAND_BASE_ADR NAND_BASE
#define ONENAND_BASE ONENAND_MAP
diff --git a/uart-loader/.gitignore b/uart-loader/.gitignore
deleted file mode 100644
index 5bc6dd2..0000000
--- a/uart-loader/.gitignore
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# NOTE! Don't add files that are generated in specific
-# subdirectories here. Add them in the ".gitignore" file
-# in that subdirectory instead.
-#
-# Normal rules
-#
-.*
-*.o
-*.o.*
-*.a
-*.s
-*.ko
-*.so
-*.so.dbg
-*.mod.c
-*.i
-*.lst
-*.symtypes
-
-#
-# Top-level generic files
-#
-x-load
-x-load.*
-System.map
-include/asm/arch
-include/asm/proc
-include/config.h
-include/config.mk
-!.gitignore
-signGP
-MLO
-
-#
-# Generated include files
-#
-
-# stgit generated dirs
-patches-*
-
-# quilt's files
-patches
-series
-
-# cscope files
-cscope.*
-
-*.orig
-*.rej
diff --git a/uart-loader/Makefile b/uart-loader/Makefile
deleted file mode 100644
index 73f82ec..0000000
--- a/uart-loader/Makefile
+++ /dev/null
@@ -1,222 +0,0 @@
-#
-# (C) Copyright 2004-2006, Texas Instruments, <www.ti.com>
-# Jian Zhang <jzhang@ti.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-HOSTARCH := $(shell uname -m | \
- sed -e s/i.86/i386/ \
- -e s/sun4u/sparc64/ \
- -e s/arm.*/arm/ \
- -e s/sa110/arm/ \
- -e s/powerpc/ppc/ \
- -e s/macppc/ppc/)
-
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
- sed -e 's/\(cygwin\).*/cygwin/')
-
-export HOSTARCH
-
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
-
-#########################################################################
-
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
-
-ifeq (include/config.mk,$(wildcard include/config.mk))
-# load ARCH, BOARD, and CPU configuration
-include include/config.mk
-export ARCH CPU BOARD VENDOR
-# load other configuration
-include $(TOPDIR)/config.mk
-
-ifndef CROSS_COMPILE
-CROSS_COMPILE = arm-none-linux-gnueabi-
-#CROSS_COMPILE = arm-linux-
-export CROSS_COMPILE
-endif
-
-#########################################################################
-# X-LOAD objects....order is important (i.e. start must be first)
-
-OBJS = cpu/$(CPU)/start.o
-
-
-LIBS += board/$(BOARDDIR)/lib$(BOARD).a
-LIBS += cpu/$(CPU)/lib$(CPU).a
-LIBS += lib/lib$(ARCH).a
-LIBS += fs/fat/libfat.a
-LIBS += disk/libdisk.a
-LIBS += drivers/libdrivers.a
-LIBS += common/libcommon.a
-.PHONY : $(LIBS)
-
-# Add GCC lib
-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
-SUBDIRS =
-#########################################################################
-#########################################################################
-
-ALL = x-load.bin System.map
-
-all: $(ALL)
-
-ift: $(ALL) x-load.bin.ift
-
-x-load.bin.ift: signGP System.map x-load.bin
- TEXT_BASE=`grep -w _start System.map|cut -d ' ' -f1`
- ./signGP x-load.bin $(TEXT_BASE)
- cp x-load.bin.ift MLO
-
-x-load.bin: x-load
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-x-load: $(OBJS) $(LIBS) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
- -Map x-load.map -o x-load
-
-$(LIBS):
- $(MAKE) -C `dirname $@`
-
-
-System.map: x-load
- @$(NM) $< | \
- grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
-
-oneboot: x-load.bin
- scripts/mkoneboot.sh
-
-signGP: scripts/signGP.c
- gcc -O3 -o signGP $<
-
-#########################################################################
-else
-all install x-load x-load.srec oneboot depend dep:
- @echo "System not configured - see README" >&2
- @ exit 1
-endif
-
-#########################################################################
-
-unconfig:
- rm -f include/config.h include/config.mk
-
-#========================================================================
-# ARM
-#========================================================================
-#########################################################################
-## OMAP1 (ARM92xT) Systems
-#########################################################################
-
-omap1710h3_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap1710h3
-
-#########################################################################
-## OMAP2 (ARM1136) Systems
-#########################################################################
-
-omap2420h4_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2420h4
-
-omap2430sdp_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2430sdp
-
-#########################################################################
-## OMAP3 (ARM-CortexA8) Systems
-#########################################################################
-omap3430sdp_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430sdp
-omap3430labrador_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3430labradordownload_config : unconfig
- @./mkconfig omap3430labrador arm omap3 omap3430labrador; \
- echo "#define START_LOADB_DOWNLOAD" >> ./include/config-2.h; \
- cat ./include/config.h >> ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3430zoom2_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3430zoom2_512m_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed -e ' s/CONFIG_3430ZOOM2/CONFIG_3430ZOOM2_512M/ ' < \
- ./include/configs/omap3430zoom2.h | \
- sed -e ' s/#define CFG_NAND 1/#undef CFG_NAND/ ' \
- >> ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630zoom3_config : omap3630zoom3_1G_config
-
-omap3630zoom3_512m_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/omap3630zoom3_512m/omap3630zoom3/ < \
- ./include/config.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630zoom3_1G_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/CONFIG_3630ZOOM3/CONFIG_3630ZOOM3_1G/ < \
- ./include/configs/omap3630zoom3.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630sdp_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3630sdp_1G_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/CONFIG_3630SDP/CONFIG_3630SDP_1G/ < \
- ./include/configs/omap3630sdp.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-#########################################################################
-
-clean:
- find . -type f \
- \( -name 'core' -o -name '*.bak' -o -name '*~' \
- -o -name '*.o' -o -name '*.a' \) -print \
- | xargs rm -f
-
-clobber: clean
- find . -type f \
- \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \
- -print \
- | xargs rm -f
- rm -f $(OBJS) *.bak tags TAGS
- rm -fr *.*~
- rm -f x-load x-load.map $(ALL) x-load.bin.ift signGP MLO
- rm -f include/asm/proc include/asm/arch
-
-mrproper \
-distclean: clobber unconfig
-
-backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
- gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
-
-#########################################################################
diff --git a/uart-loader/README b/uart-loader/README
deleted file mode 100644
index ae2662a..0000000
--- a/uart-loader/README
+++ /dev/null
@@ -1,152 +0,0 @@
-#
-# (C) Copyright 2004-2006 Texas Instruments
-#
-# Some cut/paste from U-Boot README
-# (C) Copyright 2000 - 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-Summary:
-========
-
-This directory contains the source code for X-Loader, an initial program
-loader for Embedded boards based on OMAP processors. X-Loader can be
-signed by Texas Instruments IFT and installed to Nand flash to achieve
-Nand booting.
-
-
-Status:
-=======
-
-The support for Texas Instruments H3 board (OMAP1710) has been implemented
-and tested. (May 2004)
-The support for Texas Instruments H4 board (OMAP2420) has been implemented
-and tested. (Nov 2004)
-The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented
-and tested. (Jul 2006)
-The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented
-and tested. (Dec 2006)
-
-
-Support for other OMAP boards can be added.
-
-
-Directory Hierarchy:
-====================
-
-- board Board dependent files
-- cpu CPU specific files
-- drivers Commonly used device drivers
-- lib Libraries
-
-- cpu/arm926ejs Files specific to ARM 926 CPUs
-- cpu/arm1136 Files specific to ARM 1136 CPUs
-- cpu/omap3 Files specific to ARM CortexA8 CPU
-
-
-- board/omap1710h3
- Files specific to OMAP 1710 H3 boards
-- board/omap2420h4
- Files specific to OMAP 2420 H4 boards
-- board/omap2430sdp
- Files specific to OMAP 2430 2430sdp boards
-- board/omap3430sdp
- Files specific to OMAP 3420sdp boards
-
-
-Software Configuration:
-=======================
-
-Configuration is usually done using C preprocessor defines. Configuration
-depends on the combination of board and CPU type; all such information is
-kept in a configuration file "include/configs/<board_name>.h".
-
-Example: For a H3 module, all configuration settings are in
-"include/configs/omap1710h3.h".
-
-For all supported boards there are ready-to-use default
-configurations available; just type "make <board_name>_config".
-
-Example: For a H3 module type:
-
- cd x-load
- make omap1710h3_config
-
-After a board has been configured, type "make" to build it supposing the
-needed cross tools are in your path.
-
-
-Image Format:
-=============
-
-X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using
-JFFS2 style ECC.
-
-
-Prepare Booting Nand Flash:
-===========================
-
-After you have built x-load.bin for your board, you need to do the
-followings to get it into Nand flash:
-
-1. Use Texas Instruments IFT to sign x-load.bin. This results in a
-signed image called x-load.bin.ift.
-2. Use Texas Instruments FlashPrep to generate a .out file using
-FlashWriterNand and specifying 0 as nand target address.
-3. Use Texas instrumnets Code Composer Studio to run the .out file
-which flashes x-load.bin.ift to Nand flash.
-
-Next you need to get your OS boot loader to Nand at the address your
-X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot.
-You can't use FlashWriterNand because it uses ROM code ECC style.
-
-
-More Information
-================
-
-OMAP1710 NAND Booting Design Document has more information.
-
-Implemenation notes:
-====================
-H3, H4 support NAND flash booting
-2430sdp & 3430sdp support OneNAND booting
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- \ No newline at end of file
diff --git a/uart-loader/arm_config.mk b/uart-loader/arm_config.mk
deleted file mode 100644
index 73d9625..0000000
--- a/uart-loader/arm_config.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
diff --git a/uart-loader/board/omap3430labrador/Makefile b/uart-loader/board/omap3430labrador/Makefile
deleted file mode 100644
index c03134c..0000000
--- a/uart-loader/board/omap3430labrador/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS := omap3430labrador.o
-SOBJS := platform.o
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
--include .depend
-
-#########################################################################
diff --git a/uart-loader/board/omap3430labrador/config.mk b/uart-loader/board/omap3430labrador/config.mk
deleted file mode 100644
index d6ad6c5..0000000
--- a/uart-loader/board/omap3430labrador/config.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0
-# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000'0000 (bank1) - re-mappable below CS1
-
-# For use if you want X-Loader to relocate from SRAM to DDR
-#TEXT_BASE = 0x80e80000
-
-# For XIP in 64K of SRAM or debug (GP device has it all availabe)
-# SRAM 40200000-4020FFFF base
-# initial stack at 0x4020fffc used in s_init (below xloader).
-# The run time stack is (above xloader, 2k below)
-# If any globals exist there needs to be room for them also
-TEXT_BASE = 0x40208800
diff --git a/uart-loader/board/omap3430labrador/omap3430labrador.c b/uart-loader/board/omap3430labrador/omap3430labrador.c
deleted file mode 100644
index 1a4e243..0000000
--- a/uart-loader/board/omap3430labrador/omap3430labrador.c
+++ /dev/null
@@ -1,875 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments, <www.ti.com>
- * Jian Zhang <jzhang@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/rev.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/mem.h>
-
-/* Used to index into DPLL parameter tables */
-struct dpll_param {
- unsigned int m;
- unsigned int n;
- unsigned int fsel;
- unsigned int m2;
-};
-
-#ifdef CONFIG_OMAP36XX
-struct dpll_per_param {
- unsigned int sys_clk;
- unsigned int m;
- unsigned int n;
- unsigned int clkin;
- unsigned int sd;
- unsigned int dco;
- unsigned int m2;
- unsigned int m3;
- unsigned int m4;
- unsigned int m5;
- unsigned int m6;
- unsigned int m2div;
-};
-typedef struct dpll_per_param dpll_per_param;
-#define MAX_SIL_INDEX 1
-#else
-typedef struct dpll_param dpll_per_param;
-#define MAX_SIL_INDEX 3
-#endif
-
-typedef struct dpll_param dpll_param;
-
-/* Following functions are exported from lowlevel_init.S */
-extern dpll_param * get_mpu_dpll_param(void);
-extern dpll_param * get_core_dpll_param(void);
-extern dpll_param * get_per_dpll_param(void);
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init (void)
-{
- return 0;
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- int mode;
- mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK);
- return(mode >>= 8);
-}
-
-/*****************************************************************
- * sr32 - clear & set a value in a bit range for a 32 bit address
- *****************************************************************/
-void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
-{
- u32 tmp, msk = 0;
- msk = 1 << num_bits;
- --msk;
- tmp = __raw_readl(addr) & ~(msk << start_bit);
- tmp |= value << start_bit;
- __raw_writel(tmp, addr);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- * volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
- u32 i = 0, val;
- do {
- ++i;
- val = __raw_readl(read_addr) & read_bit_mask;
- if (val == match_value)
- return (1);
- if (i == bound)
- return (0);
- } while (1);
-}
-
-#ifdef CFG_3430SDRAM_DDR
-/*********************************************************************
- * config_3430sdram_ddr() - Init DDR on 3430SDP dev board.
- *********************************************************************/
-void config_3430sdram_ddr(void)
-{
- /* check if its h/w or s/w reset for warm reset workaround */
- if (__raw_readl(PRM_RSTTST) & 0x2) {
- /* Enable SDRC clock & wait SDRC idle status to access*/
- sr32(CM_ICLKEN1_CORE, 1, 1, 0x1);
- wait_on_value(BIT1, 0, CM_IDLEST1_CORE, LDELAY);
- } else {
- /* do a SDRC reset between types to clear regs */
- __raw_writel(SOFTRESET, SDRC_SYSCONFIG);/* reset sdrc */
- /* wait on reset */
- wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
- __raw_writel(0, SDRC_SYSCONFIG);/* clear soft reset */
- }
- /* Clear reset sources */
- __raw_writel(0xfff, PRM_RSTTST);
-
- /* setup sdrc to ball mux */
- __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
-
- /* Configure the first chip select */
- /* set mdcfg */
- __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
-
- /* set timing */
- __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
- __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
- __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_0);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_0);
- delay(5000);
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
-
- /* set mr0 */
- __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0);
-#ifdef CONFIG_2GBDDR
- __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
-
- /* set timing */
- __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_1);
- __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1);
- __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_1);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_1);
- delay(5000);
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
-
- /* set mr0 */
- __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1);
-
- /* Configure cs1 to be just behind cs0 - 128meg boundary */
-#if defined(CONFIG_3430ZOOM2_512M) || \
- defined(CONFIG_3630ZOOM3) || defined(CONFIG_3630SDP)
- /* 2 * 128M = 256M for cs1 */
- __raw_writel(0x2, SDRC_CS_CFG);
-#elif defined(CONFIG_3630SDP_1G) || defined(CONFIG_3630ZOOM3_1G)
- /* 4 * 128M = 512M for cs1 */
- __raw_writel(0x4, SDRC_CS_CFG);
-#else
- /* 1 * 128M = 128M for cs1 */
- __raw_writel(0x1, SDRC_CS_CFG);
-#endif
-
- /* set up dllB-CS1 */
- __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL);
- delay(0x2000); /* give time to lock */
-#endif
-
- /* set up dllA-CS0 */
- __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL);
- delay(0x2000); /* give time to lock */
-
-}
-#endif // CFG_3430SDRAM_DDR
-
-/*************************************************************
- * get_sys_clk_speed - determine reference oscillator speed
- * based on known 32kHz clock and gptimer.
- *************************************************************/
-u32 get_osc_clk_speed(void)
-{
- u32 start, cstart, cend, cdiff, val;
-
- val = __raw_readl(PRM_CLKSRC_CTRL);
- /* If SYS_CLK is being divided by 2, remove for now */
- val = (val & (~BIT7)) | BIT6;
- __raw_writel(val, PRM_CLKSRC_CTRL);
-
- /* enable timer2 */
- val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
- __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */
-
- /* Enable I and F Clocks for GPT1 */
- val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2;
- __raw_writel(val, CM_ICLKEN_WKUP);
- val = __raw_readl(CM_FCLKEN_WKUP) | BIT0;
- __raw_writel(val, CM_FCLKEN_WKUP);
-
- __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */
- __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */
- /* enable 32kHz source *//* enabled out of reset */
- /* determine sys_clk via gauging */
-
- start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */
- while (__raw_readl(S32K_CR) < start); /* dead loop till start time */
- cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */
- while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */
- cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */
- cdiff = cend - cstart; /* get elapsed ticks */
-
- /* based on number of ticks assign speed */
- if (cdiff > 19000)
- return (S38_4M);
- else if (cdiff > 15200)
- return (S26M);
- else if (cdiff > 13000)
- return (S24M);
- else if (cdiff > 9000)
- return (S19_2M);
- else if (cdiff > 7600)
- return (S13M);
- else
- return (S12M);
-}
-
-/******************************************************************************
- * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
- * -- input oscillator clock frequency.
- *
- *****************************************************************************/
-void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
-{
- if(osc_clk == S38_4M)
- *sys_clkin_sel= 4;
- else if(osc_clk == S26M)
- *sys_clkin_sel = 3;
- else if(osc_clk == S19_2M)
- *sys_clkin_sel = 2;
- else if(osc_clk == S13M)
- *sys_clkin_sel = 1;
- else if(osc_clk == S12M)
- *sys_clkin_sel = 0;
-}
-
-static dpll_per_param *_get_per_dpll(int clk_index)
-{
- dpll_per_param *ret = (dpll_per_param *)get_per_dpll_param();
- ret += clk_index;
- return ret;
-}
-
-static dpll_param *_get_mpu_dpll(int clk_index, int sil_index)
-{
- dpll_param *ret = (dpll_param *)get_mpu_dpll_param();
- ret += (MAX_SIL_INDEX * clk_index) + sil_index;
- return ret;
-}
-
-#ifdef CONFIG_OMAP36XX
-
-#define PER_M_BITS 12
-#define PER_M2_BITS 5
-#define PER_M3_BITS 6
-#define PER_M4_BITS 6
-#define PER_M5_BITS 6
-#define PER_M6_BITS 6
-
-static void per_dpll_init_36XX(int clk_index)
-{
- dpll_per_param *per;
-
- per = _get_per_dpll(clk_index);
-
- sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
- wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
-
- sr32(CM_CLKSEL2_PLL, 8, PER_M_BITS, per->m);
- sr32(CM_CLKSEL2_PLL, 0, 7, per->n);
- sr32(PRM_CLKSRC_CTRL, 8, 1, per->clkin);
- sr32(CM_CLKSEL2_PLL, 24, 7, per->sd);
- sr32(CM_CLKSEL2_PLL, 21, 3, per->dco);
- sr32(CM_CLKSEL3_PLL, 0, PER_M2_BITS, per->m2);
- sr32(CM_CLKSEL_DSS, 8, PER_M3_BITS, per->m3);
- sr32(CM_CLKSEL_DSS, 0, PER_M4_BITS, per->m4);
- sr32(CM_CLKSEL_CAM, 0, PER_M5_BITS, per->m5);
- sr32(CM_CLKSEL1_EMU, 24, PER_M6_BITS, per->m6);
- sr32(CM_CLKSEL_CORE, 12, 2, per->m2div);
-
- sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
-}
-
-static void mpu_dpll_init_36XX(int clk_index, int sil_index)
-{
- dpll_param *mpu;
-
- mpu = _get_mpu_dpll(clk_index, sil_index);
-
- /* MPU DPLL (unlocked already) */
- sr32(CM_CLKSEL1_PLL_MPU, 8, 11, mpu->m);
- sr32(CM_CLKSEL1_PLL_MPU, 0, 7, mpu->n);
- sr32(CM_CLKSEL2_PLL_MPU, 0, 5, mpu->m2);
-
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
-}
-
-#else /* 34xx */
-
-#define PER_M_BITS 11
-#define PER_M2_BITS 5
-#define PER_M3_BITS 5
-#define PER_M4_BITS 5
-#define PER_M5_BITS 5
-#define PER_M6_BITS 5
-
-static void per_dpll_init_34XX(int clk_index)
-{
- dpll_per_param *dpll_param_p;
-
- /* Getting the base address to PER DPLL param table*/
- dpll_param_p = (dpll_param *)get_per_dpll_param();
- /* Moving it to the right sysclk base */
- dpll_param_p = dpll_param_p + clk_index;
- /* PER DPLL */
- sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
- wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
- sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */
- sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */
- sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */
- sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */
- sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */
- sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */
- sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */
- sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */
- sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
-}
-
-static void mpu_dpll_init_34XX(int clk_index, int sil_index)
-{
- dpll_param *dpll_param_p;
-
- /* Getting the base address to MPU DPLL param table*/
- dpll_param_p = (dpll_param *)get_mpu_dpll_param();
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index;
- /* MPU DPLL (unlocked already) */
- sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */
- sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */
- sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */
- sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
-}
-
-#endif
-
-/******************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * -- called from SRAM, or Flash (using temp SRAM stack).
- *****************************************************************************/
-void prcm_init(void)
-{
- u32 osc_clk=0, sys_clkin_sel;
- dpll_param *dpll_param_p;
- u32 clk_index, sil_index;
-
- /* Gauge the input clock speed and find out the sys_clkin_sel
- * value corresponding to the input clock.
- */
- osc_clk = get_osc_clk_speed();
- get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
-
- sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
-
-/* Using 26MHz divider straight into OMAP saves ~2ms on OFF mode restore */
-#if 0
- /* If the input clock is greater than 19.2M always divide/2 */
- if(sys_clkin_sel > 2) {
- sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
- clk_index = sys_clkin_sel/2;
- } else
-#endif
- {
- sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
- clk_index = sys_clkin_sel;
- }
-
- sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */
-
- /* The DPLL tables are defined according to sysclk value and
- * silicon revision. The clk_index value will be used to get
- * the values for that input sysclk from the DPLL param table
- * and sil_index will get the values for that SysClk for the
- * appropriate silicon rev.
- */
-#ifdef CONFIG_OMAP36XX
- sil_index = 0;
-#else
- if(cpu_is_3410())
- sil_index = 2;
- else {
- if(get_cpu_rev() == CPU_3XX_ES10)
- sil_index = 0;
- else if(get_cpu_rev() >= CPU_3XX_ES20)
- sil_index = 1;
- }
-#endif
-
- /* Unlock MPU DPLL (slows things down, and needed later) */
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
- wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
-
- /* Getting the base address of Core DPLL param table*/
- dpll_param_p = (dpll_param *)get_core_dpll_param();
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index;
- /* CORE DPLL */
- /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
- sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
- wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
- /* For 3430 ES1.0 Errata 1.50, default value directly doesnt
- work. write another value and then default value. */
- sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */
- sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */
- sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */
- sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */
- sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */
- sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */
- sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */
- sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */
- sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */
- sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */
- sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */
- sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */
- sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */
- sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
-
- /* PER DPLL */
-#ifdef CONFIG_OMAP36XX
- per_dpll_init_36XX(clk_index);
- mpu_dpll_init_36XX(clk_index, sil_index);
-#else
- per_dpll_init_34XX(clk_index);
- mpu_dpll_init_34XX(clk_index, sil_index);
-#endif
-
- /* Set up GPTimers to sys_clk source only */
- sr32(CM_CLKSEL_PER, 0, 8, 0xff);
- sr32(CM_CLKSEL_WKUP, 0, 1, 1);
-
- delay(5000);
-}
-
-/*****************************************
- * Routine: secure_unlock
- * Description: Setup security registers for access
- * (GP Device only)
- *****************************************/
-void secure_unlock(void)
-{
- /* Permission values for registers -Full fledged permissions to all */
- #define UNLOCK_1 0xFFFFFFFF
- #define UNLOCK_2 0x00000000
- #define UNLOCK_3 0x0000FFFF
- /* Protection Module Register Target APE (PM_RT)*/
- __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
- __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
- __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
- __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
-
- __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
- __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
- __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
-
- __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
- __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
- __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
- __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
-
- __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
-}
-
-/**********************************************************
- * Routine: try_unlock_sram()
- * Description: If chip is GP type, unlock the SRAM for
- * general use.
- ***********************************************************/
-void try_unlock_memory(void)
-{
- int mode;
-
- /* if GP device unlock device SRAM for general use */
- /* secure code breaks for Secure/Emulation device - HS/E/T*/
- mode = get_device_type();
- if (mode == GP_DEVICE) {
- secure_unlock();
- }
- return;
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called at time when only stack is available.
- **********************************************************/
-
-void s_init(void)
-{
- watchdog_init();
-#ifdef CONFIG_3430_AS_3410
- /* setup the scalability control register for
- * 3430 to work in 3410 mode
- */
- __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP);
-#endif
- try_unlock_memory();
- set_muxconf_regs();
- delay(100);
- prcm_init();
- per_clocks_enable();
- config_3430sdram_ddr();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r (void)
-{
- return(0);
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
- int pending = 1;
- do {
- pending = __raw_readl(wd_base + WWPS);
- } while (pending);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
- /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
- * either taken care of by ROM (HS/EMU) or not accessible (GP).
- * We need to take care of WD2-MPU or take a PRCM reset. WD3
- * should not be running and does not generate a PRCM reset.
- */
- sr32(CM_FCLKEN_WKUP, 5, 1, 1);
- sr32(CM_ICLKEN_WKUP, 5, 1, 1);
- wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */
-
- __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
- wait_for_command_complete(WD2_BASE);
- __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init (void)
-{
- return 0;
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void per_clocks_enable(void)
-{
- /* Enable GP2 timer. */
- sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */
- sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */
- sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */
-
-#ifdef CFG_NS16550
-////#ifdef CONFIG_SERIAL3
- sr32(CM_FCLKEN_PER, 11, 1, 0x1);
- sr32(CM_ICLKEN_PER, 11, 1, 0x1);
-////#else
- /* Enable UART1 clocks */
- sr32(CM_FCLKEN1_CORE, 13, 1, 0x1);
- sr32(CM_ICLKEN1_CORE, 13, 5, 0x1);
-////#endif
-#endif
- // hns: enable clock for GPIO2-6 http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/p/65520/236545.aspx
- sr32(CM_FCLKEN_PER, 13, 5, 0x1f);
- sr32(CM_ICLKEN_PER, 13, 5, 0x1f);
- // hns: and GPIO1
- sr32(CM_FCLKEN_WKUP, 3, 1, 0x1);
- sr32(CM_ICLKEN_WKUP, 3, 1, 0x1);
- delay(1000);
-}
-
-/* Set MUX for UART, GPMC, SDRC, GPIO */
-
-#define MUX_VAL(OFFSET,VALUE)\
- __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-
-#define CP(x) (CONTROL_PADCONF_##x)
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_DEFAULT()\
- /*SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
- MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
- MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
- MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
- MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
- MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
- MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
- MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
- MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
- MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
- MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
- MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
- MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
- MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
- MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
- MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
- MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
- MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
- MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\
- MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\
-MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/\
- MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
- MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
- MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
- MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
- MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
- MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\
- MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
- MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\
- MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\
- MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\
- MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\
- MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\
-MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\
- MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\
- MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\
- MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\
- MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\
- MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\
- MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\
- MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\
- MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\
- MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\
-MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\
-MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
- MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
- MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
- MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\
- MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- * specific to the hardware. Many pins need
- * to be moved from protect to primary mode.
- *********************************************************/
-void set_muxconf_regs(void)
-{
- MUX_DEFAULT();
-#ifdef CONFIG_2GBDDR
- MUX_VAL(CP(sdrc_cke1), (IDIS | PTU | EN | M0)) /*sdrc_cke1 */
-#endif
-}
-
-/**********************************************************
- * Routine: nand+_init
- * Description: Set up nand for nand and jffs2 commands
- *********************************************************/
-int nand_init(void)
-{
- /* global settings */
- __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
- __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CFG_NAND
- __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
-#endif
-
- /* setup CS0 for Micron NAND, leave other CS's to u-boot */
- __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0);
- delay(1000);
-
-#ifdef CFG_NAND
- __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0);
-
-#elif CFG_ONENAND /* CFG_ONENAND */
- __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0);
-#endif
-
- /* Enable the GPMC Mapping */
- __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) |
- ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) |
- (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0));
- delay(2000);
-
-#ifdef CFG_NAND
- if (nand_chip()){
-#ifdef CFG_PRINTF
- printf("Unsupported Chip!\n");
-#endif
- return 1;
- }
-#elif CFG_ONENAND
- if (onenand_chip()){
-#ifdef CFG_PRINTF
- printf("OneNAND Unsupported !\n");
-#endif
- return 1;
- }
-#endif
- return 0;
-}
-
-/* optionally do something like blinking LED */
-void board_hang (void)
-{
- while (1) {
- printf("X-Loader hangs\n");
- }
-}
diff --git a/uart-loader/board/omap3430labrador/platform.S b/uart-loader/board/omap3430labrador/platform.S
deleted file mode 100644
index 42dfc72..0000000
--- a/uart-loader/board/omap3430labrador/platform.S
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004-2006
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
-
-#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT)
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
- /* Copy DPLL code into SRAM */
- adr r0, go_to_speed /* get addr of clock setting code */
- mov r2, #384 /* r2 size to copy (div by 32 bytes) */
- mov r1, r1 /* r1 <- dest address (passed in) */
- add r2, r2, r0 /* r2 <- source end address */
-next2:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next2
- mov pc, lr /* back to caller */
-
-/* ****************************************************************************
- * NOTE: 3430 X-loader currently does not use this code.
-* It could be removed its is kept for compatabily with u-boot.
- *
- * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- * -executed from SRAM.
- * R0 = CM_CLKEN_PLL-bypass value
- * R1 = CM_CLKSEL1_PLL-m, n, and divider values
- * R2 = CM_CLKSEL_CORE-divider values
- * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- *
- * Note: If core unlocks/relocks and SDRAM is running fast already it gets
- * confused. A reset of the controller gets it back. Taking away its
- * L3 when its not in self refresh seems bad for it. Normally, this code
- * runs from flash before SDR is init so that should be ok.
- ******************************************************************************/
-.global go_to_speed
- go_to_speed:
- stmfd sp!, {r4-r6}
-
- /* move into fast relock bypass */
- ldr r4, pll_ctl_add
- str r0, [r4]
-wait1:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- beq wait1 /* if lock, loop */
-
- /* set new dpll dividers _after_ in bypass */
- ldr r5, pll_div_add1
- str r1, [r5] /* set m, n, m2 */
- ldr r5, pll_div_add2
- str r2, [r5] /* set l3/l4/.. dividers*/
- ldr r5, pll_div_add3 /* wkup */
- ldr r2, pll_div_val3 /* rsm val */
- str r2, [r5]
- ldr r5, pll_div_add4 /* gfx */
- ldr r2, pll_div_val4
- str r2, [r5]
- ldr r5, pll_div_add5 /* emu */
- ldr r2, pll_div_val5
- str r2, [r5]
-
- /* now prepare GPMC (flash) for new dpll speed */
- /* flash needs to be stable when we jump back to it */
- ldr r5, flash_cfg3_addr
- ldr r2, flash_cfg3_val
- str r2, [r5]
- ldr r5, flash_cfg4_addr
- ldr r2, flash_cfg4_val
- str r2, [r5]
- ldr r5, flash_cfg5_addr
- ldr r2, flash_cfg5_val
- str r2, [r5]
- ldr r5, flash_cfg1_addr
- ldr r2, [r5]
- orr r2, r2, #0x3 /* up gpmc divider */
- str r2, [r5]
-
- /* lock DPLL3 and wait a bit */
- orr r0, r0, #0x7 /* set up for lock mode */
- str r0, [r4] /* lock */
- nop /* ARM slow at this point working at sys_clk */
- nop
- nop
- nop
-wait2:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- bne wait2 /* if lock, loop */
- nop
- nop
- nop
- nop
- ldmfd sp!, {r4-r6}
- mov pc, lr /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-/* The Nor has to be in the Flash Base CS0 for this condition to happen */
-flash_cfg1_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
-flash_cfg3_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
-flash_cfg3_val:
- .word STNOR_GPMC_CONFIG3
-flash_cfg4_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
-flash_cfg4_val:
- .word STNOR_GPMC_CONFIG4
-flash_cfg5_val:
- .word STNOR_GPMC_CONFIG5
-flash_cfg5_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
-pll_ctl_add:
- .word CM_CLKEN_PLL
-pll_div_add1:
- .word CM_CLKSEL1_PLL
-pll_div_add2:
- .word CM_CLKSEL_CORE
-pll_div_add3:
- .word CM_CLKSEL_WKUP
-pll_div_val3:
- .word (WKUP_RSM << 1)
-pll_div_add4:
- .word CM_CLKSEL_GFX
-pll_div_val4:
- .word (GFX_DIV << 0)
-pll_div_add5:
- .word CM_CLKSEL1_EMU
-pll_div_val5:
- .word CLSEL1_EMU_VAL
-
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll,mux,memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-REG_CONTROL_STATUS:
- .word CONTROL_STATUS
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
-
-.globl get_mpu_dpll_param
-get_mpu_dpll_param:
- adr r0, mpu_dpll_param
- mov pc, lr
-
-.globl get_iva_dpll_param
-get_iva_dpll_param:
- adr r0, iva_dpll_param
- mov pc, lr
-
-.globl get_core_dpll_param
-get_core_dpll_param:
- adr r0, core_dpll_param
- mov pc, lr
-
-.globl get_per_dpll_param
-get_per_dpll_param:
- adr r0, per_dpll_param
- mov pc, lr
-
-#if defined(CONFIG_OMAP36XX)
-#include <asm/arch/dpll_table_36xx.S>
-#elif defined(CONFIG_OMAP34XX)
-#include <asm/arch/dpll_table_34xx.S>
-#else
-#error "DPLL Table is undefined"
-#endif \ No newline at end of file
diff --git a/uart-loader/common/Makefile b/uart-loader/common/Makefile
deleted file mode 100644
index de856cf..0000000
--- a/uart-loader/common/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = libcommon.a
-
-AOBJS =
-
-COBJS = cmd_load.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-CPPFLAGS += -I..
-
-all: $(LIB) $(AOBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/common/cmd_load.c b/uart-loader/common/cmd_load.c
deleted file mode 100644
index 6bd07e4..0000000
--- a/uart-loader/common/cmd_load.c
+++ /dev/null
@@ -1,841 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Serial up- and download support
- */
-#include <common.h>
-#include <asm/arch/mux.h>
-
-#define putc serial_putc
-#define tstc serial_tstc
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-static inline void udelay(unsigned long us)
-{
- delay(us * 200); /* approximate */
-}
-
-static gpio_t *blocks[]={ // GPIO1 .. 6
- OMAP34XX_GPIO1_BASE,
- OMAP34XX_GPIO2_BASE,
- OMAP34XX_GPIO3_BASE,
- OMAP34XX_GPIO4_BASE,
- OMAP34XX_GPIO5_BASE,
- OMAP34XX_GPIO6_BASE
-};
-
-static inline int gpio_get(int n)
-{
- int bit=n % 32;
- gpio_t *base=blocks[n/32];
- return (base->datain >> bit)&1;
-}
-
-static inline int gpio_is_input(int n)
-{ // geht nicht richtig
- int bit=n % 32;
- gpio_t *base=blocks[n/32];
- return (base->oe >> bit)&1;
-}
-
-#ifdef CFG_CMD_FAT
-extern void * memcpy(void * dest,const void *src,size_t count);
-#else
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-#endif
-
-/* -------------------------------------------------------------------- */
-
-#define XON_CHAR 17
-#define XOFF_CHAR 19
-#define START_CHAR 0x01
-#define ETX_CHAR 0x03
-#define END_CHAR 0x0D
-#define SPACE 0x20
-#define K_ESCAPE 0x23
-#define SEND_TYPE 'S'
-#define DATA_TYPE 'D'
-#define ACK_TYPE 'Y'
-#define NACK_TYPE 'N'
-#define BREAK_TYPE 'B'
-#define tochar(x) ((char) (((x) + SPACE) & 0xff))
-#define untochar(x) ((int) (((x) - SPACE) & 0xff))
-
-extern int os_data_count;
-extern int os_data_header[8];
-
-static void set_kerm_bin_mode(unsigned long *);
-static int k_recv(void);
-static ulong load_serial_bin (ulong offset);
-
-
-char his_eol; /* character he needs at end of packet */
-int his_pad_count; /* number of pad chars he needs */
-char his_pad_char; /* pad chars he needs */
-char his_quote; /* quote chars he'll use */
-
-int strcmp(char *s1, char *s2)
-{
- while(*s1 == *s2) {
- if(*s1 == 0)
- return 0; // same
- s1++;
- s2++;
- }
- return *s1 > *s2?1:-1;
-}
-
-long xtol(char *s)
-{
- long val=0;
- while(1)
- {
- if(*s >= '0' && *s <= '9')
- val=16*val+(*s++-'0');
- else if(*s >= 'A' && *s <= 'F')
- val=16*val+(*s++-'A'+10);
- else if(*s >= 'a' && *s <= 'f')
- val=16*val+(*s++-'a'+10);
- else
- break;
- }
- return val;
-}
-
-static char *addr=(char *) CFG_LOADADDR;
-static char line[100];
-static char *argv[10];
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-
-#define MUX_VAL(OFFSET,VALUE)\
-__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-
-#define CP(x) (CONTROL_PADCONF_##x)
-
-void testfn(void)
-{ // code can be copied to SDRAM (assuming that it is position-independent!)
- int i;
- for(i=0; i<10; i++) {
- if(i & 1)
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/
- else
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- }
-}
-
-int do_comand_line(void)
-{ // add testing code here
- printf ("Welcome to uart-loader\n");
- printf (" c - run test code in RAM\n");
- printf (" x [addr] - execute\n");
- printf (" l - loop hello world\n");
- printf (" ram - fill ram with data pattern\n");
- printf (" a addr - set address\n");
- printf (" r [size] - read bytes\n");
- printf (" rl [size] - read long words\n");
- printf (" f [value [size]] - write bytes\n");
- printf (" bl - blink backlight\n");
- printf (" g - show GPIOs\n");
- printf (" m - show PinMux\n");
- return 0;
- while(1) {
- char *c;
- int argc=0;
- int pos=0;
- printf ("$ ");
- while(1) {
- line[pos]=getc();
- switch(line[pos]) {
- case '\b':
- case 0x7f:
- if(pos > 0) {
- putc('\b');
- pos--;
- }
- continue;
- case 0:
- case '\n':
- continue; // ignore
- case '\r':
- break; // command
- default:
- if(pos < sizeof(line)/sizeof(line[0])) {
- putc(line[pos]); // echo
- pos++;
- }
- continue;
- }
- line[pos]=0;
- printf("\n");
- break;
- }
- c=line;
- while(argc < sizeof(argv)/sizeof(argv[0])) {
- while (*c == ' ' || *c == '\t')
- c++;
- if(*c == 0)
- break;
- argv[argc]=c;
- while(*c != 0 && *c != '\t' && *c != ' ')
- c++;
- argc++;
- if(*c == 0)
- break;
- *c=0; // substitute
- c++;
- }
- if(argc == 0)
- continue; // empty line
-// printf("argc=%d argv[0]=%s\n", argc, argv[0]);
- if(strcmp(argv[0], "c") == 0) { // c - copy test function to SDRAM and execute
- void (*fn)(void) = &testfn;
- size_t cnt = 0x1000;
- addr=(char *) CFG_LOADADDR;
- printf("%08x (%d) --> %08x\n", fn, cnt, addr);
- memcpy(addr, fn, cnt);
- (*fn)();
- }
- else if(strcmp(argv[0], "x") == 0) { // x [addr] - execute code
- void (*fn)(void) = addr;
- if(argc > 1)
- fn = (void *) xtol(argv[1]);
- (*fn)();
- }
- else if(strcmp(argv[0], "l") == 0) { // l - loop
- int d=1;
- while(1)
- printf ("Welcome to uart-loader (%d)\n", d++), udelay(500*1000);
- }
- else if(strcmp(argv[0], "ram") == 0) {
- int val=0x55;
- if(argc == 2)
- val=xtol(argv[1]);
- for(addr=(char *) CFG_LOADADDR; addr < 256+(char *) CFG_LOADADDR; addr++) {
- *addr=val++;
- }
- addr=(char *) CFG_LOADADDR;
- }
- else if(strcmp(argv[0], "a") == 0) { // a [addr]
- if(argc > 1)
- addr=(char *) xtol(argv[1]);
- printf("%08x\n", addr);
- }
- else if(strcmp(argv[0], "r") == 0) { // r [size]
- int i;
- int n=1;
- if(argc > 1)
- n=xtol(argv[1]);
- printf("%08x:", addr);
- for(i=0; i<n; i++) {
- printf(" %02x", *addr++);
- if(i % 16 == 15 && i != n-1)
- printf("\n%08x:", addr);
- }
- printf("\n");
- }
- else if(strcmp(argv[0], "rl") == 0) { // rl [size]
- int i;
- int n=1;
- if(argc > 1)
- n=xtol(argv[1]);
- printf("%08x:", addr);
- for(i=0; i<n; i++) {
- printf(" %08x", *(volatile unsigned int *) addr);
- addr+=4;
- if(i % 4 == 3 && i != n-1)
- printf("\n%08x:", addr);
- }
- printf("\n");
- }
- else if(strcmp(argv[0], "f") == 0) { // f [value [size]]
- int i;
- int n=1;
- int val=0x55;
- if(argc > 1)
- val=xtol(argv[1]);
- if(argc > 2)
- n=xtol(argv[2]);
- for(i=0; i<n; i++)
- addr[i]=val;
- }
-#if 0
- else if(strcmp(argv[0], "clk") == 0) { // clk
- extern u32 osc_clk;
- printf("clk=%d\n", osc_clk);
- }
-#endif
- else if(strcmp(argv[0], "bl") == 0) { // blink backlight
- int i;
- for(i=0; i<10; i++) {
- if(i & 1)
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/
- else
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- }
- }
- else if(strcmp(argv[0], "g") == 0) { // g - read GPIO
- unsigned int i; // gcc compilation has problems with signed division and modulo!
- int n=32*sizeof(blocks)/sizeof(blocks[0]);
- printf("GPIO1 data: %08x\n", ((gpio_t *) OMAP34XX_GPIO1_BASE) -> datain);
- printf("%03d:", 0);
- for(i=0; i<n; i++) {
- printf(" %c%d", (gpio_is_input(i)?' ':'o'), gpio_get(i));
- if(i % 10 == 9 && i != n-1)
- printf("\n%03d:", i);
- }
- printf("\n");
-
- }
- else if(strcmp(argv[0], "m") == 0) { // m - read pinmux
- int cols=0;
- addr=0x48002030;
- printf("%08x", addr);
- while(addr <= 0x480025F8) {
- unsigned mux=*(unsigned *) addr;
- int i;
- for(i=1; i <= 2; i++) {
- printf(" %c%d%c", (mux&8)?((mux&0x10?'U':'D')):' ', (mux&7), (mux&0x100)?'I':'O');
- mux >>= 16;
- }
- if(addr == 0x48002264) {
- addr=0x480025DC;
- printf("\n%08x", addr);
- cols=0;
- }
- else {
- addr+=4;
- if(++cols == 8)
- printf("\n%08x", addr), cols=0;
- }
- }
- printf("\n");
- }
- else
- printf("uart-loader unknown command: %s\n", argv[0]);
- }
- return 0;
-}
-
-int do_load_serial_bin (ulong offset, int baudrate)
-{
- ulong addr;
- int rcode = 0;
-
- printf ("## Ready for binary (kermit) download "
- "to 0x%08lX at %d bps...\n",
- offset,
- baudrate);
- addr = load_serial_bin (offset);
-
- udelay(3*1000*1000);
-
- if (addr == ~0) {
- printf ("## Binary (kermit) download aborted\n");
- rcode = 1;
- } else {
- printf ("## Start Addr = 0x%08lX\n", addr);
-#if 0
- udelay(3*1000*1000);
- {
- int i;
- int n=256;
- char *a=(char *) addr;
- printf("%08x:", a);
- for(i=0; i<n; i++) {
- printf(" %02x", *a++);
- if(i % 16 == 15 && i != n-1)
- printf("\n%08x:", a+1);
- }
- printf("\n");
- }
-#endif
- }
- return rcode;
-}
-
-
-static ulong load_serial_bin (ulong offset)
-{
- int size, i;
-
- set_kerm_bin_mode ((ulong *) offset);
- size = k_recv ();
-
- /*
- * Gather any trailing characters (for instance, the ^D which
- * is sent by 'cu' after sending a file), and give the
- * box some time (100 * 1 ms)
- */
- for (i=0; i<1000; ++i) {
- if (tstc()) {
- (void) getc();
- }
- udelay(1000);
- }
-
- udelay(5*1000*1000);
- printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
-
- return offset;
-}
-
-void send_pad (void)
-{
- int count = his_pad_count;
-
- while (count-- > 0)
- putc (his_pad_char);
-}
-
-/* converts escaped kermit char to binary char */
-char ktrans (char in)
-{
- if ((in & 0x60) == 0x40) {
- return (char) (in & ~0x40);
- } else if ((in & 0x7f) == 0x3f) {
- return (char) (in | 0x40);
- } else
- return in;
-}
-
-int chk1 (char *buffer)
-{
- int total = 0;
-
- while (*buffer) {
- total += *buffer++;
- }
- return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
-}
-
-void s1_sendpacket (char *packet)
-{
- send_pad ();
- while (*packet) {
- putc (*packet++);
- }
-}
-
-static char a_b[24];
-void send_ack (int n)
-{
- a_b[0] = START_CHAR;
- a_b[1] = tochar (3);
- a_b[2] = tochar (n);
- a_b[3] = ACK_TYPE;
- a_b[4] = '\0';
- a_b[4] = tochar (chk1 (&a_b[1]));
- a_b[5] = his_eol;
- a_b[6] = '\0';
- s1_sendpacket (a_b);
-}
-
-void send_nack (int n)
-{
- a_b[0] = START_CHAR;
- a_b[1] = tochar (3);
- a_b[2] = tochar (n);
- a_b[3] = NACK_TYPE;
- a_b[4] = '\0';
- a_b[4] = tochar (chk1 (&a_b[1]));
- a_b[5] = his_eol;
- a_b[6] = '\0';
- s1_sendpacket (a_b);
-}
-
-
-/* os_data_* takes an OS Open image and puts it into memory, and
- puts the boot header in an array named os_data_header
-
- if image is binary, no header is stored in os_data_header.
-*/
-void (*os_data_init) (void);
-void (*os_data_char) (char new_char);
-static int os_data_state, os_data_state_saved;
-int os_data_count;
-static int os_data_count_saved;
-static char *os_data_addr, *os_data_addr_saved;
-static char *bin_start_address;
-int os_data_header[8];
-static void bin_data_init (void)
-{
- os_data_state = 0;
- os_data_count = 0;
- os_data_addr = bin_start_address;
-}
-static void os_data_save (void)
-{
- os_data_state_saved = os_data_state;
- os_data_count_saved = os_data_count;
- os_data_addr_saved = os_data_addr;
-}
-static void os_data_restore (void)
-{
- os_data_state = os_data_state_saved;
- os_data_count = os_data_count_saved;
- os_data_addr = os_data_addr_saved;
-}
-static void bin_data_char (char new_char)
-{
- switch (os_data_state) {
- case 0: /* data */
- *os_data_addr++ = new_char;
- --os_data_count;
- break;
- }
-}
-static void set_kerm_bin_mode (unsigned long *addr)
-{
- bin_start_address = (char *) addr;
- os_data_init = bin_data_init;
- os_data_char = bin_data_char;
-}
-
-
-/* k_data_* simply handles the kermit escape translations */
-static int k_data_escape, k_data_escape_saved;
-void k_data_init (void)
-{
- k_data_escape = 0;
- os_data_init ();
-}
-void k_data_save (void)
-{
- k_data_escape_saved = k_data_escape;
- os_data_save ();
-}
-void k_data_restore (void)
-{
- k_data_escape = k_data_escape_saved;
- os_data_restore ();
-}
-void k_data_char (char new_char)
-{
- if (k_data_escape) {
- /* last char was escape - translate this character */
- os_data_char (ktrans (new_char));
- k_data_escape = 0;
- } else {
- if (new_char == his_quote) {
- /* this char is escape - remember */
- k_data_escape = 1;
- } else {
- /* otherwise send this char as-is */
- os_data_char (new_char);
- }
- }
-}
-
-#define SEND_DATA_SIZE 20
-char send_parms[SEND_DATA_SIZE];
-char *send_ptr;
-
-/* handle_send_packet interprits the protocol info and builds and
- sends an appropriate ack for what we can do */
-void handle_send_packet (int n)
-{
- int length = 3;
- int bytes;
-
- /* initialize some protocol parameters */
- his_eol = END_CHAR; /* default end of line character */
- his_pad_count = 0;
- his_pad_char = '\0';
- his_quote = K_ESCAPE;
-
- /* ignore last character if it filled the buffer */
- if (send_ptr == &send_parms[SEND_DATA_SIZE - 1])
- --send_ptr;
- bytes = send_ptr - send_parms; /* how many bytes we'll process */
- do {
- if (bytes-- <= 0)
- break;
- /* handle MAXL - max length */
- /* ignore what he says - most I'll take (here) is 94 */
- a_b[++length] = tochar (94);
- if (bytes-- <= 0)
- break;
- /* handle TIME - time you should wait for my packets */
- /* ignore what he says - don't wait for my ack longer than 1 second */
- a_b[++length] = tochar (1);
- if (bytes-- <= 0)
- break;
- /* handle NPAD - number of pad chars I need */
- /* remember what he says - I need none */
- his_pad_count = untochar (send_parms[2]);
- a_b[++length] = tochar (0);
- if (bytes-- <= 0)
- break;
- /* handle PADC - pad chars I need */
- /* remember what he says - I need none */
- his_pad_char = ktrans (send_parms[3]);
- a_b[++length] = 0x40; /* He should ignore this */
- if (bytes-- <= 0)
- break;
- /* handle EOL - end of line he needs */
- /* remember what he says - I need CR */
- his_eol = untochar (send_parms[4]);
- a_b[++length] = tochar (END_CHAR);
- if (bytes-- <= 0)
- break;
- /* handle QCTL - quote control char he'll use */
- /* remember what he says - I'll use '#' */
- his_quote = send_parms[5];
- a_b[++length] = '#';
- if (bytes-- <= 0)
- break;
- /* handle QBIN - 8-th bit prefixing */
- /* ignore what he says - I refuse */
- a_b[++length] = 'N';
- if (bytes-- <= 0)
- break;
- /* handle CHKT - the clock check type */
- /* ignore what he says - I do type 1 (for now) */
- a_b[++length] = '1';
- if (bytes-- <= 0)
- break;
- /* handle REPT - the repeat prefix */
- /* ignore what he says - I refuse (for now) */
- a_b[++length] = 'N';
- if (bytes-- <= 0)
- break;
- /* handle CAPAS - the capabilities mask */
- /* ignore what he says - I only do long packets - I don't do windows */
- a_b[++length] = tochar (2); /* only long packets */
- a_b[++length] = tochar (0); /* no windows */
- a_b[++length] = tochar (94); /* large packet msb */
- a_b[++length] = tochar (94); /* large packet lsb */
- } while (0);
-
- a_b[0] = START_CHAR;
- a_b[1] = tochar (length);
- a_b[2] = tochar (n);
- a_b[3] = ACK_TYPE;
- a_b[++length] = '\0';
- a_b[length] = tochar (chk1 (&a_b[1]));
- a_b[++length] = his_eol;
- a_b[++length] = '\0';
- s1_sendpacket (a_b);
-}
-
-/* k_recv receives a OS Open image file over kermit line */
-static int k_recv (void)
-{
- char new_char;
- char k_state, k_state_saved;
- int sum;
- int done;
- int length;
- int n, last_n;
- int z = 0;
- int len_lo, len_hi;
-
- /* initialize some protocol parameters */
- his_eol = END_CHAR; /* default end of line character */
- his_pad_count = 0;
- his_pad_char = '\0';
- his_quote = K_ESCAPE;
-
- /* initialize the k_recv and k_data state machine */
- done = 0;
- k_state = 0;
- k_data_init ();
- k_state_saved = k_state;
- k_data_save ();
- n = 0; /* just to get rid of a warning */
- last_n = -1;
-
- /* expect this "type" sequence (but don't check):
- S: send initiate
- F: file header
- D: data (multiple)
- Z: end of file
- B: break transmission
- */
-
- /* enter main loop */
- while (!done) {
- /* set the send packet pointer to begining of send packet parms */
- send_ptr = send_parms;
-
- /* With each packet, start summing the bytes starting with the length.
- Save the current sequence number.
- Note the type of the packet.
- If a character less than SPACE (0x20) is received - error.
- */
-
-#if 0
- /* OLD CODE, Prior to checking sequence numbers */
- /* first have all state machines save current states */
- k_state_saved = k_state;
- k_data_save ();
-#endif
-
- /* get a packet */
- /* wait for the starting character or ^C */
- for (;;) {
- switch (getc ()) {
- case START_CHAR: /* start packet */
- goto START;
- case ETX_CHAR: /* ^C waiting for packet */
- return (0);
- default:
- ;
- }
- }
-START:
- /* get length of packet */
- sum = 0;
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- length = untochar (new_char);
- /* get sequence number */
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- n = untochar (new_char);
- --length;
-
- /* NEW CODE - check sequence numbers for retried packets */
- /* Note - this new code assumes that the sequence number is correctly
- * received. Handling an invalid sequence number adds another layer
- * of complexity that may not be needed - yet! At this time, I'm hoping
- * that I don't need to buffer the incoming data packets and can write
- * the data into memory in real time.
- */
- if (n == last_n) {
- /* same sequence number, restore the previous state */
- k_state = k_state_saved;
- k_data_restore ();
- } else {
- /* new sequence number, checkpoint the download */
- last_n = n;
- k_state_saved = k_state;
- k_data_save ();
- }
- /* END NEW CODE */
-
- /* get packet type */
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- k_state = new_char;
- --length;
- /* check for extended length */
- if (length == -2) {
- /* (length byte was 0, decremented twice) */
- /* get the two length bytes */
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- len_hi = untochar (new_char);
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- len_lo = untochar (new_char);
- length = len_hi * 95 + len_lo;
- /* check header checksum */
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
- goto packet_error;
- sum += new_char & 0xff;
-/* --length; */ /* new length includes only data and block check to come */
- }
- /* bring in rest of packet */
- while (length > 1) {
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- sum += new_char & 0xff;
- --length;
- if (k_state == DATA_TYPE) {
- /* pass on the data if this is a data packet */
- k_data_char (new_char);
- } else if (k_state == SEND_TYPE) {
- /* save send pack in buffer as is */
- *send_ptr++ = new_char;
- /* if too much data, back off the pointer */
- if (send_ptr >= &send_parms[SEND_DATA_SIZE])
- --send_ptr;
- }
- }
- /* get and validate checksum character */
- new_char = getc ();
- if ((new_char & 0xE0) == 0)
- goto packet_error;
- if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
- goto packet_error;
- /* get END_CHAR */
- new_char = getc ();
- if (new_char != END_CHAR) {
- packet_error:
- /* restore state machines */
- k_state = k_state_saved;
- k_data_restore ();
- /* send a negative acknowledge packet in */
- send_nack (n);
- } else if (k_state == SEND_TYPE) {
- /* crack the protocol parms, build an appropriate ack packet */
- handle_send_packet (n);
- } else {
- /* send simple acknowledge packet in */
- send_ack (n);
- /* quit if end of transmission */
- if (k_state == BREAK_TYPE)
- done = 1;
- }
- ++z;
- }
- return ((ulong) os_data_addr - (ulong) bin_start_address);
-}
diff --git a/uart-loader/config.mk b/uart-loader/config.mk
deleted file mode 100644
index 1365b9d..0000000
--- a/uart-loader/config.mk
+++ /dev/null
@@ -1,175 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-# clean the slate ...
-PLATFORM_RELFLAGS =
-PLATFORM_CPPFLAGS =
-PLATFORM_LDFLAGS =
-
-#
-# When cross-compiling on NetBSD, we have to define __PPC__ or else we
-# will pick up a va_list declaration that is incompatible with the
-# actual argument lists emitted by the compiler.
-#
-# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
-
-ifeq ($(ARCH),ppc)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-endif
-
-ifdef ARCH
-sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules
-endif
-ifdef CPU
-sinclude $(TOPDIR)/cpu/$(CPU)/config.mk # include CPU specific rules
-endif
-ifdef VENDOR
-BOARDDIR = $(VENDOR)/$(BOARD)
-else
-BOARDDIR = $(BOARD)
-endif
-ifdef BOARD
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.mk # include board specific rules
-endif
-
-#########################################################################
-
-CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
- else if [ -x /bin/bash ]; then echo /bin/bash; \
- else echo sh; fi ; fi)
-
-ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
-HOSTCC = cc
-else
-HOSTCC = gcc
-endif
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTSTRIP = strip
-
-#########################################################################
-#
-# Option checker (courtesy linux kernel) to ensure
-# only supported compiler options are used
-#
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-#
-# Include the make variables (CC, etc...)
-#
-AS = $(CROSS_COMPILE)as
-LD = $(CROSS_COMPILE)ld
-CC = $(CROSS_COMPILE)gcc
-CPP = $(CC) -E
-AR = $(CROSS_COMPILE)ar
-NM = $(CROSS_COMPILE)nm
-STRIP = $(CROSS_COMPILE)strip
-OBJCOPY = $(CROSS_COMPILE)objcopy
-OBJDUMP = $(CROSS_COMPILE)objdump
-RANLIB = $(CROSS_COMPILE)RANLIB
-
-RELFLAGS= $(PLATFORM_RELFLAGS)
-DBGFLAGS= -g # -DDEBUG
-OPTFLAGS= -Os #-fomit-frame-pointer
-ifndef LDSCRIPT
-#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds.debug
-LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds
-endif
-OBJCFLAGS += --gap-fill=0xff
-
-gccincdir := $(shell $(CC) -print-file-name=include)
-
-CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
- -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
-
-ifdef BUILD_TAG
-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
- -DBUILD_TAG='"$(BUILD_TAG)"'
-else
-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes
-endif
-
-AFLAGS_DEBUG := -Wa,-gstabs
-AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
-
-LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
-
-# Location of a usable BFD library, where we define "usable" as
-# "built for ${HOST}, supports ${TARGET}". Sensible values are
-# - When cross-compiling: the root of the cross-environment
-# - Linux/ppc (native): /usr
-# - NetBSD/ppc (native): you lose ... (must extract these from the
-# binutils build directory, plus the native and U-Boot include
-# files don't like each other)
-#
-# So far, this is used only by tools/gdb/Makefile.
-
-ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
-BFD_ROOT_DIR = /usr/local/tools
-else
-ifeq ($(HOSTARCH),$(ARCH))
-# native
-BFD_ROOT_DIR = /usr
-else
-#BFD_ROOT_DIR = /LinuxPPC/CDK # Linux/i386
-#BFD_ROOT_DIR = /usr/pkg/cross # NetBSD/i386
-BFD_ROOT_DIR = /opt/powerpc
-endif
-endif
-
-#########################################################################
-
-export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
- AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \
- MAKE
-export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
-
-#########################################################################
-
-%.s: %.S
- $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$<
-%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$<
-%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-#########################################################################
diff --git a/uart-loader/cpu/omap3/Makefile b/uart-loader/cpu/omap3/Makefile
deleted file mode 100644
index fca0dad..0000000
--- a/uart-loader/cpu/omap3/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(CPU).a
-
-START = start.o
-OBJS = cpu.o mmc.o sys_info.o
-
-all: .depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/cpu/omap3/config.mk b/uart-loader/cpu/omap3/config.mk
deleted file mode 100644
index 71547f3..0000000
--- a/uart-loader/cpu/omap3/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8
-
-# PLATFORM_CPPFLAGS += -march=armv7-a
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
-PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/uart-loader/cpu/omap3/cpu.c b/uart-loader/cpu/omap3/cpu.c
deleted file mode 100644
index 1cf422a..0000000
--- a/uart-loader/cpu/omap3/cpu.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * (C) Copyright 2004-2006 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-#include <common.h>
-
-/* See also ARM Ref. Man. */
-#define C1_MMU (1<<0) /* mmu off/on */
-#define C1_ALIGN (1<<1) /* alignment faults off/on */
-#define C1_DC (1<<2) /* dcache off/on */
-#define C1_WB (1<<3) /* merging write buffer on/off */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
-#define C1_SYS_PROT (1<<8) /* system protection */
-#define C1_ROM_PROT (1<<9) /* ROM protection */
-#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
-
-int cpu_init (void)
-{
- return 0;
-}
-
diff --git a/uart-loader/cpu/omap3/mmc.c b/uart-loader/cpu/omap3/mmc.c
deleted file mode 120000
index ca45f14..0000000
--- a/uart-loader/cpu/omap3/mmc.c
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc.c \ No newline at end of file
diff --git a/uart-loader/cpu/omap3/mmc_host_def.h b/uart-loader/cpu/omap3/mmc_host_def.h
deleted file mode 120000
index d40a0a1..0000000
--- a/uart-loader/cpu/omap3/mmc_host_def.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc_host_def.h \ No newline at end of file
diff --git a/uart-loader/cpu/omap3/mmc_protocol.h b/uart-loader/cpu/omap3/mmc_protocol.h
deleted file mode 120000
index f79c007..0000000
--- a/uart-loader/cpu/omap3/mmc_protocol.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc_protocol.h \ No newline at end of file
diff --git a/uart-loader/cpu/omap3/start.S b/uart-loader/cpu/omap3/start.S
deleted file mode 100644
index 142c425..0000000
--- a/uart-loader/cpu/omap3/start.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * armboot - Startup Code for OMP2420/ARM1136 CPU-core
- *
- * Copyright (c) 2004-2006 Texas Instruments
- *
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
- * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
- * Copyright (c) 2003 Kshitij <kshitij@ti.com>
- * Copyright (c) 2004 Jian Zhang <jzhang@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/cpu.h>
-
-.globl _start
-_start:
- b reset
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
-
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
- .word TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
- .word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
- .word __bss_start
-
-.globl _bss_end
-_bss_end:
- .word _end
-
-/*
- * the actual reset code
- */
-
-reset:
- ldr r4, scratchpad /* r4 <- scratchpad reg address */
- ldr r5, [r0, #0x4] /* r5 <- value of boot device */
- str r5, [r4] /* store r5 in scratchpad reg */
-
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
- /* Copy vectors to mask ROM indirect addr */
- adr r0, _start /* r0 <- current position of code */
- add r0, r0, #4 /* skip reset vector */
- mov r2, #64 /* r2 <- size to copy */
- add r2, r0, r2 /* r2 <- source end address */
- mov r1, #SRAM_OFFSET0 /* build vect addr */
- mov r3, #SRAM_OFFSET1
- add r1, r1, r3
- mov r3, #SRAM_OFFSET2
- add r1, r1, r3
-next:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next /* loop until equal */
-
- bl cpy_clk_code /* put dpll adjust code behind vectors */
-
- /* the mask ROM code should have PLL and others stable */
- bl cpu_init_crit
-
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* no need to relocate if XIP */
- beq stack_setup /* skip txt cpy if XIP(SRAM, SDRAM) */
-
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-
- /* Set up the stack */
-stack_setup:
- ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub sp, r0, #128 /* leave 32 words for abort-stack */
- and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */
-
- /* Clear BSS (if any). Is below tx (watch load addr - need space) */
-clear_bss:
- ldr r0, _bss_start /* find start of bss segment */
- ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear value */
-clbss_l:
- str r2, [r0] /* clear BSS location */
- cmp r0, r1 /* are we at the end yet */
- add r0, r0, #4 /* increment clear index pointer */
- bne clbss_l /* keep clearing till at end */
-
- ldr pc, _start_armboot /* jump to C code */
-
-_start_armboot: .word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-cpu_init_crit:
- /*
- * Invalidate L1 I/D
- */
- mov r0, #0 /* set up for MCR */
- mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr p15, 0, r0, c7, c5, 1 /* invalidate icache */
-
- /* Invalide L2 cache (gp device call point)
- * - warning, this may have issues on EMU/HS devices
- * this call can corrupt r0-r5
- */
- mov r12, #0x1 @ set up to invalide L2
-smi: .word 0xE1600070 @ Call SMI monitor
-
- /*
- * disable MMU stuff and caches
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002000 @ clear bits 13 (--V-)
- bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM)
- orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align
-#ifndef CONFIG_ICACHE_OFF
- orr r0, r0, #0x00001800 @ set bit 11,12 (---I Z---) BTB,I-Cache
-#endif
- mcr p15, 0, r0, c1, c0, 0
-
- /*
- * Jump to board specific initialization... The Mask ROM will have already initialized
- * basic memory. Go here to bump up clock rate and handle wake up conditions.
- */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* pass on info about skipping some init portions */
- moveq r0,#0x1 /* flag to skip prcm and sdrc setup */
- movne r0,#0x0
-
- mov ip, lr /* persevere link reg across call */
- bl lowlevel_init /* go setup pll,mux,memory */
- mov lr, ip /* restore link */
- mov pc, lr /* back to my caller */
-
-/*
- * exception handler
- */
- .align 5
-do_hang:
- ldr sp, _TEXT_BASE /* use 32 words abort stack */
- bl hang /* hang and never return */
-
-scratchpad:
- .word 0x480029c0
diff --git a/uart-loader/cpu/omap3/sys_info.c b/uart-loader/cpu/omap3/sys_info.c
deleted file mode 100644
index 9a14d0e..0000000
--- a/uart-loader/cpu/omap3/sys_info.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Derived from board specific omap code by
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/rev.h>
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-/*
- * get_cpu_rev(void) - extract version info
- */
-u32 get_cpu_rev(void)
-{
- u32 cpuid = 0;
- ctrl_id_t *id_base;
- /*
- * On ES1.0 the IDCODE register is not exposed on L4
- * so using CPU ID to differentiate between ES1.0 and > ES1.0.
- */
- __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid));
- if ((cpuid & 0xf) == 0x0)
- return CPU_3XX_ES10;
- else {
- /* Decode the IDs on > ES1.0 */
- id_base = (ctrl_id_t *) OMAP34XX_ID_L4_IO_BASE;
-
- cpuid = (__raw_readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
-
- /* Some early ES2.0 seem to report ID 0, fix this */
- if (cpuid == 0)
- cpuid = CPU_3XX_ES20;
-
- return cpuid;
- }
-}
-
-/*
- * cpu_is_3410(void) - returns true for 3410
- */
-u32 cpu_is_3410(void)
-{
- int status;
- if(get_cpu_rev() < CPU_3XX_ES20) {
- return 0;
- } else {
- /* read scalability status and return 1 for 3410*/
- status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS);
- /* Check whether MPU frequency is set to 266 MHz which
- * is nominal for 3410. If yes return true else false
- */
- if (((status >> 8) & 0x3) == 0x2)
- return 1;
- else
- return 0;
- }
-}
-
diff --git a/uart-loader/disk/Makefile b/uart-loader/disk/Makefile
deleted file mode 100644
index 7da4624..0000000
--- a/uart-loader/disk/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-#CFLAGS += -DET_DEBUG -DDEBUG
-
-LIB = libdisk.a
-
-OBJS = part.o
-
-all: $(LIB)
-
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/disk/part.c b/uart-loader/disk/part.c
deleted file mode 100644
index a367f13..0000000
--- a/uart-loader/disk/part.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <ide.h>
-#include <part.h>
-
-#undef PART_DEBUG
-
-#ifdef PART_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
- (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
-/* ------------------------------------------------------------------------- */
-/*
- * reports device info to the user
- */
-void dev_print (block_dev_desc_t *dev_desc)
-{
-#ifdef CONFIG_LBA48
- uint64_t lba512; /* number of blocks if 512bytes block size */
-#else
- lbaint_t lba512;
-#endif
-
- if (dev_desc->type==DEV_TYPE_UNKNOWN) {
- return;
- }
- if (dev_desc->if_type==IF_TYPE_SCSI) {
- printf ("(%d:%d) ", dev_desc->target,dev_desc->lun);
- }
- if (dev_desc->if_type==IF_TYPE_IDE) {
- printf ("Model: %s Firm: %s Ser#: %s\n",
- dev_desc->vendor,
- dev_desc->revision,
- dev_desc->product);
- } else {
- printf ("Vendor: %s Prod.: %s Rev: %s\n",
- dev_desc->vendor,
- dev_desc->product,
- dev_desc->revision);
- }
- printf (" Type: ");
- switch (dev_desc->type & 0x1F) {
- case DEV_TYPE_HARDDISK: printf ("Hard Disk");
- break;
- case DEV_TYPE_CDROM: printf ("CD ROM");
- break;
- case DEV_TYPE_OPDISK: printf ("Optical Device");
- break;
- case DEV_TYPE_TAPE: printf ("Tape");
- break;
- default: printf ("# %02X #", dev_desc->type & 0x1F);
- break;
- }
- if ((dev_desc->lba * dev_desc->blksz)>0L) {
- ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
- lbaint_t lba;
-
- lba = dev_desc->lba;
-
- lba512 = (lba * (dev_desc->blksz/512));
- mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */
- /* round to 1 digit */
- mb_quot = mb / 10;
- mb_rem = mb - (10 * mb_quot);
-
- gb = mb / 1024;
- gb_quot = gb / 10;
- gb_rem = gb - (10 * gb_quot);
-#ifdef CONFIG_LBA48
- if (dev_desc->lba48)
- printf (" Supports 48-bit addressing\n");
-#endif
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n",
- mb_quot, mb_rem,
- gb_quot, gb_rem,
- lba,
- dev_desc->blksz);
-#else
- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
- mb_quot, mb_rem,
- gb_quot, gb_rem,
- (ulong)lba,
- dev_desc->blksz);
-#endif
- } else {
- printf (" Capacity: not available\n");
- }
-}
-#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */
-
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
- (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || \
- (CONFIG_COMMANDS & CFG_CMD_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
-#if defined(CONFIG_MAC_PARTITION) || \
- defined(CONFIG_DOS_PARTITION) || \
- defined(CONFIG_ISO_PARTITION) || \
- defined(CONFIG_AMIGA_PARTITION)
-
-void init_part (block_dev_desc_t * dev_desc)
-{
-#ifdef CONFIG_ISO_PARTITION
- if (test_part_iso(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_ISO;
- return;
- }
-#endif
-
-#ifdef CONFIG_MAC_PARTITION
- if (test_part_mac(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_MAC;
- return;
- }
-#endif
-
-#ifdef CONFIG_DOS_PARTITION
- if (test_part_dos(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_DOS;
- return;
- }
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- if (test_part_amiga(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_AMIGA;
- return;
- }
-#endif
-}
-
-
-int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
-{
- switch (dev_desc->part_type) {
-#ifdef CONFIG_MAC_PARTITION
- case PART_TYPE_MAC:
- if (get_partition_info_mac(dev_desc,part,info) == 0) {
- PRINTF ("## Valid MAC partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_DOS_PARTITION
- case PART_TYPE_DOS:
- if (get_partition_info_dos(dev_desc,part,info) == 0) {
- PRINTF ("## Valid DOS partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_ISO_PARTITION
- case PART_TYPE_ISO:
- if (get_partition_info_iso(dev_desc,part,info) == 0) {
- PRINTF ("## Valid ISO boot partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- case PART_TYPE_AMIGA:
- if (get_partition_info_amiga(dev_desc, part, info) == 0)
- {
- PRINTF ("## Valid Amiga partition found ##\n");
- return (0);
- }
- break;
-#endif
- default:
- break;
- }
- return (-1);
-}
-
-static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
-{
- switch (dev_desc->if_type) {
- case IF_TYPE_IDE: printf ("IDE");
- break;
- case IF_TYPE_SCSI: printf ("SCSI");
- break;
- case IF_TYPE_ATAPI: printf ("ATAPI");
- break;
- case IF_TYPE_USB: printf ("USB");
- break;
- case IF_TYPE_DOC: printf ("DOC");
- break;
- default: printf ("UNKNOWN");
- break;
- }
- printf (" device %d -- Partition Type: %s\n\n",
- dev_desc->dev, type);
-}
-
-void print_part (block_dev_desc_t * dev_desc)
-{
-
- switch (dev_desc->part_type) {
-#ifdef CONFIG_MAC_PARTITION
- case PART_TYPE_MAC:
- PRINTF ("## Testing for valid MAC partition ##\n");
- print_part_header ("MAC", dev_desc);
- print_part_mac (dev_desc);
- return;
-#endif
-#ifdef CONFIG_DOS_PARTITION
- case PART_TYPE_DOS:
- PRINTF ("## Testing for valid DOS partition ##\n");
- print_part_header ("DOS", dev_desc);
- print_part_dos (dev_desc);
- return;
-#endif
-
-#ifdef CONFIG_ISO_PARTITION
- case PART_TYPE_ISO:
- PRINTF ("## Testing for valid ISO Boot partition ##\n");
- print_part_header ("ISO", dev_desc);
- print_part_iso (dev_desc);
- return;
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- case PART_TYPE_AMIGA:
- PRINTF ("## Testing for a valid Amiga partition ##\n");
- print_part_header ("AMIGA", dev_desc);
- print_part_amiga (dev_desc);
- return;
-#endif
- }
-}
-
-
-#else /* neither MAC nor DOS nor ISO partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured!
-#endif
-
-#endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */
diff --git a/uart-loader/drivers/Makefile b/uart-loader/drivers/Makefile
deleted file mode 100644
index ffc38b3..0000000
--- a/uart-loader/drivers/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG -DDEBUG
-
-LIB = libdrivers.a
-OBJS = serial.o ns16550.o onenand.o
-
-ifeq ($(BOARD), omap3430sdp)
-OBJS += k9f1g08r0a.o
-endif
-
-ifeq ($(BOARD), omap3430labrador)
-OBJS += k9f1g08r0a.o
-endif
-
-ifeq ($(BOARD), omap2420h4)
-OBJS += k9k1216.o
-endif
-
-ifeq ($(BOARD), omap2430sdp)
-OBJS += k9k1216.o
-endif
-
-ifeq ($(BOARD), omap1710h3)
-OBJS += k9f5616.o
-endif
-
-
-## Disabled for now:
-## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
-## lan91c96.o mw_eeprom.o natsemi.o \
-## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
-##
-
-all: $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/drivers/k9f1g08r0a.c b/uart-loader/drivers/k9f1g08r0a.c
deleted file mode 100644
index f0d6452..0000000
--- a/uart-loader/drivers/k9f1g08r0a.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9F1G08R0AQ0C NAND chip driver for an OMAP2420 board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-#ifdef CFG_NAND_K9F1G08R0A
-
-#define K9F1G08R0A_MFR 0xec /* Samsung */
-#define K9F1G08R0A_ID 0xa1 /* part # */
-
-/* Since Micron and Samsung parts are similar in geometry and bus width
- * we can use the same driver. Need to revisit to make this file independent
- * of part/manufacturer
- */
-#define MT29F1G_MFR 0x2c /* Micron */
-#define MT29F1G_ID 0xa1 /* x8, 1GiB */
-#define MT29F2G_ID 0xba /* x16, 2GiB */
-#define MT29F4G_ID 0xbc /* x16, 4GiB */
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE (ADDR_COLUMN | ADDR_PAGE)
-
-#define ADDR_OOB (0x4 | ADDR_COLUMN_PAGE)
-
-#define PAGE_SIZE 2048
-#define OOB_SIZE 64
-#define MAX_NUM_PAGES 64
-
-#ifdef NAND_HW_ROMCODE_ECC_LAYOUT
-#define __raw_ecc_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_ecc_writel(v, a) (*(volatile unsigned int *)(a) = (v))
-/* Register definitions */
-#define GPMC_BASE_ADDR OMAP34XX_GPMC_BASE
-
-#define ECCCLEAR (0x1 << 8)
-#define ECCRESULTREG1 (0x1 << 0)
-#define ECCSIZE512BYTE 0xFF
-#define ECCSIZE1 (ECCSIZE512BYTE << 22)
-#define ECCSIZE0 (ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL (0x000 << 0)
-
-#define ECC_BLOCK_SIZE 512
-#ifdef NAND_16BIT
-#define DEV_WIDTH 1
-static u_char ecc_pos[] = { 2, 3, 4, 5, 6, 7, 8, 9,
- 10, 11, 12, 13
-};
-#else
-#define DEV_WIDTH 0
-static u_char ecc_pos[] = { 1, 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12
-};
-#endif
-
-#else
-#ifdef NAND_16BIT
-#define DEV_WIDTH 1
-#else
-#define DEV_WIDTH 0
-#endif
-
-#ifdef CFG_SW_ECC_512
-#define ECC_BLOCK_SIZE 512
-#else
-#define ECC_BLOCK_SIZE 256
-#endif
-/* JFFS2 large page layout for 3-byte ECC per 256 bytes ECC layout */
-/* This is the only SW ECC supported by u-boot. So to load u-boot
- * this should be supported */
-static u_char ecc_pos[] = {40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63};
-
-#endif
-
-#define ECC_SIZE (sizeof(ecc_pos))
-#define ECC_STEPS 3
-#define ECC_CHECK_ENABLE
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %0, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char *buf, ulong page_addr);
-
-static unsigned long chipsize = (256 << 20);
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
-
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if (command == NAND_CMD_RESET) {
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do {
- ret_val = READ_NAND(NAND_ADDR); /* wait till ready */
- } while ((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(unsigned int numbytes, unsigned long ofs)
-{
- uchar u;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE
- || numbytes == ADDR_OOB)
- {
- ushort col = ofs;
-
- u = col & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
-
- u = (col >> 8) & 0x07;
- if (numbytes == ADDR_OOB)
- u = u | ((DEV_WIDTH == 1) ? (1 << 2) : (1 << 3));
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- }
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE
- || numbytes == ADDR_OOB)
- {
- u = (ofs >> 11) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- u = (ofs >> 19) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
-
- /* One more address cycle for devices > 128MiB */
- if (chipsize > (128 << 20)) {
- u = (ofs >> 27) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- }
- }
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- /* Check Micron part or Samsung part */
- if ((mfr == MT29F1G_MFR && (id == MT29F1G_ID ||
- id == MT29F2G_ID || id == MT29F4G_ID)) ||
- (mfr == K9F1G08R0A_MFR && (id == K9F1G08R0A_ID)))
- return 0;
-
- return 1;
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
-
-#ifdef ECC_CHECK_ENABLE
- u8 oob_buf[OOB_SIZE];
-
- /* check bad block */
- /* 0th word in spare area needs be 0xff */
- if (nand_read_oob(oob_buf, block_addr) || (oob_buf[0] & 0xff) != 0xff) {
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-#endif
- /* read the block page by page*/
- for (i = 0; i < MAX_NUM_PAGES; i++) {
- if (nand_read_page(buf + offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-
-#ifdef NAND_HW_ROMCODE_ECC_LAYOUT
-/*
- * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in
- * GPMC controller
- *
- */
-static void omap_hwecc_init(void)
-{
- /*
- * Init ECC Control Register
- * Clear all ECC | Enable Reg1
- */
- __raw_ecc_writel(ECCCLEAR | ECCRESULTREG1,
- GPMC_BASE_ADDR + GPMC_ECC_CONTROL);
- __raw_ecc_writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL,
- GPMC_BASE_ADDR + GPMC_ECC_SIZE_CONFIG);
- __raw_ecc_writel(0x1 | (0 << 1) | (DEV_WIDTH << 7),
- GPMC_BASE_ADDR + GPMC_ECC_CONFIG);
-}
-
-/*
- * gen_true_ecc - This function will generate true ECC value, which
- * can be used when correcting data read from NAND flash memory core
- *
- * @ecc_buf: buffer to store ecc code
- *
- * @return: re-formatted ECC value
- */
-static uint32_t gen_true_ecc(uint8_t *ecc_buf)
-{
- return ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xF0) << 20) |
- ((ecc_buf[2] & 0x0F) << 8);
-}
-
-/*
- * omap_calculate_ecc - Generate non-inverted ECC bytes.
- *
- * Using noninverted ECC can be considered ugly since writing a blank
- * page ie. padding will clear the ECC bytes. This is no problem as
- * long nobody is trying to write data on the seemingly unused page.
- * Reading an erased page will produce an ECC mismatch between
- * generated and read ECC bytes that has to be dealt with separately.
- * E.g. if page is 0xFF (fresh erased), and if HW ECC engine within GPMC
- * is used, the result of read will be 0x0 while the ECC offsets of the
- * spare area will be 0xFF which will result in an ECC mismatch.
- * @dat: unused
- * @ecc_code: ecc_code buffer
- */
-static int omap_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code)
-{
- u_int32_t val;
-
- /* Start Reading from HW ECC1_Result = 0x200 */
- val = __raw_ecc_readl(GPMC_BASE_ADDR + GPMC_ECC1_RESULT);
-
- ecc_code[0] = val & 0xFF;
- ecc_code[1] = (val >> 16) & 0xFF;
- ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0);
-
- /*
- * Stop reading anymore ECC vals and clear old results
- * enable will be called if more reads are required
- */
- __raw_ecc_writel(0x000, GPMC_BASE_ADDR + GPMC_ECC_CONFIG);
-
- return 0;
-}
-
-static int hweight32(unsigned int val)
-{
- u_char count = 0;
- for ( ; val; count++)
- val &= (val - 1);
- return count;
-}
-
-/*
- * omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
- * Further details can be had from OMAP TRM and the following selected links:
- * http://en.wikipedia.org/wiki/Hamming_code
- * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
- *
- * @dat: page data
- * @read_ecc: ecc read from nand flash
- * @calc_ecc: ecc read from ECC registers
- *
- * @return 0 if data is OK or corrected, else returns -1
- */
-static int omap_correct_data(uint8_t *dat,
- uint8_t *read_ecc, uint8_t *calc_ecc)
-{
- uint32_t orig_ecc, new_ecc, res, hm;
- uint16_t parity_bits, byte;
- uint8_t bit;
-
- /* Regenerate the orginal ECC */
- orig_ecc = gen_true_ecc(read_ecc);
- new_ecc = gen_true_ecc(calc_ecc);
- /* Get the XOR of real ecc */
- res = orig_ecc ^ new_ecc;
- if (res) {
- /* Get the hamming width */
- hm = hweight32(res);
- /* Single bit errors can be corrected! */
- if (hm == 12) {
- /* Correctable data! */
- parity_bits = res >> 16;
- bit = (parity_bits & 0x7);
- byte = (parity_bits >> 3) & 0x1FF;
- /* Flip the bit to correct */
- dat[byte] ^= (0x1 << bit);
- } else if (hm == 1) {
- printf("Error: Ecc is wrong\n");
- /* ECC itself is corrupted */
- return 2;
- } else {
- /*
- * hm distance != parity pairs OR one, could mean 2 bit
- * error OR potentially be on a blank page..
- * orig_ecc: contains spare area data from nand flash.
- * new_ecc: generated ecc while reading data area.
- * Note: if the ecc = 0, all data bits from which it was
- * generated are 0xFF.
- * The 3 byte(24 bits) ecc is generated per 512byte
- * chunk of a page. If orig_ecc(from spare area)
- * is 0xFF && new_ecc(computed now from data area)=0x0,
- * this means that data area is 0xFF and spare area is
- * 0xFF. A sure sign of a erased page!
- */
- if ((orig_ecc == 0x0FFF0FFF) && (new_ecc == 0x00000000))
- return 0;
- printf("Error: Bad compare! failed\n");
- /* detected 2 bit error */
- return -1;
- }
- }
- return 0;
-}
-
-#define NAND_ECC_INIT() omap_hwecc_init()
-#define NAND_ECC_CALC(data_buf, ecc_buf) omap_calculate_ecc(data_buf, ecc_buf)
-#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\
- omap_correct_data(data_buf, ecc_gen, ecc_old)
-#else
-/* Software ECC APIs */
-#define NAND_ECC_INIT()
-#define NAND_ECC_CALC(data_buf, ecc_buf) nand_calculate_ecc(data_buf, ecc_buf)
-#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\
- nand_correct_data(data_buf, ecc_gen, ecc_old)
-#endif /* NAND_HW_ROMCODE_ECC_LAYOUT */
-
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
-#ifdef ECC_CHECK_ENABLE
- u_char ecc_code[ECC_SIZE];
- u_char ecc_calc[ECC_SIZE];
- u_char oob_buf[OOB_SIZE];
-#endif
- u16 val;
- int cntr;
- int len;
- int count;
-
-#ifdef NAND_16BIT
- u16 *p = (u16 *) buf;
-#else
- u_char *p = (u_char *) buf;
-#endif
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NanD_Command(NAND_CMD_READSTART);
- NAND_WAIT_READY();
-
- /* A delay seems to be helping here. needs more investigation */
- delay(10000);
- len = (DEV_WIDTH == 1) ? ECC_BLOCK_SIZE >> 1 : ECC_BLOCK_SIZE;
-
- /* Read in chunks of data. */
- for (count = 0; count < ECC_SIZE; count += ECC_STEPS) {
- NAND_ECC_INIT();
- for (cntr = 0; cntr < len; cntr++) {
- *p++ = READ_NAND(NAND_ADDR);
- delay(10);
- }
- NAND_ECC_CALC((p - ECC_BLOCK_SIZE), &ecc_calc[count]);
- }
-
-#ifdef ECC_CHECK_ENABLE
-#ifdef NAND_16BIT
- p = (u16 *) oob_buf;
-#else
- p = (u_char *) oob_buf;
-#endif
- len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE;
- for (cntr = 0; cntr < len; cntr++) {
- *p++ = READ_NAND(NAND_ADDR);
- delay(10);
- }
- count = 0;
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < ECC_SIZE; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
- for (count = 0, cntr = 0; cntr < PAGE_SIZE / ECC_BLOCK_SIZE;
- cntr++, count += ECC_STEPS) {
- if (NAND_ECC_CORRECT(buf, &ecc_code[count], &ecc_calc[count])
- == -1) {
- printf("ECC Failed, page 0x%08x\n", page_addr);
- for (val = 0; val < ECC_BLOCK_SIZE; val++)
- printf("%x ", buf[val]);
- printf(" Hang!!!\n");
- for (;;);
- return 1;
- }
- buf += ECC_BLOCK_SIZE;
- page_addr += ECC_BLOCK_SIZE;
- }
-#endif
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 / 2048 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- int cntr;
- int len;
-
-#ifdef NAND_16BIT
- u16 *p = (u16 *) buf;
-#else
- u_char *p = (u_char *) buf;
-#endif
- len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_OOB, page_addr);
- NanD_Command(NAND_CMD_READSTART);
- NAND_WAIT_READY();
-
- /* A delay seems to be helping here. needs more investigation */
- delay(10000);
- for (cntr = 0; cntr < len; cntr++)
- *p++ = READ_NAND(NAND_ADDR);
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-loader/drivers/k9f5616.c b/uart-loader/drivers/k9f5616.c
deleted file mode 100644
index 4081664..0000000
--- a/uart-loader/drivers/k9f5616.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9F5616Q0C NAND chip driver for an OMAP16xx board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_NAND_K9F5616
-
-#define K9F5616_MFR 0xec
-#define K9F5616_ID 0x45
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define PAGE_SIZE 512
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char * buf, ulong page_addr);
-
-/* JFFS2 512-byte-page ECC layout */
-static u_char ecc_pos[] = {0,1,2,3,6,7};
-static u_char eccvalid_pos = 4;
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if(command == NAND_CMD_RESET){
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do{
- ret_val = READ_NAND(NAND_ADDR);/* wait till ready */
- } while((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(int numbytes, unsigned long ofs)
-{
- int i;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- ofs = ofs >> 8;
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE)
- for (i = 0; i < 2; i++, ofs = ofs >> 8)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- return (mfr != K9F5616_MFR || id != K9F5616_ID);
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
- uchar oob_buf[16];
-
- /* check bad block */
- /* 0th and 5th words need be 0xffff */
- if (nand_read_oob(oob_buf, block_addr) ||
-// oob_buf[0] != 0xff || oob_buf[1] != 0xff ||
-// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){
- oob_buf[5] != 0xff){
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-
- /* read the block page by page*/
- for (i=0; i<32; i++){
- if (nand_read_page(buf+offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
- u_char ecc_code[6];
- u_char ecc_calc[3];
- u_char oob_buf[16];
- u_char *p;
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1);
-
- NAND_WAIT_READY();
- p = buf;
- for (cntr = 0; cntr < 256; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
-
- p = oob_buf;
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < 6; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
-
- if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) {
- nand_calculate_ecc (buf, &ecc_calc[0]);
- if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr);
- return 1;
- }
- }
-
- if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) {
- nand_calculate_ecc (buf + 256, &ecc_calc[0]);
- if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr+0x100);
- return 1;
- }
- }
-
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READOOB);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1);
- NAND_WAIT_READY();
-
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
- }
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-loader/drivers/k9k1216.c b/uart-loader/drivers/k9k1216.c
deleted file mode 100644
index 888fb6b..0000000
--- a/uart-loader/drivers/k9k1216.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9K1216Q0C NAND chip driver for an OMAP2420 board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_NAND_K9K1216
-
-#define K9K1216_MFR 0xec
-#define K9K1216_ID 0x46
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define PAGE_SIZE 512
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char * buf, ulong page_addr);
-
-/* JFFS2 512-byte-page ECC layout */
-static u_char ecc_pos[] = {0,1,2,3,6,7};
-static u_char eccvalid_pos = 4;
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if(command == NAND_CMD_RESET){
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do{
- ret_val = READ_NAND(NAND_ADDR);/* wait till ready */
- } while((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(int numbytes, unsigned long ofs)
-{
- int i;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- ofs = ofs >> 9;
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE)
- for (i = 0; i < 3; i++, ofs = ofs >> 8)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- return (mfr != K9K1216_MFR || id != K9K1216_ID);
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
- uchar oob_buf[16];
-
- /* check bad block */
- /* 0th and 5th words need be 0xffff */
- if (nand_read_oob(oob_buf, block_addr) ||
-// oob_buf[0] != 0xff || oob_buf[1] != 0xff ||
-// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){
- oob_buf[5] != 0xff){
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-
- /* read the block page by page*/
- for (i=0; i<32; i++){
- if (nand_read_page(buf+offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-static count = 0;
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
- u_char ecc_code[6];
- u_char ecc_calc[3];
- u_char oob_buf[16];
- u_char *p;
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NAND_WAIT_READY();
-
- delay(500); /* we go through NFC need a bigger delay. 200 is not enough */
-
- p = buf;
- for (cntr = 0; cntr < 256; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
-
- p = oob_buf;
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
- count = 1;
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < 6; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
- if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) {
- nand_calculate_ecc (buf, &ecc_calc[0]);
- if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr);
- for (val=0; val <256; val++)
- printf("%x ", buf[val]);
- printf("\n");
- for (;;);
- return 1;
- }
- }
-
- if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) {
- nand_calculate_ecc (buf + 256, &ecc_calc[0]);
- if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr+0x100);
- for (val=0; val <256; val++)
- printf("%x ", buf[val+256]);
- printf("\n");
- for (;;);
- return 1;
- }
- }
-
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READOOB);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NAND_WAIT_READY();
-
-/* do {
- *(volatile u32 *)(0x6800A07c) = NAND_CMD_STATUS;
- val = *(volatile u32 *)(0x6800A084);
- printf("val = %x\n", val);
- } while ((val & 0x40) != 0x40);
-*/
- /* the above code from OSTBoot doesn't work, we use delay */
- delay(500); /* we go through NFC need a bigger delay. 200 is not enough */
-
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
- }
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-loader/drivers/ns16550.c b/uart-loader/drivers/ns16550.c
deleted file mode 100644
index b5a5c12..0000000
--- a/uart-loader/drivers/ns16550.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
- */
-
-#include <config.h>
-
-#ifdef CFG_PRINTF
-#ifdef CFG_NS16550
-
-#include <ns16550.h>
-
-#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
-
-void NS16550_init (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
-#ifdef CONFIG_OMAP
- com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
-#endif
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-#if defined(CONFIG_OMAP)
- com_port->mdr1 = 0; /* select uart mode */
-#endif
-}
-
-void NS16550_reinit (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-}
-
-void NS16550_putc (NS16550_t com_port, char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
-}
-
-char NS16550_getc (NS16550_t com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0);
- return (com_port->rbr);
-}
-
-int NS16550_tstc (NS16550_t com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
-
-#endif
-#endif
diff --git a/uart-loader/drivers/onenand.c b/uart-loader/drivers/onenand.c
deleted file mode 100644
index 7d4e454..0000000
--- a/uart-loader/drivers/onenand.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2005 Samsung Electronis
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/string.h>
-
-#include "onenand_regs.h"
-
-#define onenand_readw(a) (*(volatile unsigned short *)(a))
-#define onenand_writew(v, a) ((*(volatile unsigned short *)(a)) = (u16) (v))
-
-#define SAMSUNG_MFR_ID 0xEC
-#define KFM1G16Q2A_DEV_ID 0x30
-#define KFN2G16Q2A_DEV_ID 0x40
-
-#ifdef CFG_ONENAND
-
-#define THIS_ONENAND(a) (ONENAND_ADDR + (a))
-
-#define READ_INTERRUPT() \
- onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT))
-
-#define SET_EMIFS_CS_CONFIG(v) \
- (*(volatile unsigned long *)(OMAP_EMIFS_CS_CONFIG) = (v))
-
-#define onenand_block_address(block) (block)
-#define onenand_sector_address(page) (page << 2)
-#define onenand_buffer_address() ((1 << 3) << 8)
-#define onenand_bufferram_address(block) (0)
-
-#if defined(CFG_SYNC_BURST_READ) && defined(CONFIG_OMAP1610)
-static inline void set_sync_burst_read(void)
-{
- unsigned int value;
- value = 0
- | (0x1 << 15) /* Read Mode: Synchronous */
- | (0x4 << 12) /* Burst Read Latency: 4 cycles */
- | (0x4 << 9) /* Burst Length: 8 word */
- | (0x1 << 7) /* RDY signal plarity */
- | (0x1 << 6) /* INT signal plarity */
- | (0x1 << 5) /* I/O buffer enable */
- ;
- onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1));
-
- value = 0
- | (4 << 16) /* Synchronous Burst Read */
- | (1 << 12) /* PGWST/WELEN */
- | (1 << 8) /* WRWST */
- | (4 << 4) /* RDWST */
- | (1 << 0) /* FCLKDIV => 48MHz */
- ;
- SET_EMIFS_CS_CONFIG(value);
-}
-
-static inline void set_async_read(void)
-{
- unsigned int value;
- value = 0
- | (0x0 << 15) /* Read Mode: Asynchronous */
- | (0x4 << 12) /* Burst Read Latency: 4 cycles */
- | (0x0 << 9) /* Burst Length: continuous */
- | (0x1 << 7) /* RDY signal plarity */
- | (0x1 << 6) /* INT signal plarity */
- | (0x0 << 5) /* I/O buffer disable */
- ;
- onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1));
-
- value = 0
- | (0 << 16) /* Asynchronous Read */
- | (1 << 12) /* PGWST/WELEN */
- | (1 << 8) /* WRWST */
- | (3 << 4) /* RDWST */
- | (1 << 0) /* FCLKDIV => 48MHz */
- ;
- SET_EMIFS_CS_CONFIG(value);
-}
-#else
-#define set_sync_burst_read(...) do { } while (0)
-#define set_async_read(...) do { } while (0)
-#endif
-
-int
-onenand_chip()
-{
- unsigned short mf_id, dev_id;
- mf_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_MANUFACTURER_ID)));
- dev_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_DEVICE_ID)));
-
- if(mf_id == SAMSUNG_MFR_ID) {
- if (dev_id == KFM1G16Q2A_DEV_ID) {
- printf("Detected Samsung MuxOneNAND1G Flash \r\n");
- return 0;
- } else if (dev_id == KFN2G16Q2A_DEV_ID) {
- printf("Detected Samsung MuxOneNAND2G Flash \r\n");
- return 0;
- } else {
- printf(" ONENAND Flash unsupported\r\n");
- return 1;
- }
- } else {
- printf("ONENAND Flash Unsupported\r\n");
- return 1;
- }
-}
-
-/* read a page with ECC */
-static inline int onenand_read_page(ulong block, ulong page, u_char *buf)
-{
- unsigned long *base;
-
-#ifndef __HAVE_ARCH_MEMCPY32
- unsigned int offset, value;
- unsigned long *p;
-#endif
-
- onenand_writew(onenand_block_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS1));
-
- onenand_writew(onenand_sector_address(page),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS8));
-
- onenand_writew(onenand_buffer_address(),
- THIS_ONENAND(ONENAND_REG_START_BUFFER));
-
- onenand_writew(onenand_bufferram_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
-
- onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT));
-
- onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND));
-
-#ifndef __HAVE_ARCH_MEMCPY32
- p = (unsigned long *) buf;
-#endif
- base = (unsigned long *) (ONENAND_ADDR + ONENAND_DATARAM);
-
- while (!(READ_INTERRUPT() & ONENAND_INT_MASTER))
- continue;
-
-#ifdef __HAVE_ARCH_MEMCPY32
- /* 32 bytes boundary memory copy */
- memcpy32(buf, base, ONENAND_PAGE_SIZE);
-#else
- for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) {
- value = *(base + offset);
- *p++ = value;
- }
-#endif
-
- return 0;
-}
-
-#define ONENAND_START_PAGE 0
-#define ONENAND_PAGES_PER_BLOCK 64
-
-/**
- * onenand_read_block - Read a block data to buf
- * @return 0 on sucess
- */
-
-int onenand_read_block(unsigned char *buf, ulong block)
-{
- int page, offset = 0;
-
- set_sync_burst_read();
-
- /* NOTE: you must read page from page 1 of block 0 */
- /* read the block page by page*/
- for (page = ONENAND_START_PAGE;
- page < ONENAND_PAGES_PER_BLOCK; page++) {
-
- onenand_read_page(block, page, buf + offset);
-
- offset += ONENAND_PAGE_SIZE;
- }
-
- set_async_read();
-
- return 0;
-}
-
-#endif /* CFG_ONENAND */
diff --git a/uart-loader/drivers/onenand_regs.h b/uart-loader/drivers/onenand_regs.h
deleted file mode 100644
index d8acc8c..0000000
--- a/uart-loader/drivers/onenand_regs.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/include/linux/mtd/onenand_regs.h
- *
- * OneNAND Register header file
- *
- * Copyright (C) 2005 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ONENAND_REG_H
-#define __ONENAND_REG_H
-
-/* Memory Address Map Translation (Word order) */
-#define ONENAND_MEMORY_MAP(x) ((x) << 1)
-
-/*
- * External BufferRAM area
- */
-#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000)
-#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200)
-#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010)
-
-/*
- * OneNAND Registers
- */
-#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000)
-#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001)
-#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002)
-#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003)
-#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004)
-#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005)
-#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006)
-
-#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100)
-#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101)
-#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102)
-#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103)
-#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104)
-#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105)
-#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106)
-#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107)
-
-#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200)
-#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220)
-#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221)
-#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222)
-#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240)
-#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241)
-#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C)
-#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D)
-#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E)
-
-#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00)
-#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01)
-#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02)
-#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03)
-#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04)
-#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05)
-#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06)
-#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07)
-#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08)
-
-/*
- * Device ID Register F001h (R)
- */
-#define ONENAND_DEVICE_DENSITY_SHIFT (4)
-#define ONENAND_DEVICE_IS_DDP (1 << 3)
-#define ONENAND_DEVICE_IS_DEMUX (1 << 2)
-#define ONENAND_DEVICE_VCC_MASK (0x3)
-
-#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
-
-/*
- * Version ID Register F002h (R)
- */
-#define ONENAND_VERSION_PROCESS_SHIFT (8)
-
-/*
- * Start Address 1 F100h (R/W)
- */
-#define ONENAND_DDP_SHIFT (15)
-
-/*
- * Start Address 8 F107h (R/W)
- */
-#define ONENAND_FPA_MASK (0x3f)
-#define ONENAND_FPA_SHIFT (2)
-#define ONENAND_FSA_MASK (0x03)
-
-/*
- * Start Buffer Register F200h (R/W)
- */
-#define ONENAND_BSA_MASK (0x03)
-#define ONENAND_BSA_SHIFT (8)
-#define ONENAND_BSA_BOOTRAM (0 << 2)
-#define ONENAND_BSA_DATARAM0 (2 << 2)
-#define ONENAND_BSA_DATARAM1 (3 << 2)
-#define ONENAND_BSC_MASK (0x03)
-
-/*
- * Command Register F220h (R/W)
- */
-#define ONENAND_CMD_READ (0x00)
-#define ONENAND_CMD_READOOB (0x13)
-#define ONENAND_CMD_PROG (0x80)
-#define ONENAND_CMD_PROGOOB (0x1A)
-#define ONENAND_CMD_UNLOCK (0x23)
-#define ONENAND_CMD_LOCK (0x2A)
-#define ONENAND_CMD_LOCK_TIGHT (0x2C)
-#define ONENAND_CMD_ERASE (0x94)
-#define ONENAND_CMD_RESET (0xF0)
-#define ONENAND_CMD_READID (0x90)
-
-/* NOTE: Those are not *REAL* commands */
-#define ONENAND_CMD_BUFFERRAM (0x1978)
-
-/*
- * System Configuration 1 Register F221h (R, R/W)
- */
-#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15)
-#define ONENAND_SYS_CFG1_BRL (12)
-#define ONENAND_SYS_CFG1_BL (9)
-#define ONENAND_SYS_CFG1_NO_ECC (1 << 8)
-#define ONENAND_SYS_CFG1_RDY (1 << 7)
-#define ONENAND_SYS_CFG1_INT (1 << 6)
-#define ONENAND_SYS_CFG1_IOBE (1 << 5)
-#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4)
-
-/*
- * Controller Status Register F240h (R)
- */
-#define ONENAND_CTRL_ONGO (1 << 15)
-#define ONENAND_CTRL_LOCK (1 << 14)
-#define ONENAND_CTRL_LOAD (1 << 13)
-#define ONENAND_CTRL_PROGRAM (1 << 12)
-#define ONENAND_CTRL_ERASE (1 << 11)
-#define ONENAND_CTRL_ERROR (1 << 10)
-#define ONENAND_CTRL_RSTB (1 << 7)
-
-/*
- * Interrupt Status Register F241h (R)
- */
-#define ONENAND_INT_MASTER (1 << 15)
-#define ONENAND_INT_READ (1 << 7)
-#define ONENAND_INT_WRITE (1 << 6)
-#define ONENAND_INT_ERASE (1 << 5)
-#define ONENAND_INT_RESET (1 << 4)
-#define ONENAND_INT_CLEAR (0 << 0)
-
-/*
- * NAND Flash Write Protection Status Register F24Eh (R)
- */
-#define ONENAND_WP_US (1 << 2)
-#define ONENAND_WP_LS (1 << 1)
-#define ONENAND_WP_LTS (1 << 0)
-
-/*
- * ECC Status Reigser FF00h (R)
- */
-#define ONENAND_ECC_1BIT (1 << 0)
-#define ONENAND_ECC_2BIT (1 << 1)
-#define ONENAND_ECC_2BIT_ALL (0xAAAA)
-
-#endif /* __ONENAND_REG_H */
diff --git a/uart-loader/drivers/serial.c b/uart-loader/drivers/serial.c
deleted file mode 100644
index b9ecf2a..0000000
--- a/uart-loader/drivers/serial.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_PRINTF
-#ifdef CFG_NS16550_SERIAL
-
-#include <ns16550.h>
-#ifdef CFG_NS87308
-#include <ns87308.h>
-#endif
-
-#if CONFIG_CONS_INDEX == 1
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM1;
-#elif CONFIG_CONS_INDEX == 2
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM2;
-#elif CONFIG_CONS_INDEX == 3
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM3;
-#elif CONFIG_CONS_INDEX == 4
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM4;
-#else
-#error no valid console defined
-#endif
-
-static int calc_divisor (void)
-{
-// DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_OMAP1510
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 12000000) && (CONFIG_BAUDRATE == 115200)) {
- console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
- return (1); /* return 1 for base divisor */
- }
- console->osc_12m_sel = 0; /* clear if previsouly set */
-#endif
-#if defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP1710)
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 48000000) && (CONFIG_BAUDRATE == 115200)) {
- return (26); /* return 26 for base divisor */
- }
-#endif
- return (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-}
-
-int serial_init (void)
-{
- int clock_divisor = calc_divisor();
-
-#ifdef CFG_NS87308
- initialise_ns87308();
-#endif
-
- NS16550_init(console, clock_divisor);
-
- return (0);
-}
-
-void
-serial_putc(const char c)
-{
- if (c == '\n')
- NS16550_putc(console, '\r');
-
- NS16550_putc(console, c);
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-
-int
-serial_getc(void)
-{
- return NS16550_getc(console);
-}
-
-int
-serial_tstc(void)
-{
- return NS16550_tstc(console);
-}
-
-void
-serial_setbrg (void)
-{
- int clock_divisor;
-
- clock_divisor = calc_divisor();
- NS16550_reinit(console, clock_divisor);
-}
-
-#endif
-#endif
diff --git a/uart-loader/fs/Makefile b/uart-loader/fs/Makefile
deleted file mode 100644
index f419b99..0000000
--- a/uart-loader/fs/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-
-SUBDIRS := fat
-
-.depend all:
- @for dir in $(SUBDIRS) ; do \
- $(MAKE) -C $$dir $@ ; done
diff --git a/uart-loader/fs/fat/Makefile b/uart-loader/fs/fat/Makefile
deleted file mode 100644
index e462757..0000000
--- a/uart-loader/fs/fat/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TOPDIR=../../
-
-include $(TOPDIR)/config.mk
-
-LIB = libfat.a
-
-AOBJS =
-COBJS = fat.o file.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-all: $(LIB) $(AOBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/fs/fat/fat.c b/uart-loader/fs/fat/fat.c
deleted file mode 100644
index bad4f6c..0000000
--- a/uart-loader/fs/fat/fat.c
+++ /dev/null
@@ -1,927 +0,0 @@
-/*
- * fat.c
- *
- * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg
- *
- * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6
- * 2003-03-10 - kharris@nexus-tech.net - ported to uboot
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <part.h>
-#include <fat.h>
-#include <asm/byteorder.h>
-
-#ifdef CFG_CMD_FAT
-
-/*
- * Convert a string to lowercase.
- */
-static void
-downcase(char *str)
-{
- while (*str != '\0') {
- TOLOWER(*str);
- str++;
- }
-}
-
-static block_dev_desc_t *cur_dev = NULL;
-static unsigned long part_offset = 0;
-static int cur_part = 1;
-
-#define DOS_PART_TBL_OFFSET 0x1be
-#define DOS_PART_MAGIC_OFFSET 0x1fe
-#define DOS_FS_TYPE_OFFSET 0x52
-
-int strncmp(const char * cs,const char * ct,size_t count)
-{
- register signed char __res = 0;
-
- while (count) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- count--;
- }
-
- return __res;
-}
-
-char * strcpy(char * dest,const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-
-int strcmp(const char * cs,const char * ct)
-{
- register signed char __res;
-
- while (1) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- }
-
- return __res;
-}
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-
-
-int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr)
-{
- startblock += part_offset;
- if (cur_dev == NULL)
- return -1;
- if (cur_dev->block_read) {
- return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr);
- }
- return -1;
-}
-
-
-int
-fat_register_device(block_dev_desc_t *dev_desc, int part_no)
-{
- unsigned char buffer[SECTOR_SIZE];
-
- if (!dev_desc->block_read)
- return -1;
- cur_dev=dev_desc;
- /* check if we have a MBR (on floppies we have only a PBR) */
- if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
- printf ("** Can't read from device %d **\n", dev_desc->dev);
- return -1;
- }
- if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
- buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
- /* no signature found */
- return -1;
- }
- if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
- /* ok, we assume we are on a PBR only */
- cur_part = 1;
- part_offset=0;
- }
- else {
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_COMMANDS & CFG_CMD_MMC) || defined(CONFIG_SYSTEMACE)
- disk_partition_t info;
- if(!get_partition_info(dev_desc, part_no, &info)) {
- part_offset = info.start;
- cur_part = part_no;
- }
- else {
- printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev);
- return -1;
- }
-#else
- /* FIXME we need to determine the start block of the
- * partition where the DOS FS resides. This can be done
- * by using the get_partition_info routine. For this
- * purpose the libpart must be included.
- */
- part_offset=63;
- //part_offset=0;
- cur_part = 1;
-#endif
- }
- return 0;
-}
-
-
-/*
- * Get the first occurence of a directory delimiter ('/' or '\') in a string.
- * Return index into string if found, -1 otherwise.
- */
-static int
-dirdelim(char *str)
-{
- char *start = str;
-
- while (*str != '\0') {
- if (ISDIRDELIM(*str)) return str - start;
- str++;
- }
- return -1;
-}
-
-
-/*
- * Match volume_info fs_type strings.
- * Return 0 on match, -1 otherwise.
- */
-static int
-compare_sign(char *str1, char *str2)
-{
- char *end = str1+SIGNLEN;
-
- while (str1 != end) {
- if (*str1 != *str2) {
- return -1;
- }
- str1++;
- str2++;
- }
-
- return 0;
-}
-
-
-/*
- * Extract zero terminated short name from a directory entry.
- */
-static void get_name (dir_entry *dirent, char *s_name)
-{
- char *ptr;
-
- memcpy (s_name, dirent->name, 8);
- s_name[8] = '\0';
- ptr = s_name;
- while (*ptr && *ptr != ' ')
- ptr++;
- if (dirent->ext[0] && dirent->ext[0] != ' ') {
- *ptr = '.';
- ptr++;
- memcpy (ptr, dirent->ext, 3);
- ptr[3] = '\0';
- while (*ptr && *ptr != ' ')
- ptr++;
- }
- *ptr = '\0';
- if (*s_name == DELETED_FLAG)
- *s_name = '\0';
- else if (*s_name == aRING)
- *s_name = 'å';
- downcase (s_name);
-}
-
-/*
- * Get the entry at index 'entry' in a FAT (12/16/32) table.
- * On failure 0x00 is returned.
- */
-static __u32
-get_fatent(fsdata *mydata, __u32 entry)
-{
- __u32 bufnum;
- __u32 offset;
- __u32 ret = 0x00;
-
- switch (mydata->fatsize) {
- case 32:
- bufnum = entry / FAT32BUFSIZE;
- offset = entry - bufnum * FAT32BUFSIZE;
- break;
- case 16:
- bufnum = entry / FAT16BUFSIZE;
- offset = entry - bufnum * FAT16BUFSIZE;
- break;
- case 12:
- bufnum = entry / FAT12BUFSIZE;
- offset = entry - bufnum * FAT12BUFSIZE;
- break;
-
- default:
- /* Unsupported FAT size */
- return ret;
- }
- /* Read a new block of FAT entries into the cache. */
- if (bufnum != mydata->fatbufnum) {
- int getsize = FATBUFSIZE/FS_BLOCK_SIZE;
- __u8 *bufptr = mydata->fatbuf;
- __u32 fatlength = mydata->fatlength;
- __u32 startblock = bufnum * FATBUFBLOCKS;
- unsigned long i;
-
- fatlength *= SECTOR_SIZE; /* We want it in bytes now */
- startblock += mydata->fat_sect; /* Offset from start of disk */
-
- if (getsize > fatlength) getsize = fatlength;
- if (disk_read(startblock, getsize, bufptr) < 0) {
- FAT_DPRINT("Error reading FAT blocks\n");
- return ret;
- }
- mydata->fatbufnum = bufnum;
- }
-
- /* Get the actual entry from the table */
- switch (mydata->fatsize) {
- case 32:
- ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]);
- break;
- case 16:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]);
- break;
- case 12: {
- __u32 off16 = (offset*3)/4;
- __u16 val1, val2;
-
- switch (offset & 0x3) {
- case 0:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- ret &= 0xfff;
- break;
- case 1:
- val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- val1 &= 0xf000;
- val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]);
- val2 &= 0x00ff;
- ret = (val2 << 4) | (val1 >> 12);
- break;
- case 2:
- val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- val1 &= 0xff00;
- val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]);
- val2 &= 0x000f;
- ret = (val2 << 8) | (val1 >> 8);
- break;
- case 3:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);;
- ret = (ret & 0xfff0) >> 4;
- break;
- default:
- break;
- }
- }
- break;
- }
- FAT_DPRINT("ret: %d, offset: %d\n", ret, offset);
-
- return ret;
-}
-
-
-/*
- * Read at most 'size' bytes from the specified cluster into 'buffer'.
- * Return 0 on success, -1 otherwise.
- */
-static int
-get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size)
-{
- int idx = 0;
- __u32 startsect;
-
- if (clustnum > 0) {
- startsect = mydata->data_begin + clustnum*mydata->clust_size;
- } else {
- startsect = mydata->rootdir_sect;
- }
-
- if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) {
- FAT_DPRINT("Error reading data\n");
- return -1;
- }
- if(size % FS_BLOCK_SIZE) {
- __u8 tmpbuf[FS_BLOCK_SIZE];
- idx= size/FS_BLOCK_SIZE;
- if (disk_read(startsect + idx, 1, tmpbuf) < 0) {
- FAT_DPRINT("Error reading data\n");
- return -1;
- }
- buffer += idx*FS_BLOCK_SIZE;
-
- memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE);
- return 0;
- }
-
- return 0;
-}
-
-
-/*
- * Read at most 'maxsize' bytes from the file associated with 'dentptr'
- * into 'buffer'.
- * Return the number of bytes read or -1 on fatal errors.
- */
-static long
-get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
- unsigned long maxsize)
-{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
- unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE;
- __u32 curclust = START(dentptr);
- __u32 endclust, newclust;
- unsigned long actsize;
-
- FAT_DPRINT("Filesize: %ld bytes\n", filesize);
-
- if (maxsize > 0 && filesize > maxsize) filesize = maxsize;
-
- FAT_DPRINT("Reading: %ld bytes\n", filesize);
-
- actsize=bytesperclust;
- endclust=curclust;
- do {
- /* search for consecutive clusters */
- while(actsize < filesize) {
- newclust = get_fatent(mydata, endclust);
- if((newclust -1)!=endclust)
- goto getit;
- if (newclust <= 0x0001 || newclust >= 0xfff0) {
- FAT_DPRINT("curclust: 0x%x\n", newclust);
- FAT_DPRINT("Invalid FAT entry\n");
- return gotsize;
- }
- endclust=newclust;
- actsize+= bytesperclust;
- }
- /* actsize >= file size */
- actsize -= bytesperclust;
- /* get remaining clusters */
- if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- /* get remaining bytes */
- gotsize += (int)actsize;
- filesize -= actsize;
- buffer += actsize;
- actsize= filesize;
- if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- gotsize+=actsize;
- return gotsize;
-getit:
- if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- gotsize += (int)actsize;
- filesize -= actsize;
- buffer += actsize;
- curclust = get_fatent(mydata, endclust);
- if (curclust <= 0x0001 || curclust >= 0xfff0) {
- FAT_DPRINT("curclust: 0x%x\n", curclust);
- FAT_ERROR("Invalid FAT entry\n");
- return gotsize;
- }
- actsize=bytesperclust;
- endclust=curclust;
- } while (1);
-}
-
-
-#ifdef CONFIG_SUPPORT_VFAT
-/*
- * Extract the file name information from 'slotptr' into 'l_name',
- * starting at l_name[*idx].
- * Return 1 if terminator (zero byte) is found, 0 otherwise.
- */
-static int
-slot2str(dir_slot *slotptr, char *l_name, int *idx)
-{
- int j;
-
- for (j = 0; j <= 8; j += 2) {
- l_name[*idx] = slotptr->name0_4[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
- for (j = 0; j <= 10; j += 2) {
- l_name[*idx] = slotptr->name5_10[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
- for (j = 0; j <= 2; j += 2) {
- l_name[*idx] = slotptr->name11_12[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
-
- return 0;
-}
-
-/* Calculate short name checksum */
-static __u8
-mkcksum(const char *str)
-{
- int i;
- __u8 ret = 0;
-
- for (i = 0; i < 11; i++) {
- ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i];
- }
-
- return ret;
-}
-#endif
-
-
-/*
- * Get the directory entry associated with 'filename' from the directory
- * starting at 'startsect'
- */
-
-
-static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
- char *filename, dir_entry * retdent,
- int dols)
-{
-
-}
-
-#if 0
-__u8 get_dentfromdir_block[MAX_CLUSTSIZE];
-static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
- char *filename, dir_entry * retdent,
- int dols)
-{
- __u16 prevcksum = 0xffff;
- __u32 curclust = START (retdent);
- int files = 0, dirs = 0;
-
- while (1) {
- dir_entry *dentptr;
- int i;
-
- if (get_cluster (mydata, curclust, get_dentfromdir_block,
- mydata->clust_size * SECTOR_SIZE) != 0) {
- FAT_DPRINT ("Error: reading directory block\n");
- return NULL;
- }
- dentptr = (dir_entry *) get_dentfromdir_block;
- for (i = 0; i < DIRENTSPERCLUST; i++) {
- char s_name[14], l_name[256];
-
- l_name[0] = '\0';
- if (dentptr->name[0] == DELETED_FLAG) {
- dentptr++;
- continue;
- }
- if ((dentptr->attr & ATTR_VOLUME)) {
- /* Volume label or VFAT entry */
- dentptr++;
- continue;
- }
- if (dentptr->name[0] == 0) {
- if (dols) {
- printf ("\n%d file(s), %d dir(s)\n\n", files, dirs);
- }
- FAT_DPRINT ("Dentname == NULL - %d\n", i);
- return NULL;
- }
-#ifdef CONFIG_SUPPORT_VFAT
- if (dols && mkcksum (dentptr->name) == prevcksum) {
- dentptr++;
- continue;
- }
-#endif
- get_name (dentptr, s_name);
- if (dols) {
- int isdir = (dentptr->attr & ATTR_DIR);
- char dirc;
- int doit = 0;
-
- if (isdir) {
- dirs++;
- dirc = '/';
- doit = 1;
- } else {
- dirc = ' ';
- if (s_name[0] != 0) {
- files++;
- doit = 1;
- }
- }
- if (doit) {
- if (dirc == ' ') {
- printf (" %8ld %s%c\n",
- (long) FAT2CPU32 (dentptr->size), s_name,
- dirc);
- } else {
- printf (" %s%c\n", s_name, dirc);
- }
- }
- dentptr++;
- continue;
- }
- if (strcmp (filename, s_name) && strcmp (filename, l_name)) {
- FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name);
- dentptr++;
- continue;
- }
- memcpy (retdent, dentptr, sizeof (dir_entry));
-
- FAT_DPRINT ("DentName: %s", s_name);
- FAT_DPRINT (", start: 0x%x", START (dentptr));
- FAT_DPRINT (", size: 0x%x %s\n",
- FAT2CPU32 (dentptr->size),
- (dentptr->attr & ATTR_DIR) ? "(DIR)" : "");
-
- return retdent;
- }
- curclust = get_fatent (mydata, curclust);
- if (curclust <= 0x0001 || curclust >= 0xfff0) {
- FAT_DPRINT ("curclust: 0x%x\n", curclust);
- FAT_ERROR ("Invalid FAT entry\n");
- return NULL;
- }
- }
-
- return NULL;
-}
-#endif
-
-
-/*
- * Read boot sector and volume info from a FAT filesystem
- */
-static int
-read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize)
-{
- __u8 block[FS_BLOCK_SIZE];
- volume_info *vistart;
-
- FAT_DPRINT("Reading boot sector\n");
-
- if (disk_read(0, 1, block) < 0) {
- FAT_DPRINT("Error: reading block\n");
- return -1;
- }
-
- memcpy(bs, block, sizeof(boot_sector));
- bs->reserved = FAT2CPU16(bs->reserved);
- bs->fat_length = FAT2CPU16(bs->fat_length);
- bs->secs_track = FAT2CPU16(bs->secs_track);
- bs->heads = FAT2CPU16(bs->heads);
-#if 0 /* UNUSED */
- bs->hidden = FAT2CPU32(bs->hidden);
-#endif
- bs->total_sect = FAT2CPU32(bs->total_sect);
-
- /* FAT32 entries */
- if (bs->fat_length == 0) {
- /* Assume FAT32 */
- bs->fat32_length = FAT2CPU32(bs->fat32_length);
- bs->flags = FAT2CPU16(bs->flags);
- bs->root_cluster = FAT2CPU32(bs->root_cluster);
- bs->info_sector = FAT2CPU16(bs->info_sector);
- bs->backup_boot = FAT2CPU16(bs->backup_boot);
- vistart = (volume_info*) (block + sizeof(boot_sector));
- *fatsize = 32;
- } else {
- vistart = (volume_info*) &(bs->fat32_length);
- *fatsize = 0;
- }
- memcpy(volinfo, vistart, sizeof(volume_info));
-
- /* Terminate fs_type string. Writing past the end of vistart
- is ok - it's just the buffer. */
- vistart->fs_type[8] = '\0';
-
- if (*fatsize == 32) {
- if (compare_sign(FAT32_SIGN, vistart->fs_type) == 0) {
- return 0;
- }
- } else {
- if (compare_sign(FAT12_SIGN, vistart->fs_type) == 0) {
- *fatsize = 12;
- return 0;
- }
- if (compare_sign(FAT16_SIGN, vistart->fs_type) == 0) {
- *fatsize = 16;
- return 0;
- }
- }
-
- FAT_DPRINT("Error: broken fs_type sign\n");
- return -1;
-}
-
-#if 0
-__u8 do_fat_read_block[MAX_CLUSTSIZE]; /* Block buffer */
-#endif
-
-__u8 *fnamecopy = 0x80500000;
-__u8 *do_fat_read_block = 0x80500880;
-
-boot_sector bs;
-volume_info volinfo;
-fsdata datablock;
-
-long
-do_fat_read(const char *filename, void *buffer, unsigned long maxsize,
- int dols)
-{
-#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */
- static
-#endif
- fsdata *mydata = &datablock;
- dir_entry *dentptr;
- __u16 prevcksum = 0xffff;
- char *subname = "";
- int rootdir_size, cursect;
- int idx, isdir = 0;
- int files = 0, dirs = 0;
- long ret = 0;
- int firsttime;
-
- if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) {
- printf ("Error: reading boot sector\n");
- return -1;
- }
- if (mydata->fatsize == 32) {
- mydata->fatlength = bs.fat32_length;
- } else {
- mydata->fatlength = bs.fat_length;
- }
- mydata->fat_sect = bs.reserved;
- cursect = mydata->rootdir_sect
- = mydata->fat_sect + mydata->fatlength * bs.fats;
- mydata->clust_size = bs.cluster_size;
- if (mydata->fatsize == 32) {
- rootdir_size = mydata->clust_size;
- mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */
- - (mydata->clust_size * 2);
- } else {
- rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0])
- * sizeof (dir_entry)) / SECTOR_SIZE;
- mydata->data_begin = mydata->rootdir_sect + rootdir_size
- - (mydata->clust_size * 2);
- }
- mydata->fatbufnum = -1;
-
- FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize,
- mydata->fatlength);
- FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n"
- "Data begins at: %d\n",
- mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE,
- rootdir_size, mydata->data_begin);
- FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size);
-
- /* "cwd" is always the root... */
- while (ISDIRDELIM (*filename))
- filename++;
- /* Make a copy of the filename and convert it to lowercase */
- strcpy (fnamecopy, filename);
- downcase (fnamecopy);
- if (*fnamecopy == '\0') {
- if (!dols){
- printf("\n not there\n");
- return -1;
- }
- dols = LS_ROOT;
- } else if ((idx = dirdelim (fnamecopy)) >= 0) {
- isdir = 1;
- fnamecopy[idx] = '\0';
- subname = fnamecopy + idx + 1;
- /* Handle multiple delimiters */
- while (ISDIRDELIM (*subname))
- subname++;
- } else if (dols) {
- isdir = 1;
- }
-
- while (1) {
- int i;
-
- if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) {
- printf ("Error: reading rootdir block\n");
- return -1;
- }
- dentptr = (dir_entry *) do_fat_read_block;
- for (i = 0; i < DIRENTSPERBLOCK; i++) {
- char s_name[14], l_name[256];
-
- l_name[0] = '\0';
- if ((dentptr->attr & ATTR_VOLUME)) {
- /* Volume label or VFAT entry */
- dentptr++;
- continue;
- } else if (dentptr->name[0] == 0) {
- FAT_DPRINT ("RootDentname == NULL - %d\n", i);
- if (dols == LS_ROOT) {
- printf ("\n%d file(s), %d dir(s)\n\n", files, dirs);
- return 0;
- }
- return -1;
- }
-#ifdef CONFIG_SUPPORT_VFAT
- else if (dols == LS_ROOT
- && mkcksum (dentptr->name) == prevcksum) {
- dentptr++;
- continue;
- }
-#endif
- get_name (dentptr, s_name);
- if (dols == LS_ROOT) {
- int isdir = (dentptr->attr & ATTR_DIR);
- char dirc;
- int doit = 0;
-
- if (isdir) {
- dirc = '/';
- if (s_name[0] != 0) {
- dirs++;
- doit = 1;
- }
- } else {
- dirc = ' ';
- if (s_name[0] != 0) {
- files++;
- doit = 1;
- }
- }
- if (doit) {
- if (dirc == ' ') {
- printf (" %8ld %s%c\n",
- (long) FAT2CPU32 (dentptr->size), s_name,
- dirc);
- } else {
- printf (" %s%c\n", s_name, dirc);
- }
- }
- dentptr++;
- continue;
- }
- if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) {
- FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name);
- dentptr++;
- continue;
- }
- if (isdir && !(dentptr->attr & ATTR_DIR))
- return -1;
-
- FAT_DPRINT ("RootName: %s", s_name);
- FAT_DPRINT (", start: 0x%x", START (dentptr));
- FAT_DPRINT (", size: 0x%x %s\n",
- FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : "");
-
- goto rootdir_done; /* We got a match */
- }
- cursect++;
- }
- rootdir_done:
-
- firsttime = 1;
- while (isdir) {
- int startsect = mydata->data_begin
- + START (dentptr) * mydata->clust_size;
- dir_entry dent;
- char *nextname = NULL;
-
- dent = *dentptr;
- dentptr = &dent;
- idx = dirdelim (subname);
- if (idx >= 0) {
- subname[idx] = '\0';
- nextname = subname + idx + 1;
- /* Handle multiple delimiters */
- while (ISDIRDELIM (*nextname))
- nextname++;
- if (dols && *nextname == '\0')
- firsttime = 0;
- } else {
- if (dols && firsttime) {
- firsttime = 0;
- } else {
- isdir = 0;
- }
- }
-
- if (get_dentfromdir (mydata, startsect, subname, dentptr,
- isdir ? 0 : dols) == NULL) {
- if (dols && !isdir)
- return 0;
- return -1;
- }
-
- if (idx >= 0) {
- if (!(dentptr->attr & ATTR_DIR))
- return -1;
- subname = nextname;
- }
- }
- ret = get_contents (mydata, dentptr, buffer, maxsize);
- FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret);
-
- return ret;
-}
-
-
-int
-file_fat_detectfs(void)
-{
- boot_sector bs;
- volume_info volinfo;
- int fatsize;
- char vol_label[12];
-
- if(cur_dev==NULL) {
- printf("No current device\n");
- return 1;
- }
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_MMC)
- printf("Interface: ");
- switch(cur_dev->if_type) {
- case IF_TYPE_IDE : printf("IDE"); break;
- case IF_TYPE_SCSI : printf("SCSI"); break;
- case IF_TYPE_ATAPI : printf("ATAPI"); break;
- case IF_TYPE_USB : printf("USB"); break;
- case IF_TYPE_DOC : printf("DOC"); break;
- case IF_TYPE_MMC : printf("MMC"); break;
- default : printf("Unknown");
- }
- printf("\n Device %d: ",cur_dev->dev);
- dev_print(cur_dev);
-#endif
- if(read_bootsectandvi(&bs, &volinfo, &fatsize)) {
- printf("\nNo valid FAT fs found\n");
- return 1;
- }
- memcpy (vol_label, volinfo.volume_label, 11);
- vol_label[11] = '\0';
- volinfo.fs_type[5]='\0';
- printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label);
- return 0;
-}
-
-
-int
-file_fat_ls(const char *dir)
-{
- return do_fat_read(dir, NULL, 0, LS_YES);
-}
-
-
-long
-file_fat_read(const char *filename, void *buffer, unsigned long maxsize)
-{
- long ret;
- ret = do_fat_read(filename, buffer, maxsize, LS_NO);
- return ret;
-}
-
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */
diff --git a/uart-loader/fs/fat/file.c b/uart-loader/fs/fat/file.c
deleted file mode 100644
index 2a2354e..0000000
--- a/uart-loader/fs/fat/file.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * file.c
- *
- * Mini "VFS" by Marcus Sundberg
- *
- * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6
- * 2003-03-10 - kharris@nexus-tech.net - ported to uboot
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <malloc.h>
-#include <part.h>
-#include <fat.h>
-#include <linux/stat.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_FAT)
-
-/* Supported filesystems */
-static const struct filesystem filesystems[] = {
- { file_fat_detectfs, file_fat_ls, file_fat_read, "FAT" },
-};
-#define NUM_FILESYS (sizeof(filesystems)/sizeof(struct filesystem))
-
-/* The filesystem which was last detected */
-static int current_filesystem = FSTYPE_NONE;
-
-/* The current working directory */
-#define CWD_LEN 511
-char file_cwd[CWD_LEN+1] = "/";
-
-const char *
-file_getfsname(int idx)
-{
- if (idx < 0 || idx >= NUM_FILESYS) return NULL;
-
- return filesystems[idx].name;
-}
-
-
-static void
-pathcpy(char *dest, const char *src)
-{
- char *origdest = dest;
-
- do {
- if (dest-file_cwd >= CWD_LEN) {
- *dest = '\0';
- return;
- }
- *(dest) = *(src);
- if (*src == '\0') {
- if (dest-- != origdest && ISDIRDELIM(*dest)) {
- *dest = '\0';
- }
- return;
- }
- ++dest;
- if (ISDIRDELIM(*src)) {
- while (ISDIRDELIM(*src)) src++;
- } else {
- src++;
- }
- } while (1);
-}
-
-
-int
-file_cd(const char *path)
-{
- if (ISDIRDELIM(*path)) {
- while (ISDIRDELIM(*path)) path++;
- strncpy(file_cwd+1, path, CWD_LEN-1);
- } else {
- const char *origpath = path;
- char *tmpstr = file_cwd;
- int back = 0;
-
- while (*tmpstr != '\0') tmpstr++;
- do {
- tmpstr--;
- } while (ISDIRDELIM(*tmpstr));
-
- while (*path == '.') {
- path++;
- while (*path == '.') {
- path++;
- back++;
- }
- if (*path != '\0' && !ISDIRDELIM(*path)) {
- path = origpath;
- back = 0;
- break;
- }
- while (ISDIRDELIM(*path)) path++;
- origpath = path;
- }
-
- while (back--) {
- /* Strip off path component */
- while (!ISDIRDELIM(*tmpstr)) {
- tmpstr--;
- }
- if (tmpstr == file_cwd) {
- /* Incremented again right after the loop. */
- tmpstr--;
- break;
- }
- /* Skip delimiters */
- while (ISDIRDELIM(*tmpstr)) tmpstr--;
- }
- tmpstr++;
- if (*path == '\0') {
- if (tmpstr == file_cwd) {
- *tmpstr = '/';
- tmpstr++;
- }
- *tmpstr = '\0';
- return 0;
- }
- *tmpstr = '/';
- pathcpy(tmpstr+1, path);
- }
-
- return 0;
-}
-
-
-int
-file_detectfs(void)
-{
- int i;
-
- current_filesystem = FSTYPE_NONE;
-
- for (i = 0; i < NUM_FILESYS; i++) {
- if (filesystems[i].detect() == 0) {
- strcpy(file_cwd, "/");
- current_filesystem = i;
- break;
- }
- }
-
- return current_filesystem;
-}
-
-
-int
-file_ls(const char *dir)
-{
- char fullpath[1024];
- const char *arg;
-
- if (current_filesystem == FSTYPE_NONE) {
- printf("Can't list files without a filesystem!\n");
- return -1;
- }
-
- if (ISDIRDELIM(*dir)) {
- arg = dir;
- } else {
- sprintf(fullpath, "%s/%s", file_cwd, dir);
- arg = fullpath;
- }
- return filesystems[current_filesystem].ls(arg);
-}
-
-
-long
-file_read(const char *filename, void *buffer, unsigned long maxsize)
-{
- char fullpath[1024];
- const char *arg;
-
- if (current_filesystem == FSTYPE_NONE) {
- printf("Can't load file without a filesystem!\n");
- return -1;
- }
-
- if (ISDIRDELIM(*filename)) {
- arg = filename;
- } else {
- sprintf(fullpath, "%s/%s", file_cwd, filename);
- arg = fullpath;
- }
-
- return filesystems[current_filesystem].read(arg, buffer, maxsize);
-}
-
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */
diff --git a/uart-loader/include/asm/arch-arm1136/bits.h b/uart-loader/include/asm/arch-arm1136/bits.h
deleted file mode 100644
index dc3273e..0000000
--- a/uart-loader/include/asm/arch-arm1136/bits.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software; you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0 (1<<0)
-#define BIT1 (1<<1)
-#define BIT2 (1<<2)
-#define BIT3 (1<<3)
-#define BIT4 (1<<4)
-#define BIT5 (1<<5)
-#define BIT6 (1<<6)
-#define BIT7 (1<<7)
-#define BIT8 (1<<8)
-#define BIT9 (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
-
diff --git a/uart-loader/include/asm/arch-arm1136/clocks.h b/uart-loader/include/asm/arch-arm1136/clocks.h
deleted file mode 120000
index c4b03ba..0000000
--- a/uart-loader/include/asm/arch-arm1136/clocks.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-arm1136/clocks242x.h b/uart-loader/include/asm/arch-arm1136/clocks242x.h
deleted file mode 120000
index f080726..0000000
--- a/uart-loader/include/asm/arch-arm1136/clocks242x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks242x.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-arm1136/clocks243x.h b/uart-loader/include/asm/arch-arm1136/clocks243x.h
deleted file mode 120000
index 703bdce..0000000
--- a/uart-loader/include/asm/arch-arm1136/clocks243x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks243x.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-arm1136/mem.h b/uart-loader/include/asm/arch-arm1136/mem.h
deleted file mode 120000
index dd453b2..0000000
--- a/uart-loader/include/asm/arch-arm1136/mem.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/mem.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-arm1136/omap2420.h b/uart-loader/include/asm/arch-arm1136/omap2420.h
deleted file mode 100644
index 2164b68..0000000
--- a/uart-loader/include/asm/arch-arm1136/omap2420.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) 2005 Texas Instruments, <www.ti.com>
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/arch/sizes.h>
-
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-
-/*
- * 2420 specific Section
- */
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE (0x48000000)
-#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* TAP information */
-#define OMAP2420_TAP_BASE (0x48014000)
-#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE (0x6800A000)
-#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14)
-#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64)
-#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0)
-#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4)
-#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
-#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4)
-#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8)
-
-#define OMAP2420_SDRC_CS0 0x80000000
-#define OMAP2420_SDRC_CS1 0xA0000000
-
-#define LOADDLL BIT2
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1 0x4806A000
-#define OMAP2420_UART2 0x4806C000
-#define OMAP2420_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1 0x48028000
-#define OMAP2420_GPT2 0x4802A000
-#define OMAP2420_GPT3 0x48078000
-#define OMAP2420_GPT4 0x4807A000
-#define OMAP2420_GPT5 0x4807C000
-#define OMAP2420_GPT6 0x4807E000
-#define OMAP2420_GPT7 0x48080000
-#define OMAP2420_GPT8 0x48082000
-#define OMAP2420_GPT9 0x48084000
-#define OMAP2420_GPT10 0x48086000
-#define OMAP2420_GPT11 0x48088000
-#define OMAP2420_GPT12 0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE 0x48020000
-#define WD2_BASE 0x48022000
-#define WD3_BASE 0x48024000
-#define WD4_BASE 0x48026000
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- * The 2420's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A /* Pre version B */
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#else
-# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x08000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
-#endif /* endif CONFIG_2420H4 */
-
-#endif
-
diff --git a/uart-loader/include/asm/arch-arm1136/omap2430.h b/uart-loader/include/asm/arch-arm1136/omap2430.h
deleted file mode 100644
index cf2b0f9..0000000
--- a/uart-loader/include/asm/arch-arm1136/omap2430.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2430_SYS_H_
-#define _OMAP2430_SYS_H_
-
-#include <asm/arch/sizes.h>
-
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-/* device type */
-#define DEVICE_MASK (BIT8|BIT9|BIT10)
-#define TST_DEVICE 0x0
-#define EMU_DEVICE 0x1
-#define HS_DEVICE 0x2
-#define GP_DEVICE 0x3
-
-/*
- * 2430 specific Section
- */
-#define OMAP243X_CORE_L4_IO_BASE 0x48000000
-#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000
-#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE
-
-
-/* CONTROL */
-#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000)
-#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8)
-
-/* TAP information */
-#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000)
-#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204)
-
-/*
- GPMC : In 2430 NOR and NAND can coexist.
- During NAND booting , NAND is at CS0 and NOR at CS1
- and Debug FPGA is GPMC_CS5
-*/
-#define OMAP24XX_GPMC_BASE (0x6E000000)
-
-#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10)
-#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14)
-#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150)
-#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154)
-#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158)
-#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C)
-#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160)
-#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164)
-#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168)
-
-
-/* SMS */
-#define OMAP24XX_SMS_BASE 0x6C000000
-#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10)
-
-/* SDRC */
-#define OMAP24XX_SDRC_BASE 0x6D000000
-#define OMAP24XX_SDRC_CS0 0x80000000
-#define OMAP24XX_SDRC_CS1 0xA0000000
-#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14)
-#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60)
-#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64)
-#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0)
-#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8)
-#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4)
-
-#define LOADDLL BIT2
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2430_UART1 0x4806A000
-#define OMAP2430_UART2 0x4806C000
-#define OMAP2430_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000)
-#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
-#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
-#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
-#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
-#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
-#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
-#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
-#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
-#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
-#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
-#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000)
-#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000)
-#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */
-#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000)
-
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000)
-#define S32K_CR (SYNC_32KTIMER_BASE+0x10)
-
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000)
-
-#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060)
-#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070)
-#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078)
-#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080)
-#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084)
-#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244)
-#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300)
-#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310)
-#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340)
-#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350)
-#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400)
-#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410)
-#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840)
-#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40)
-
-/* SMX-APE */
-#define SMX_APE_BASE 0x68000000
-#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000)
-#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400)
-#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800)
-#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00)
-
-/* IVA2 */
-#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000)
-
-/*
- * The 2430's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP243X)
-
-/* GPMC */
-/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */
-# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */
-#define CFG_FLASH_BASE H4_CS1_BASE
-#define DEBUG_BASE 0x08000000
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-#endif /* endif CONFIG_2430SDP */
-
-#endif
-
diff --git a/uart-loader/include/asm/arch-arm1136/sizes.h b/uart-loader/include/asm/arch-arm1136/sizes.h
deleted file mode 100644
index 3dddd8e..0000000
--- a/uart-loader/include/asm/arch-arm1136/sizes.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_31M 0x01F00000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif /* __sizes_h */
-
diff --git a/uart-loader/include/asm/arch-arm1136/sys_info.h b/uart-loader/include/asm/arch-arm1136/sys_info.h
deleted file mode 100644
index 94a09cd..0000000
--- a/uart-loader/include/asm/arch-arm1136/sys_info.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright 2005 (C) Texas Instruments, <www.ti.com>
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-#if 0
-typedef struct h4_system_data {
- /* base board info */
- u32 base_b_rev; /* rev from base board i2c */
- /* cpu board info */
- u32 cpu_b_rev; /* rev from cpu board i2c */
- u32 cpu_b_mux; /* mux type on daughter board */
- u32 cpu_b_ddr_type; /* mem type */
- u32 cpu_b_ddr_speed; /* ddr speed rating */
- u32 cpu_b_switches; /* boot ctrl switch settings */
- /* cpu info */
- u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
- u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#endif
-
-#define XDR_POP 5 /* package on package part */
-#define SDR_DISCRETE 4 /* 128M memory SDR module*/
-#define DDR_STACKED 3 /* stacked part on 2422 */
-#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_2420 0x2420
-#define CPU_2422 0x2422 /* 2420 + 64M stacked */
-#define CPU_2423 0x2423 /* 2420 + 96M stacked */
-#define CPU_2430 0x2430
-
-/* 242x real hardware:
- * ES1 = rev 0
- * ES2 = rev 1
- * ES2.05 = rev 2
- * ES2.1 = rev 3
- * ES2.1.1 = rev 4
- */
-
-/* 242x code defines:
- * ES1 = 0+1 = 1
- * ES2 = 1+1 = 2
- * ES2.05 = 2+1 = 3
- * ES2.1 = 3+1 = 4
- * Es2.1.1 = 4+1 = 5
- */
-#define CPU_2422_ES1 1
-#define CPU_2422_ES2 2
-#define CPU_2422_ES2_05 3
-#define CPU_2422_ES2_1 4
-#define CPU_2422_ES2_1_1 5
-
-#define CPU_2420_ES1 1
-#define CPU_2420_ES2 2
-#define CPU_2420_ES2_05 3
-#define CPU_2420_ES2_1 4
-#define CPU_2420_ES2_1_1 5
-
-#define CPU_242X_ES1 1
-#define CPU_242X_ES2 2
-#define CPU_242X_ES2_05 3
-#define CPU_242X_ES2_1 4
-#define CPU_242X_ES2_1_1 5
-
-#define CPU_2420_2422_ES1 1
-#define CPU_2420_2422_ES2_1 4
-
-/* 243x real hardware:
- * ES1 = rev 0
- * ES2 = rev 1
- *
- * 243x code defines:
- * ES1 = 0+1 = 1
- * ES2 = 1+1 = 2
- */
-#define CPU_2430_ES1 1
-#define CPU_2430_ES2 2
-
-#ifdef VPOM2430
-# define CPU_2430_VIRTIO 3
-#else
-# define CPU_2430_VIRTIO 1
-#endif
-#define CPU_2430_ZEBU 0xD
-
-#define CPU_2420_CHIPID 0x0B5D9000
-#define CPU_2430_CHIPID 0x0B68A000
-#define CPU_24XX_ID_MASK 0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP 2
-#define BOARD_H4_MENELAUS_HRP 3
-#define BOARD_SDP_2430 4
-
-#define GPMC_MUXED 1
-#define GPMC_NONMUXED 0
-
-#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
-#define TYPE_NOR 0x000
-#define TYPE_ONENAND 0x800
-
-#define WIDTH_8BIT 0x0000
-#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
-
-#endif
diff --git a/uart-loader/include/asm/arch-arm926ejs/sizes.h b/uart-loader/include/asm/arch-arm926ejs/sizes.h
deleted file mode 100644
index ef0b99b..0000000
--- a/uart-loader/include/asm/arch-arm926ejs/sizes.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307
- * USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif /* __sizes_h */
diff --git a/uart-loader/include/asm/arch-omap3/bits.h b/uart-loader/include/asm/arch-omap3/bits.h
deleted file mode 120000
index 036fe66..0000000
--- a/uart-loader/include/asm/arch-omap3/bits.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/bits.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/clocks.h b/uart-loader/include/asm/arch-omap3/clocks.h
deleted file mode 120000
index 894fadf..0000000
--- a/uart-loader/include/asm/arch-omap3/clocks.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/clocks.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/clocks343x.h b/uart-loader/include/asm/arch-omap3/clocks343x.h
deleted file mode 120000
index 92f7376..0000000
--- a/uart-loader/include/asm/arch-omap3/clocks343x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/clocks343x.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/cpu.h b/uart-loader/include/asm/arch-omap3/cpu.h
deleted file mode 120000
index 5c88731..0000000
--- a/uart-loader/include/asm/arch-omap3/cpu.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/cpu.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S b/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S
deleted file mode 120000
index 803f515..0000000
--- a/uart-loader/include/asm/arch-omap3/dpll_table_34xx.S
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_34xx.S \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S b/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S
deleted file mode 120000
index e8f2f9b..0000000
--- a/uart-loader/include/asm/arch-omap3/dpll_table_36xx.S
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_36xx.S \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/mem.h b/uart-loader/include/asm/arch-omap3/mem.h
deleted file mode 120000
index b49b783..0000000
--- a/uart-loader/include/asm/arch-omap3/mem.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/mem.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/mmc.h b/uart-loader/include/asm/arch-omap3/mmc.h
deleted file mode 100644
index 7bceb5f..0000000
--- a/uart-loader/include/asm/arch-omap3/mmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * linux/drivers/mmc/mmc_pxa.h
- *
- * Author: Vladimir Shebordaev, Igor Oblakov
- * Copyright: MontaVista Software Inc.
- *
- * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __MMC_PXA_P_H__
-#define __MMC_PXA_P_H__
-
-/* PXA-250 MMC controller registers */
-
-/* MMC_STRPCL */
-#define MMC_STRPCL_STOP_CLK (0x0001UL)
-#define MMC_STRPCL_START_CLK (0x0002UL)
-
-/* MMC_STAT */
-
-#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN\
- | MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE \
- | MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR)
-
-/* MMC_CLKRT */
-#define MMC_CLKRT_20MHZ (0x0000UL)
-#define MMC_CLKRT_10MHZ (0x0001UL)
-#define MMC_CLKRT_5MHZ (0x0002UL)
-#define MMC_CLKRT_2_5MHZ (0x0003UL)
-#define MMC_CLKRT_1_25MHZ (0x0004UL)
-#define MMC_CLKRT_0_625MHZ (0x0005UL)
-#define MMC_CLKRT_0_3125MHZ (0x0006UL)
-
-/* MMC_SPI */
-#define MMC_SPI_DISABLE (0x00UL)
-#define MMC_SPI_EN (0x01UL)
-#define MMC_SPI_CS_EN (0x01UL << 2)
-#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
-#define MMC_SPI_CRC_ON (0x01UL << 1)
-
-/* MMC_CMDAT */
-#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
-#define MMC_CMDAT_INIT (0x0001UL << 6)
-#define MMC_CMDAT_BUSY (0x0001UL << 5)
-#define MMC_CMDAT_STREAM (0x0001UL << 4)
-#define MMC_CMDAT_BLOCK (0x0000UL << 4)
-#define MMC_CMDAT_WRITE (0x0001UL << 3)
-#define MMC_CMDAT_READ (0x0000UL << 3)
-#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
-#define MMC_CMDAT_R1 (0x0001UL)
-#define MMC_CMDAT_R2 (0x0002UL)
-#define MMC_CMDAT_R3 (0x0003UL)
-
-/* MMC_RESTO */
-#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
-
-/* MMC_RDTO */
-#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
-
-/* MMC_BLKLEN */
-#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
-
-/* MMC_PRTBUF */
-#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
-#define MMC_PRTBUF_BUF_FULL (0x00UL)
-
-/* MMC_I_MASK */
-#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
-#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
-#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
-#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_MASK_ALL (0x07fUL)
-
-
-/* MMC_I_REG */
-#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_REG_STOP_CMD (0x01UL << 3)
-#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
-#define MMC_I_REG_PRG_DONE (0x01UL << 1)
-#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_REG_ALL (0x007fUL)
-
-/* MMC_CMD */
-#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
-#define CMD(x) (x)
-
-#define MMC_DEFAULT_RCA 1
-
-#define MMC_BLOCK_SIZE 512
-#define MMC_CMD_RESET 0
-#define MMC_CMD_SEND_OP_COND 1
-#define MMC_CMD_ALL_SEND_CID 2
-#define MMC_CMD_SET_RCA 3
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_SEND_CID 10
-#define MMC_CMD_SEND_STATUS 13
-#define MMC_CMD_SET_BLOCKLEN 16
-#define MMC_CMD_READ_BLOCK 17
-#define MMC_CMD_RD_BLK_MULTI 18
-#define MMC_CMD_WRITE_BLOCK 24
-
-#define MMC_MAX_BLOCK_SIZE 512
-
-#define MMC_R1_IDLE_STATE 0x01
-#define MMC_R1_ERASE_STATE 0x02
-#define MMC_R1_ILLEGAL_CMD 0x04
-#define MMC_R1_COM_CRC_ERR 0x08
-#define MMC_R1_ERASE_SEQ_ERR 0x01
-#define MMC_R1_ADDR_ERR 0x02
-#define MMC_R1_PARAM_ERR 0x04
-
-#define MMC_R1B_WP_ERASE_SKIP 0x0002
-#define MMC_R1B_ERR 0x0004
-#define MMC_R1B_CC_ERR 0x0008
-#define MMC_R1B_CARD_ECC_ERR 0x0010
-#define MMC_R1B_WP_VIOLATION 0x0020
-#define MMC_R1B_ERASE_PARAM 0x0040
-#define MMC_R1B_OOR 0x0080
-#define MMC_R1B_IDLE_STATE 0x0100
-#define MMC_R1B_ERASE_RESET 0x0200
-#define MMC_R1B_ILLEGAL_CMD 0x0400
-#define MMC_R1B_COM_CRC_ERR 0x0800
-#define MMC_R1B_ERASE_SEQ_ERR 0x1000
-#define MMC_R1B_ADDR_ERR 0x2000
-#define MMC_R1B_PARAM_ERR 0x4000
-
-typedef struct mmc_cid {
-/* FIXME: BYTE_ORDER */
- unsigned char year:4,
- month:4;
- unsigned char sn[3];
- unsigned char fwrev:4,
- hwrev:4;
- unsigned char name[6];
- unsigned char id[3];
-} mmc_cid_t;
-
-typedef struct mmc_csd
-{
- unsigned char ecc:2,
- file_format:2,
- tmp_write_protect:1,
- perm_write_protect:1,
- copy:1,
- file_format_grp:1;
- unsigned long int content_prot_app:1,
- rsvd3:4,
- write_bl_partial:1,
- write_bl_len:4,
- r2w_factor:3,
- default_ecc:2,
- wp_grp_enable:1,
- wp_grp_size:5,
- erase_grp_mult:5,
- erase_grp_size:5,
- c_size_mult1:3,
- vdd_w_curr_max:3,
- vdd_w_curr_min:3,
- vdd_r_curr_max:3,
- vdd_r_curr_min:3,
- c_size:12,
- rsvd2:2,
- dsr_imp:1,
- read_blk_misalign:1,
- write_blk_misalign:1,
- read_bl_partial:1;
-
- unsigned short read_bl_len:4,
- ccc:12;
- unsigned char tran_speed;
- unsigned char nsac;
- unsigned char taac;
- unsigned char rsvd1:2,
- spec_vers:4,
- csd_structure:2;
-} mmc_csd_t;
-
-
-#endif /* __MMC_PXA_P_H__ */
diff --git a/uart-loader/include/asm/arch-omap3/mux.h b/uart-loader/include/asm/arch-omap3/mux.h
deleted file mode 120000
index a745fbd..0000000
--- a/uart-loader/include/asm/arch-omap3/mux.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/mux.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/omap3430.h b/uart-loader/include/asm/arch-omap3/omap3430.h
deleted file mode 120000
index 69502f2..0000000
--- a/uart-loader/include/asm/arch-omap3/omap3430.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/omap3430.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/rev.h b/uart-loader/include/asm/arch-omap3/rev.h
deleted file mode 120000
index 66918c9..0000000
--- a/uart-loader/include/asm/arch-omap3/rev.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/rev.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/sizes.h b/uart-loader/include/asm/arch-omap3/sizes.h
deleted file mode 120000
index 4eda715..0000000
--- a/uart-loader/include/asm/arch-omap3/sizes.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sizes.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/sys_info.h b/uart-loader/include/asm/arch-omap3/sys_info.h
deleted file mode 120000
index 2e4d1d0..0000000
--- a/uart-loader/include/asm/arch-omap3/sys_info.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sys_info.h \ No newline at end of file
diff --git a/uart-loader/include/asm/arch-omap3/sys_proto.h b/uart-loader/include/asm/arch-omap3/sys_proto.h
deleted file mode 120000
index 3a032c8..0000000
--- a/uart-loader/include/asm/arch-omap3/sys_proto.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sys_proto.h \ No newline at end of file
diff --git a/uart-loader/include/asm/atomic.h b/uart-loader/include/asm/atomic.h
deleted file mode 100644
index ba9e4b7..0000000
--- a/uart-loader/include/asm/atomic.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/include/asm-arm/atomic.h
- *
- * Copyright (c) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 27-06-1996 RMK Created
- * 13-04-1997 RMK Made functions atomic!
- * 07-12-1997 RMK Upgraded for v2.1.
- * 26-08-1998 PJB Added #ifdef __KERNEL__
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#include <linux/config.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i) { (i) }
-
-#ifdef __KERNEL__
-#include <asm/proc/system.h>
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-static inline void atomic_add(int i, volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter += i;
- local_irq_restore(flags);
-}
-
-static inline void atomic_sub(int i, volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter -= i;
- local_irq_restore(flags);
-}
-
-static inline void atomic_inc(volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter += 1;
- local_irq_restore(flags);
-}
-
-static inline void atomic_dec(volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter -= 1;
- local_irq_restore(flags);
-}
-
-static inline int atomic_dec_and_test(volatile atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val -= 1;
- local_irq_restore(flags);
-
- return val == 0;
-}
-
-static inline int atomic_add_negative(int i, volatile atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val += i;
- local_irq_restore(flags);
-
- return val < 0;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- *addr &= ~mask;
- local_irq_restore(flags);
-}
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif
-#endif
diff --git a/uart-loader/include/asm/byteorder.h b/uart-loader/include/asm/byteorder.h
deleted file mode 120000
index be6afe8..0000000
--- a/uart-loader/include/asm/byteorder.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/asm-arm/byteorder.h \ No newline at end of file
diff --git a/uart-loader/include/asm/posix_types.h b/uart-loader/include/asm/posix_types.h
deleted file mode 100644
index c412486..0000000
--- a/uart-loader/include/asm/posix_types.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/include/asm-arm/posix_types.h
- *
- * Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 27-06-1996 RMK Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_dev_t;
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(fd, fdsetp) \
- (((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31)))
-
-#undef __FD_CLR
-#define __FD_CLR(fd, fdsetp) \
- (((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31)))
-
-#undef __FD_ISSET
-#define __FD_ISSET(fd, fdsetp) \
- ((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0)
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) \
- (memset (fdsetp, 0, sizeof (*(fd_set *)fdsetp)))
-
-#endif
-
-#endif
diff --git a/uart-loader/include/asm/setup.h b/uart-loader/include/asm/setup.h
deleted file mode 100644
index 89df4dc..0000000
--- a/uart-loader/include/asm/setup.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * linux/include/asm/setup.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Structure passed to kernel to tell it about the
- * hardware it's running on. See linux/Documentation/arm/Setup
- * for more info.
- *
- * NOTE:
- * This file contains two ways to pass information from the boot
- * loader to the kernel. The old struct param_struct is deprecated,
- * but it will be kept in the kernel for 5 years from now
- * (2001). This will allow boot loaders to convert to the new struct
- * tag way.
- */
-#ifndef __ASMARM_SETUP_H
-#define __ASMARM_SETUP_H
-
-/*
- * Usage:
- * - do not go blindly adding fields, add them at the end
- * - when adding fields, don't rely on the address until
- * a patch from me has been released
- * - unused fields should be zero (for future expansion)
- * - this structure is relatively short-lived - only
- * guaranteed to contain useful data in setup_arch()
- */
-#define COMMAND_LINE_SIZE 1024
-
-/* This is the old deprecated way to pass parameters to the kernel */
-struct param_struct {
- union {
- struct {
- unsigned long page_size; /* 0 */
- unsigned long nr_pages; /* 4 */
- unsigned long ramdisk_size; /* 8 */
- unsigned long flags; /* 12 */
-#define FLAG_READONLY 1
-#define FLAG_RDLOAD 4
-#define FLAG_RDPROMPT 8
- unsigned long rootdev; /* 16 */
- unsigned long video_num_cols; /* 20 */
- unsigned long video_num_rows; /* 24 */
- unsigned long video_x; /* 28 */
- unsigned long video_y; /* 32 */
- unsigned long memc_control_reg; /* 36 */
- unsigned char sounddefault; /* 40 */
- unsigned char adfsdrives; /* 41 */
- unsigned char bytes_per_char_h; /* 42 */
- unsigned char bytes_per_char_v; /* 43 */
- unsigned long pages_in_bank[4]; /* 44 */
- unsigned long pages_in_vram; /* 60 */
- unsigned long initrd_start; /* 64 */
- unsigned long initrd_size; /* 68 */
- unsigned long rd_start; /* 72 */
- unsigned long system_rev; /* 76 */
- unsigned long system_serial_low; /* 80 */
- unsigned long system_serial_high; /* 84 */
- unsigned long mem_fclk_21285; /* 88 */
- } s;
- char unused[256];
- } u1;
- union {
- char paths[8][128];
- struct {
- unsigned long magic;
- char n[1024 - sizeof(unsigned long)];
- } s;
- } u2;
- char commandline[COMMAND_LINE_SIZE];
-};
-
-
-/*
- * The new way of passing information: a list of tagged entries
- */
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE 0x00000000
-
-struct tag_header {
- u32 size;
- u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE 0x54410001
-
-struct tag_core {
- u32 flags; /* bit 0 = read-only */
- u32 pagesize;
- u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM 0x54410002
-
-struct tag_mem32 {
- u32 size;
- u32 start; /* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT 0x54410003
-
-struct tag_videotext {
- u8 x;
- u8 y;
- u16 video_page;
- u8 video_mode;
- u8 video_cols;
- u16 video_ega_bx;
- u8 video_lines;
- u8 video_isvga;
- u16 video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK 0x54410004
-
-struct tag_ramdisk {
- u32 flags; /* bit 0 = load, bit 1 = prompt */
- u32 size; /* decompressed ramdisk size in _kilo_ bytes */
- u32 start; /* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * its depreciated.
- */
-#define ATAG_INITRD 0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2 0x54420005
-
-struct tag_initrd {
- u32 start; /* physical start address */
- u32 size; /* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL 0x54410006
-
-struct tag_serialnr {
- u32 low;
- u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION 0x54410007
-
-struct tag_revision {
- u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB 0x54410008
-
-struct tag_videolfb {
- u16 lfb_width;
- u16 lfb_height;
- u16 lfb_depth;
- u16 lfb_linelength;
- u32 lfb_base;
- u32 lfb_size;
- u8 red_size;
- u8 red_pos;
- u8 green_size;
- u8 green_pos;
- u8 blue_size;
- u8 blue_pos;
- u8 rsvd_size;
- u8 rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE 0x54410009
-
-struct tag_cmdline {
- char cmdline[1]; /* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN 0x41000101
-
-struct tag_acorn {
- u32 memc_control_reg;
- u32 vram_pages;
- u8 sounddefault;
- u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK 0x41000402
-
-struct tag_memclk {
- u32 fmemclk;
-};
-
-struct tag {
- struct tag_header hdr;
- union {
- struct tag_core core;
- struct tag_mem32 mem;
- struct tag_videotext videotext;
- struct tag_ramdisk ramdisk;
- struct tag_initrd initrd;
- struct tag_serialnr serialnr;
- struct tag_revision revision;
- struct tag_videolfb videolfb;
- struct tag_cmdline cmdline;
-
- /*
- * Acorn specific
- */
- struct tag_acorn acorn;
-
- /*
- * DC21285 specific
- */
- struct tag_memclk memclk;
- } u;
-};
-
-struct tagtable {
- u32 tag;
- int (*parse)(const struct tag *);
-};
-
-#define __tag __attribute__((unused, __section__(".taglist")))
-#define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-#define tag_member_present(tag,member) \
- ((unsigned long)(&((struct tag *)0L)->member + 1) \
- <= (tag)->hdr.size * 4)
-
-#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
-
-/*
- * Memory map description
- */
-#define NR_BANKS 8
-
-struct meminfo {
- int nr_banks;
- unsigned long end;
- struct {
- unsigned long start;
- unsigned long size;
- int node;
- } bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#endif
diff --git a/uart-loader/include/asm/sizes.h b/uart-loader/include/asm/sizes.h
deleted file mode 100644
index f8d92ca..0000000
--- a/uart-loader/include/asm/sizes.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
diff --git a/uart-loader/include/asm/string.h b/uart-loader/include/asm/string.h
deleted file mode 100644
index c3ea582..0000000
--- a/uart-loader/include/asm/string.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __ASM_ARM_STRING_H
-#define __ASM_ARM_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#undef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#undef __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#undef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMZERO
-#undef __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-#if 0
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n) \
- ({ \
- if ((n) != 0) { \
- if (__builtin_constant_p((v)) && (v) == 0) \
- __memzero((p),(n)); \
- else \
- memset((p),(v),(n)); \
- } \
- (p); \
- })
-
-#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
-#else
-extern void memzero(void *ptr, __kernel_size_t n);
-#endif
-
-#endif
diff --git a/uart-loader/include/asm/types.h b/uart-loader/include/asm/types.h
deleted file mode 100644
index 13e9806..0000000
--- a/uart-loader/include/asm/types.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/uart-loader/include/asm/x-load-arm.h b/uart-loader/include/asm/x-load-arm.h
deleted file mode 100644
index eef268e..0000000
--- a/uart-loader/include/asm/x-load-arm.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _X_LOAD_ARM_H_
-#define _X_LOAD_ARM_H_ 1
-
-/* for the following variables, see start.S */
-extern ulong _armboot_start; /* code start */
-extern ulong _bss_start; /* code + data end == BSS start */
-extern ulong _bss_end; /* BSS end */
-
-#endif /* _X_LOAD_ARM_H_ */
diff --git a/uart-loader/include/command.h b/uart-loader/include/command.h
deleted file mode 120000
index f4bd05e..0000000
--- a/uart-loader/include/command.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/command.h \ No newline at end of file
diff --git a/uart-loader/include/common.h b/uart-loader/include/common.h
deleted file mode 100644
index fe8bc90..0000000
--- a/uart-loader/include/common.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __COMMON_H_
-#define __COMMON_H_ 1
-
-#undef _LINUX_CONFIG_H
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-typedef unsigned char uchar;
-typedef volatile unsigned long vu_long;
-typedef volatile unsigned short vu_short;
-typedef volatile unsigned char vu_char;
-
-#include <config.h>
-#include <linux/types.h>
-#include <stdarg.h>
-
-#ifdef CONFIG_ARM
-#define asmlinkage /* nothing */
-#endif
-
-
-#ifdef CONFIG_ARM
-# include <asm/setup.h>
-# include <asm/x-load-arm.h> /* ARM version to be fixed! */
-#endif /* CONFIG_ARM */
-
-#ifdef CFG_PRINTF
-#define printf(fmt,args...) serial_printf (fmt ,##args)
-#define getc() serial_getc()
-#else
-#define printf(fmt,args...)
-#define getc() ' '
-#endif /* CFG_PRINTF */
-
-/* board/$(BOARD)/$(BOARD).c */
-int board_init (void);
-int nand_init (void);
-int mmc_boot (void);
-void board_hang (void);
-
-/* cpu/$(CPU)/cpu.c */
-int cpu_init (void);
-#ifdef CFG_UDELAY
-void udelay (unsigned long usec);
-#endif
-
-/* nand driver */
-#define NAND_CMD_READ0 0
-#define NAND_CMD_READ1 1
-#define NAND_CMD_READOOB 0x50
-#define NAND_CMD_STATUS 0x70
-#define NAND_CMD_READID 0x90
-#define NAND_CMD_RESET 0xff
-
-/* Extended Commands for Large page devices */
-#define NAND_CMD_READSTART 0x30
-
-int nand_chip(void);
-int nand_read_block(uchar *buf, ulong block_addr);
-
-int onenand_chip(void);
-int onenand_read_block(unsigned char *buf, ulong block);
-
-
-#ifdef CFG_PRINTF
-
-/* serial driver */
-int serial_init (void);
-void serial_setbrg (void);
-void serial_putc (const char);
-void serial_puts (const char *);
-int serial_getc (void);
-int serial_tstc (void);
-
-/* lib/printf.c */
-void serial_printf (const char *fmt, ...);
-#endif
-
-/* lib/crc.c */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-
-/* lib/board.c */
-void hang (void) __attribute__ ((noreturn));
-#endif /* __COMMON_H_ */
diff --git a/uart-loader/include/configs/omap3430labrador.h b/uart-loader/include/configs/omap3430labrador.h
deleted file mode 100644
index 53b72f1..0000000
--- a/uart-loader/include/configs/omap3430labrador.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * (C) Copyright 2006
- * Texas Instruments <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * X-Loader Configuation settings for the TI OMAP SDP3430 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* configure for GTA04 with DM3730 */
-#define CONFIG_OMAP36XX 1 /* or 36XX (DM3730) */
-#define PRCM_CLK_CFG2_400MHZ 1
-
-/* serial printf facility takes about 3.5K */
-#define CFG_PRINTF
-//#undef CFG_PRINTF
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP34XX 1 /* which is a 34XX */
-#define CONFIG_OMAP3430 1 /* which is in a 3430 */
-#define CONFIG_3430LABRADOR 1 /* working on Labrador */
-//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
-//#define CFG_UDELAY
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
-//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */
-#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */
-#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */
-
-/* Memory type */
-#define CFG_3430SDRAM_DDR 1
-
-/* The actual register values are defined in u-boot- mem.h */
-/* SDRAM Bank Allocation method */
-//#define SDRC_B_R_C 1
-//#define SDRC_B1_R_B0_C 1
-#define SDRC_R_B_C 1
-
-/* Boot type */
-#define CFG_NAND 1
-//#define CFG_ONENAND 1
-
-# define NAND_BASE_ADR NAND_BASE /* NAND flash */
-# define ONENAND_BASE ONENAND_MAP /* OneNand flash */
-
-/* To use the 256/512 byte s/w ecc define CFG_SW_ECC_(256/512) */
-/* Use the 512 byte hw ecc in rom code layout */
-#define NAND_HW_ROMCODE_ECC_LAYOUT
-
-#ifdef CFG_NAND
-#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M /* u = ofdon't need so much for nand port */
-#define OMAP34XX_GPMC_CS0_MAP NAND_BASE_ADR
-#else
-#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M
-#define OMAP34XX_GPMC_CS0_MAP ONENAND_BASE
-#define ONENAND_ADDR ONENAND_BASE /* physical address of OneNAND at CS0*/
-#endif
-
-
-#ifdef CFG_PRINTF
-
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK (48000000)
-#define CFG_NS16550_COM3 OMAP34XX_UART3
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL3 3 /* UART3 on board */
-#define CONFIG_CONS_INDEX 3
-
-#define CONFIG_BAUDRATE 115200
-#define CFG_PBSIZE 256
-
-#endif /* CFG_PRINTF */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LOADADDR 0x80008000
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-
-#ifdef CFG_NAND
-
-/*-----------------------------------------------------------------------
- * Board NAND Info.
- */
-
-
-#define CFG_NAND_K9F1G08R0A /* Micron 16-bit 256MB chip large page NAND chip*/
-#define NAND_16BIT
-
-/* NAND is partitioned:
- * 0x00000000 - 0x0007FFFF Booting Image
- * 0x00080000 - 0x000BFFFF U-Boot Image
- * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care)
- * 0x00100000 - 0x002FFFFF Kernel Image
- * 0x00300000 - 0x08000000 depends on application
- */
-#define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */
-#define NAND_UBOOT_END 0x00C0000 /* Giving a space of 2 blocks = 256KB */
-#define NAND_BLOCK_SIZE 0x20000
-
-#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50)
-#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C)
-#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80)
-#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84)
-
-#ifdef NAND_16BIT
-#define WRITE_NAND_COMMAND(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d;} while(0)
-#define WRITE_NAND(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_DATA_0 = d;} while(0)
-#define READ_NAND(adr) \
- (*(volatile u16 *)GPMC_NAND_DATA_0)
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF() \
- do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0)
-#define NAND_WP_ON() \
- do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0)
-
-#else /* to support 8-bit NAND devices */
-#define WRITE_NAND_COMMAND(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d;} while(0)
-#define WRITE_NAND(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_DATA_0 = d;} while(0)
-#define READ_NAND(adr) \
- (*(volatile u8 *)GPMC_NAND_DATA_0);
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF() \
- do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0)
-#define NAND_WP_ON() \
- do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0)
-
-#endif
-
-#define NAND_CTL_CLRALE(adr)
-#define NAND_CTL_SETALE(adr)
-#define NAND_CTL_CLRCLE(adr)
-#define NAND_CTL_SETCLE(adr)
-#define NAND_DISABLE_CE()
-#define NAND_ENABLE_CE()
-
-#else
-/*-----------------------------------------------------------------------
- * Board oneNAND Info.
- */
-#define CFG_SYNC_BURST_READ 1
-
-/* OneNAND is partitioned:
- * 0x0000000 - 0x0080000 X-Loader
- * 0x0080000 - 0x00c0000 U-boot Image
- * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care)
- * 0x00e0000 - 0x0120000 Kernel Image
- * 0x0120000 - 0x4000000 depends on application
- */
-
-#define ONENAND_START_BLOCK 4
-#define ONENAND_END_BLOCK 6
-#define ONENAND_PAGE_SIZE 2048 /* 2KB */
-#define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */
-
-#endif /* oneNAND */
-
-/* Enable CONFIG_MMC macro if MMC boot support is required */
-/* if loadb and MMC support are enabled together, the size of x-loader
- (code + data) becomes greater than 32K - the size of SRAM. So don't enable
- them together.
- */
-#if !defined(START_LOADB_DOWNLOAD)
-#define CONFIG_MMC 1
-#endif
-#if defined(CONFIG_MMC)
- #define CFG_CMD_MMC 1
- #define CFG_CMD_FAT 1
-#endif
-
-#endif /* __CONFIG_H */
-
diff --git a/uart-loader/include/fat.h b/uart-loader/include/fat.h
deleted file mode 120000
index aeeb5a0..0000000
--- a/uart-loader/include/fat.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/fat.h \ No newline at end of file
diff --git a/uart-loader/include/ide.h b/uart-loader/include/ide.h
deleted file mode 120000
index 9c84a17..0000000
--- a/uart-loader/include/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/ide.h \ No newline at end of file
diff --git a/uart-loader/include/linux/byteorder b/uart-loader/include/linux/byteorder
deleted file mode 120000
index f000c3b..0000000
--- a/uart-loader/include/linux/byteorder
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/byteorder \ No newline at end of file
diff --git a/uart-loader/include/linux/config.h b/uart-loader/include/linux/config.h
deleted file mode 100644
index a0194cb..0000000
--- a/uart-loader/include/linux/config.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_CONFIG_H
-#define _LINUX_CONFIG_H
-
-/* #include <linux/autoconf.h> */
-
-#endif
diff --git a/uart-loader/include/linux/posix_types.h b/uart-loader/include/linux/posix_types.h
deleted file mode 100644
index bd37e1f..0000000
--- a/uart-loader/include/linux/posix_types.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LINUX_POSIX_TYPES_H
-#define _LINUX_POSIX_TYPES_H
-
-#include <linux/stddef.h>
-
-/*
- * This allows for 1024 file descriptors: if NR_OPEN is ever grown
- * beyond that you'll have to change this too. But 1024 fd's seem to be
- * enough even for such "real" unices like OSF/1, so hopefully this is
- * one limit that doesn't have to be changed [again].
- *
- * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
- * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
- * place for them. Solved by having dummy defines in <sys/time.h>.
- */
-
-/*
- * Those macros may have been defined in <gnu/types.h>. But we always
- * use the ones here.
- */
-#undef __NFDBITS
-#define __NFDBITS (8 * sizeof(unsigned long))
-
-#undef __FD_SETSIZE
-#define __FD_SETSIZE 1024
-
-#undef __FDSET_LONGS
-#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS)
-
-#undef __FDELT
-#define __FDELT(d) ((d) / __NFDBITS)
-
-#undef __FDMASK
-#define __FDMASK(d) (1UL << ((d) % __NFDBITS))
-
-typedef struct {
- unsigned long fds_bits [__FDSET_LONGS];
-} __kernel_fd_set;
-
-/* Type of a signal handler. */
-typedef void (*__kernel_sighandler_t)(int);
-
-/* Type of a SYSV IPC key. */
-typedef int __kernel_key_t;
-
-#include <asm/posix_types.h>
-
-#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/uart-loader/include/linux/stat.h b/uart-loader/include/linux/stat.h
deleted file mode 120000
index 3bc0369..0000000
--- a/uart-loader/include/linux/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/stat.h \ No newline at end of file
diff --git a/uart-loader/include/linux/stddef.h b/uart-loader/include/linux/stddef.h
deleted file mode 100644
index 81e34c2..0000000
--- a/uart-loader/include/linux/stddef.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _LINUX_STDDEF_H
-#define _LINUX_STDDEF_H
-
-#undef NULL
-#if defined(__cplusplus)
-#define NULL 0
-#else
-#define NULL ((void *)0)
-#endif
-
-#ifndef _SIZE_T
-#include <linux/types.h>
-#endif
-
-#undef offsetof
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-
-#endif
diff --git a/uart-loader/include/linux/time.h b/uart-loader/include/linux/time.h
deleted file mode 120000
index d630a65..0000000
--- a/uart-loader/include/linux/time.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/time.h \ No newline at end of file
diff --git a/uart-loader/include/linux/types.h b/uart-loader/include/linux/types.h
deleted file mode 100644
index df4808f..0000000
--- a/uart-loader/include/linux/types.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_TYPES_H
-#define _LINUX_TYPES_H
-
-#ifdef __KERNEL__
-#include <linux/config.h>
-#endif
-
-#include <linux/posix_types.h>
-#include <asm/types.h>
-
-#ifndef __KERNEL_STRICT_NAMES
-
-typedef __kernel_fd_set fd_set;
-typedef __kernel_dev_t dev_t;
-typedef __kernel_ino_t ino_t;
-typedef __kernel_mode_t mode_t;
-typedef __kernel_nlink_t nlink_t;
-typedef __kernel_off_t off_t;
-typedef __kernel_pid_t pid_t;
-typedef __kernel_daddr_t daddr_t;
-typedef __kernel_key_t key_t;
-typedef __kernel_suseconds_t suseconds_t;
-
-#ifdef __KERNEL__
-typedef __kernel_uid32_t uid_t;
-typedef __kernel_gid32_t gid_t;
-typedef __kernel_uid16_t uid16_t;
-typedef __kernel_gid16_t gid16_t;
-
-#ifdef CONFIG_UID16
-/* This is defined by include/asm-{arch}/posix_types.h */
-typedef __kernel_old_uid_t old_uid_t;
-typedef __kernel_old_gid_t old_gid_t;
-#endif /* CONFIG_UID16 */
-
-/* libc5 includes this file to define uid_t, thus uid_t can never change
- * when it is included by non-kernel code
- */
-#else
-typedef __kernel_uid_t uid_t;
-typedef __kernel_gid_t gid_t;
-#endif /* __KERNEL__ */
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __kernel_loff_t loff_t;
-#endif
-
-/*
- * The following typedefs are also protected by individual ifdefs for
- * historical reasons:
- */
-#ifndef _SIZE_T
-#define _SIZE_T
-typedef __kernel_size_t size_t;
-#endif
-
-#ifndef _SSIZE_T
-#define _SSIZE_T
-typedef __kernel_ssize_t ssize_t;
-#endif
-
-#ifndef _PTRDIFF_T
-#define _PTRDIFF_T
-typedef __kernel_ptrdiff_t ptrdiff_t;
-#endif
-
-#ifndef _TIME_T
-#define _TIME_T
-typedef __kernel_time_t time_t;
-#endif
-
-#ifndef _CLOCK_T
-#define _CLOCK_T
-typedef __kernel_clock_t clock_t;
-#endif
-
-#ifndef _CADDR_T
-#define _CADDR_T
-typedef __kernel_caddr_t caddr_t;
-#endif
-
-/* bsd */
-typedef unsigned char u_char;
-typedef unsigned short u_short;
-typedef unsigned int u_int;
-typedef unsigned long u_long;
-
-/* sysv */
-typedef unsigned char unchar;
-typedef unsigned short ushort;
-typedef unsigned int uint;
-typedef unsigned long ulong;
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-
-typedef __u8 u_int8_t;
-typedef __s8 int8_t;
-typedef __u16 u_int16_t;
-typedef __s16 int16_t;
-typedef __u32 u_int32_t;
-typedef __s32 int32_t;
-
-#endif /* !(__BIT_TYPES_DEFINED__) */
-
-typedef __u8 uint8_t;
-typedef __u16 uint16_t;
-typedef __u32 uint32_t;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __u64 uint64_t;
-typedef __u64 u_int64_t;
-typedef __s64 int64_t;
-#endif
-
-#endif /* __KERNEL_STRICT_NAMES */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
-struct ustat {
- __kernel_daddr_t f_tfree;
- __kernel_ino_t f_tinode;
- char f_fname[6];
- char f_fpack[6];
-};
-
-#endif /* _LINUX_TYPES_H */
diff --git a/uart-loader/include/malloc.h b/uart-loader/include/malloc.h
deleted file mode 120000
index 9e84013..0000000
--- a/uart-loader/include/malloc.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/malloc.h \ No newline at end of file
diff --git a/uart-loader/include/mmc.h b/uart-loader/include/mmc.h
deleted file mode 120000
index 1e59fb9..0000000
--- a/uart-loader/include/mmc.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/mmc.h \ No newline at end of file
diff --git a/uart-loader/include/ns16550.h b/uart-loader/include/ns16550.h
deleted file mode 100644
index 36d2d40..0000000
--- a/uart-loader/include/ns16550.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- */
-
-#if (CFG_NS16550_REG_SIZE == 1)
-struct NS16550 {
- unsigned char rbr; /* 0 */
- unsigned char ier; /* 1 */
- unsigned char fcr; /* 2 */
- unsigned char lcr; /* 3 */
- unsigned char mcr; /* 4 */
- unsigned char lsr; /* 5 */
- unsigned char msr; /* 6 */
- unsigned char scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 2)
-struct NS16550 {
- unsigned short rbr; /* 0 */
- unsigned short ier; /* 1 */
- unsigned short fcr; /* 2 */
- unsigned short lcr; /* 3 */
- unsigned short mcr; /* 4 */
- unsigned short lsr; /* 5 */
- unsigned short msr; /* 6 */
- unsigned short scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 4)
-struct NS16550 {
- unsigned long rbr; /* 0 */
- unsigned long ier; /* 1 */
- unsigned long fcr; /* 2 */
- unsigned long lcr; /* 3 */
- unsigned long mcr; /* 4 */
- unsigned long lsr; /* 5 */
- unsigned long msr; /* 6 */
- unsigned long scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == -4)
-struct NS16550 {
- unsigned char rbr; /* 0 */
- int pad1:24;
- unsigned char ier; /* 1 */
- int pad2:24;
- unsigned char fcr; /* 2 */
- int pad3:24;
- unsigned char lcr; /* 3 */
- int pad4:24;
- unsigned char mcr; /* 4 */
- int pad5:24;
- unsigned char lsr; /* 5 */
- int pad6:24;
- unsigned char msr; /* 6 */
- int pad7:24;
- unsigned char scr; /* 7 */
- int pad8:24;
-#if defined(CONFIG_OMAP)
- unsigned char mdr1; /* mode select reset TL16C750*/
-#endif
-#ifdef CONFIG_OMAP1510
- int pad9:24;
- unsigned long pad[10];
- unsigned char osc_12m_sel;
- int pad10:24;
-#endif
-} __attribute__ ((packed));
-#else
-#error "Please define NS16550 registers size."
-#endif
-
-#define thr rbr
-#define iir fcr
-#define dll rbr
-#define dlm ier
-
-typedef volatile struct NS16550 *NS16550_t;
-
-#define FCR_FIFO_EN 0x01 /* Fifo enable */
-#define FCR_RXSR 0x02 /* Receiver soft reset */
-#define FCR_TXSR 0x04 /* Transmitter soft reset */
-
-#define MCR_DTR 0x01
-#define MCR_RTS 0x02
-#define MCR_DMA_EN 0x04
-#define MCR_TX_DFR 0x08
-
-#define LCR_WLS_MSK 0x03 /* character length slect mask */
-#define LCR_WLS_5 0x00 /* 5 bit character length */
-#define LCR_WLS_6 0x01 /* 6 bit character length */
-#define LCR_WLS_7 0x02 /* 7 bit character length */
-#define LCR_WLS_8 0x03 /* 8 bit character length */
-#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN 0x08 /* Parity eneble */
-#define LCR_EPS 0x10 /* Even Parity Select */
-#define LCR_STKP 0x20 /* Stick Parity */
-#define LCR_SBRK 0x40 /* Set Break */
-#define LCR_BKSE 0x80 /* Bank select enable */
-
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
-
-#ifdef CONFIG_OMAP1510
-#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
-#endif
-
-/* useful defaults for LCR */
-#define LCR_8N1 0x03
-
-void NS16550_init (NS16550_t com_port, int baud_divisor);
-void NS16550_putc (NS16550_t com_port, char c);
-char NS16550_getc (NS16550_t com_port);
-int NS16550_tstc (NS16550_t com_port);
-void NS16550_reinit (NS16550_t com_port, int baud_divisor);
diff --git a/uart-loader/include/part.h b/uart-loader/include/part.h
deleted file mode 120000
index 766e417..0000000
--- a/uart-loader/include/part.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/part.h \ No newline at end of file
diff --git a/uart-loader/lib/Makefile b/uart-loader/lib/Makefile
deleted file mode 100644
index 341cd54..0000000
--- a/uart-loader/lib/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# (C) Copyright 2004 Texas Instruments
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(ARCH).a
-
-AOBJS = _udivsi3.o _umodsi3.o
-
-COBJS = board.o ecc_256.o ecc_512.o printf.o div0.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-loader/lib/_udivsi3.S b/uart-loader/lib/_udivsi3.S
deleted file mode 100644
index 2cdcd48..0000000
--- a/uart-loader/lib/_udivsi3.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-dividend .req r0
-divisor .req r1
-result .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .globl __udivsi3
- .type __udivsi3 ,function
- .align 0
- __udivsi3 :
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- mov result, #0
- cmp dividend, divisor
- bcc Lgot_result
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions, and note which bits
- @ are done in the result. On the final pass, this may subtract
- @ too much from the dividend, but the result will be ok, since the
- @ "bit" will have been shifted out at the bottom.
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- orrcs result, result, curbit
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs result, result, curbit, lsr #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs result, result, curbit, lsr #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs result, result, curbit, lsr #3
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
-Lgot_result:
- mov r0, result
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __udivsi3 , . - __udivsi3
-/* # 235 "libgcc1.S" */
-/* # 320 "libgcc1.S" */
-/* # 421 "libgcc1.S" */
-/* # 433 "libgcc1.S" */
-/* # 456 "libgcc1.S" */
-/* # 500 "libgcc1.S" */
-/* # 580 "libgcc1.S" */
diff --git a/uart-loader/lib/_umodsi3.S b/uart-loader/lib/_umodsi3.S
deleted file mode 100644
index e4aebe8..0000000
--- a/uart-loader/lib/_umodsi3.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-/* # 145 "libgcc1.S" */
-dividend .req r0
-divisor .req r1
-overdone .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .globl __umodsi3
- .type __umodsi3 ,function
- .align 0
- __umodsi3 :
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- cmp dividend, divisor
- movcc pc, lr
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions. On the final pass, this may
- @ subtract too much from the dividend, so keep track of which
- @ subtractions are done, we can fix them up afterwards...
- mov overdone, #0
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs overdone, overdone, curbit, ror #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs overdone, overdone, curbit, ror #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs overdone, overdone, curbit, ror #3
- mov ip, curbit
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
- @ Any subtractions that we should not have done will be recorded in
- @ the top three bits of "overdone". Exactly which were not needed
- @ are governed by the position of the bit, stored in ip.
- @ If we terminated early, because dividend became zero,
- @ then none of the below will match, since the bit in ip will not be
- @ in the bottom nibble.
- ands overdone, overdone, #0xe0000000
- moveq pc, lr @ No fixups needed
- tst overdone, ip, ror #3
- addne dividend, dividend, divisor, lsr #3
- tst overdone, ip, ror #2
- addne dividend, dividend, divisor, lsr #2
- tst overdone, ip, ror #1
- addne dividend, dividend, divisor, lsr #1
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __umodsi3 , . - __umodsi3
-/* # 320 "libgcc1.S" */
-/* # 421 "libgcc1.S" */
-/* # 433 "libgcc1.S" */
-/* # 456 "libgcc1.S" */
-/* # 500 "libgcc1.S" */
-/* # 580 "libgcc1.S" */
diff --git a/uart-loader/lib/board.c b/uart-loader/lib/board.c
deleted file mode 100644
index 535f7eb..0000000
--- a/uart-loader/lib/board.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * Copyright (C) 2005 Texas Instruments.
- *
- * (C) Copyright 2004
- * Jian Zhang, Texas Instruments, jzhang@ti.com.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <part.h>
-#include <fat.h>
-#include <mmc.h>
-
-#ifdef CFG_PRINTF
-int print_info(void)
-{
- printf ("\n\nTexas Instruments X-Loader 1.41 ("
- __DATE__ " - " __TIME__ ")\n");
- return 0;
-}
-#endif
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
- cpu_init, /* basic cpu dependent setup */
- board_init, /* basic board dependent setup */
-#ifdef CFG_PRINTF
- serial_init, /* serial communications setup */
- print_info,
-#endif
- nand_init, /* board specific nand init */
- NULL,
-};
-
-#ifdef CFG_CMD_FAT
-extern char * strcpy(char * dest,const char *src);
-#else
-char * strcpy(char * dest,const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-#endif
-
-#ifdef CONFIG_MMC
-int mmc_read_bootloader(int dev, int part)
-{
- long size;
- unsigned long offset = CFG_LOADADDR;
- block_dev_desc_t *dev_desc = NULL;
- unsigned char ret = 0;
-
- ret = mmc_init(dev);
- if (ret != 0){
- printf("\n MMC init failed \n");
- return -1;
- }
-
- if (part) { /* FAT Read for extenal SD card */
- dev_desc = mmc_get_dev(dev);
- size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0);
- if (size == -1)
- return -1;
- } else { /* RAW read for EMMC */
- ret = mmc_read(dev, 0x400, (unsigned char *)offset, 0x60000);
- if (ret != 1)
- return -1;
- }
-
- return 0;
-}
-#endif
-
-extern int do_load_serial_bin(ulong offset, int baudrate);
-extern int do_comand_line(void);
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-void start_armboot (void)
-{
- init_fnc_t **init_fnc_ptr;
- int i;
- uchar *buf;
- char boot_dev_name[8];
- u32 boot_device = 0;
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0) {
- hang ();
- }
- }
-#ifdef START_LOADB_DOWNLOAD
- strcpy(boot_dev_name, "UART");
- do_load_serial_bin (CFG_LOADADDR, 115200);
- do_comand_line();
-#else // START_LOADB_DOWNLOAD
- /* Read boot device from saved scratch pad */
- boot_device = __raw_readl(0x480029c0) & 0xff;
- buf = (uchar*) CFG_LOADADDR;
-
- switch(boot_device) {
- case 0x03:
- strcpy(boot_dev_name, "ONENAND");
-#if defined(CFG_ONENAND)
- for (i = ONENAND_START_BLOCK; i < ONENAND_END_BLOCK; i++) {
- if (!onenand_read_block(buf, i))
- buf += ONENAND_BLOCK_SIZE;
- else
- goto error;
- }
-#endif
- break;
- case 0x02:
- default:
- strcpy(boot_dev_name, "NAND");
-#if defined(CFG_NAND)
- for (i = NAND_UBOOT_START; i < NAND_UBOOT_END;
- i+= NAND_BLOCK_SIZE) {
- if (!nand_read_block(buf, i))
- buf += NAND_BLOCK_SIZE; /* advance buf ptr */
- }
-#endif
- break;
- case 0x05:
- strcpy(boot_dev_name, "EMMC");
-#if defined(CONFIG_MMC)
- if (mmc_read_bootloader(1, 0) != 0)
- goto error;
-#else
- goto error;
-#endif
- break;
- case 0x06:
- strcpy(boot_dev_name, "MMC/SD1");
-#if defined(CONFIG_MMC) && defined(CFG_CMD_FAT)
- if (mmc_read_bootloader(0, 1) != 0)
- goto error;
-#else
- goto error;
-#endif
- break;
- };
-#endif // START_LOADB_DOWNLOAD
- /* go run U-Boot and never return */
-// printf("Address of serial_printf = %08x\n", &serial_printf);
- printf("Starting OS Bootloader from %s ...\n", boot_dev_name);
- ((init_fnc_t *)CFG_LOADADDR)();
-
- /* should never come here */
-#if defined(CFG_ONENAND) || defined(CONFIG_MMC)
-error:
-#endif
- printf("Could not load or run bootloader!\n");
- hang();
-}
-
-#if 0
-#include <asm/arch/mux.h>
-
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-static inline void udelay(unsigned long us)
-{
- delay(us * 200); /* approximate */
-}
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-
-#define MUX_VAL(OFFSET,VALUE)\
-__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-
-#define CP(x) (CONTROL_PADCONF_##x)
-
-void hang (void)
-{
- /* call board specific hang function */
- board_hang();
-
- /* if board_hang() returns, hange here */
- printf("X-Loader hangs\n");
-
- for(;;) {
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- }
-}
-
-#else
-
-void hang (void)
-{
- /* call board specific hang function */
- board_hang();
-
- /* if board_hang() returns, hange here */
- printf("X-Loader hangs\n");
-
- for(;;)
- ;
-}
-
-#endif
diff --git a/uart-loader/lib/div0.c b/uart-loader/lib/div0.c
deleted file mode 100644
index 6267bf1..0000000
--- a/uart-loader/lib/div0.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Replacement (=dummy) for GNU/Linux division-by zero handler */
-void __div0 (void)
-{
- extern void hang (void);
-
- hang();
-}
diff --git a/uart-loader/lib/ecc_256.c b/uart-loader/lib/ecc_256.c
deleted file mode 100644
index 92c310f..0000000
--- a/uart-loader/lib/ecc_256.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * (C) Copyright 2000 Texas Instruments
- *
- * This file os based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CFG_SW_ECC_512
-
-/*
- * Pre-calculated 256-way 1 byte column parity
- */
-static const u_char nand_ecc_precalc_table[] = {
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
-};
-
-
-#ifdef NAND_LEGACY
-/*
- * Creates non-inverted ECC code from line parity
- */
-static void nand_trans_result(u_char reg2, u_char reg3,
- u_char *ecc_code)
-{
- u_char a, b, i, tmp1, tmp2;
-
- /* Initialize variables */
- a = b = 0x80;
- tmp1 = tmp2 = 0;
-
- /* Calculate first ECC byte */
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Calculate second ECC byte */
- b = 0x80;
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Store two of the ECC bytes */
- ecc_code[0] = tmp1;
- ecc_code[1] = tmp2;
-}
-
-/*
- * Calculate 3 byte ECC code for 256 byte block
- */
-/* ECC Calculation is different between NAND and NAND Legacy code
- * in U-Boot. If NAND_LEGACY is enabled in u-boot it should be
- * enabled in the config file in x-loader also
- */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
-{
- u_char idx, reg1, reg3;
- int j;
-
- /* Initialize variables */
- reg1 = reg3 = 0;
- ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
-
- /* Build up column parity */
- for(j = 0; j < 256; j++) {
-
- /* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[dat[j]];
- reg1 ^= idx;
-
- /* All bit XOR = 1 ? */
- if (idx & 0x40) {
- reg3 ^= (u_char) j;
-
- }
- }
-
- /* Create non-inverted ECC code from line parity */
- nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code);
-
- /* Calculate final ECC code */
- ecc_code[0] = ~ecc_code[0];
- ecc_code[1] = ~ecc_code[1];
- ecc_code[2] = ((~reg1) << 2) | 0x03;
-}
-
-/*
- * Detect and correct a 1 bit error for 256 byte block
- */
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-{
- u_char a, b, c, d1, d2, d3, add, bit, i;
-
- /* Do error detection */
- d1 = calc_ecc[0] ^ read_ecc[0];
- d2 = calc_ecc[1] ^ read_ecc[1];
- d3 = calc_ecc[2] ^ read_ecc[2];
-
- if ((d1 | d2 | d3) == 0) {
- /* No errors */
- return 0;
- }
- else {
- a = (d1 ^ (d1 >> 1)) & 0x55;
- b = (d2 ^ (d2 >> 1)) & 0x55;
- c = (d3 ^ (d3 >> 1)) & 0x54;
-
- /* Found and will correct single bit error in the data */
- if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
- c = 0x80;
- add = 0;
- a = 0x80;
- for (i=0; i<4; i++) {
- if (d1 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- c = 0x80;
- for (i=0; i<4; i++) {
- if (d2 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- bit = 0;
- b = 0x04;
- c = 0x80;
- for (i=0; i<3; i++) {
- if (d3 & c)
- bit |= b;
- c >>= 2;
- b >>= 1;
- }
- b = 0x01;
- a = dat[add];
- a ^= (b << bit);
- dat[add] = a;
- return 1;
- }
- else {
- i = 0;
- while (d1) {
- if (d1 & 0x01)
- ++i;
- d1 >>= 1;
- }
- while (d2) {
- if (d2 & 0x01)
- ++i;
- d2 >>= 1;
- }
- while (d3) {
- if (d3 & 0x01)
- ++i;
- d3 >>= 1;
- }
- if (i == 1) {
- /* ECC Code Error Correction */
- read_ecc[0] = calc_ecc[0];
- read_ecc[1] = calc_ecc[1];
- read_ecc[2] = calc_ecc[2];
- return 2;
- }
- else {
- /* Uncorrectable Error */
- return -1;
- }
- }
- }
-
- /* Should never happen */
- return -1;
-}
-#else /* not NAND_LEGACY */
-void nand_calculate_ecc(const u_char *dat, u_char *ecc_code)
-{
- uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
- int i;
-
- /* Initialize variables */
- reg1 = reg2 = reg3 = 0;
-
- /* Build up column parity */
- for(i = 0; i < 256; i++) {
- /* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[*dat++];
- reg1 ^= (idx & 0x3f);
-
- /* All bit XOR = 1 ? */
- if (idx & 0x40) {
- reg3 ^= (uint8_t) i;
- reg2 ^= ~((uint8_t) i);
- }
- }
-
- /* Create non-inverted ECC code from line parity */
- tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
- tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
- tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
- tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
- tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
- tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
- tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
- tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
-
- tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
- tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
- tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
- tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
- tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
- tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
- tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
- tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
-
- /* Calculate final ECC code */
- ecc_code[0] = ~tmp1;
- ecc_code[1] = ~tmp2;
- ecc_code[2] = ((~reg1) << 2) | 0x03;
-}
-
-static inline int countbits(uint32_t byte)
-{
- int res = 0;
-
- for (;byte; byte >>= 1)
- res += byte & 0x01;
- return res;
-}
-
-/*
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
- * @dat: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
- *
- * Detect and correct a 1 bit error for 256 byte block
- */
-int nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-{
- uint8_t s0, s1, s2;
-
- s0 = calc_ecc[0] ^ read_ecc[0];
- s1 = calc_ecc[1] ^ read_ecc[1];
- s2 = calc_ecc[2] ^ read_ecc[2];
-
- if ((s0 | s1 | s2) == 0)
- return 0;
-
-/* Check for a single bit error */
- if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
- ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
- ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
-
- uint32_t byteoffs, bitnum;
-
- byteoffs = (s1 << 0) & 0x80;
- byteoffs |= (s1 << 1) & 0x40;
- byteoffs |= (s1 << 2) & 0x20;
- byteoffs |= (s1 << 3) & 0x10;
-
- byteoffs |= (s0 >> 4) & 0x08;
- byteoffs |= (s0 >> 3) & 0x04;
- byteoffs |= (s0 >> 2) & 0x02;
- byteoffs |= (s0 >> 1) & 0x01;
-
- bitnum = (s2 >> 5) & 0x04;
- bitnum |= (s2 >> 4) & 0x02;
- bitnum |= (s2 >> 3) & 0x01;
-
- dat[byteoffs] ^= (1 << bitnum);
-
- return 1;
- }
-
- if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
- return 1;
-
- return -1;
-}
-#endif /* NAND_LEGACY */
-#endif /* ! CFG_SW_ECC_512 */
diff --git a/uart-loader/lib/ecc_512.c b/uart-loader/lib/ecc_512.c
deleted file mode 100644
index 29647c6..0000000
--- a/uart-loader/lib/ecc_512.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- * (C) Copyright 2000 Texas Instruments
- *
- * This file os based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#ifdef CFG_SW_ECC_512
-
-/*
- * invparity is a 256 byte table that contains the odd parity
- * for each byte. So if the number of bits in a byte is even,
- * the array element is 1, and when the number of bits is odd
- * the array eleemnt is 0.
- */
-static const char invparity[256] = {
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
-};
-
-/*
- * bitsperbyte contains the number of bits per byte
- * this is only used for testing and repairing parity
- * (a precalculated value slightly improves performance)
- */
-static const char bitsperbyte[256] = {
- 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
-};
-
-/*
- * addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
- * this is only used for repairing parity
- * see the comments in nand_correct_data for more details
- */
-static const char addressbits[256] = {
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
-};
-
-/*
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
- * block
- * @mtd: MTD block structure
- * @buf: input buffer with raw data
- * @code: output buffer with ECC
- */
-void nand_calculate_ecc(const u_char *buf, u_char *code)
-{
- int i;
- const uint32_t *bp = (uint32_t *)buf;
- /* 256 or 512 bytes/ecc */
- int eccsize = 512;
- const uint32_t eccsize_mult = eccsize >> 8;
- uint32_t cur; /* current value in buffer */
- /* rp0..rp15..rp17 are the various accumulated parities (per byte) */
- uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
- uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
- uint32_t rp17 = 0;
- uint32_t par; /* the cumulative parity for all data */
- uint32_t tmppar; /* the cumulative parity for this iteration;
- for rp12, rp14 and rp16 at the end of the
- loop */
- par = 0;
- rp4 = 0;
- rp6 = 0;
- rp8 = 0;
- rp10 = 0;
- rp12 = 0;
- rp14 = 0;
- rp16 = 0;
-
- /*
- * The loop is unrolled a number of times;
- * This avoids if statements to decide on which rp value to update
- * Also we process the data by longwords.
- * Note: passing unaligned data might give a performance penalty.
- * It is assumed that the buffers are aligned.
- * tmppar is the cumulative sum of this iteration.
- * needed for calculating rp12, rp14, rp16 and par
- * also used as a performance improvement for rp6, rp8 and rp10
- */
- for (i = 0; i < eccsize_mult << 2; i++) {
- cur = *bp++;
- tmppar = cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= tmppar;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp8 ^= tmppar;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp10 ^= tmppar;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp8 ^= cur;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
-
- par ^= tmppar;
- if ((i & 0x1) == 0)
- rp12 ^= tmppar;
- if ((i & 0x2) == 0)
- rp14 ^= tmppar;
- if (eccsize_mult == 2 && (i & 0x4) == 0)
- rp16 ^= tmppar;
- }
-
- /*
- * handle the fact that we use longword operations
- * we'll bring rp4..rp14..rp16 back to single byte entities by
- * shifting and xoring first fold the upper and lower 16 bits,
- * then the upper and lower 8 bits.
- */
- rp4 ^= (rp4 >> 16);
- rp4 ^= (rp4 >> 8);
- rp4 &= 0xff;
- rp6 ^= (rp6 >> 16);
- rp6 ^= (rp6 >> 8);
- rp6 &= 0xff;
- rp8 ^= (rp8 >> 16);
- rp8 ^= (rp8 >> 8);
- rp8 &= 0xff;
- rp10 ^= (rp10 >> 16);
- rp10 ^= (rp10 >> 8);
- rp10 &= 0xff;
- rp12 ^= (rp12 >> 16);
- rp12 ^= (rp12 >> 8);
- rp12 &= 0xff;
- rp14 ^= (rp14 >> 16);
- rp14 ^= (rp14 >> 8);
- rp14 &= 0xff;
- if (eccsize_mult == 2) {
- rp16 ^= (rp16 >> 16);
- rp16 ^= (rp16 >> 8);
- rp16 &= 0xff;
- }
-
- /*
- * we also need to calculate the row parity for rp0..rp3
- * This is present in par, because par is now
- * rp3 rp3 rp2 rp2 in little endian and
- * rp2 rp2 rp3 rp3 in big endian
- * as well as
- * rp1 rp0 rp1 rp0 in little endian and
- * rp0 rp1 rp0 rp1 in big endian
- * First calculate rp2 and rp3
- */
- rp3 = (par >> 16);
- rp3 ^= (rp3 >> 8);
- rp3 &= 0xff;
- rp2 = par & 0xffff;
- rp2 ^= (rp2 >> 8);
- rp2 &= 0xff;
-
- /* reduce par to 16 bits then calculate rp1 and rp0 */
- par ^= (par >> 16);
- rp1 = (par >> 8) & 0xff;
- rp0 = (par & 0xff);
-
- /* finally reduce par to 8 bits */
- par ^= (par >> 8);
- par &= 0xff;
-
- /*
- * and calculate rp5..rp15..rp17
- * note that par = rp4 ^ rp5 and due to the commutative property
- * of the ^ operator we can say:
- * rp5 = (par ^ rp4);
- * The & 0xff seems superfluous, but benchmarking learned that
- * leaving it out gives slightly worse results. No idea why, probably
- * it has to do with the way the pipeline in pentium is organized.
- */
- rp5 = (par ^ rp4) & 0xff;
- rp7 = (par ^ rp6) & 0xff;
- rp9 = (par ^ rp8) & 0xff;
- rp11 = (par ^ rp10) & 0xff;
- rp13 = (par ^ rp12) & 0xff;
- rp15 = (par ^ rp14) & 0xff;
- if (eccsize_mult == 2)
- rp17 = (par ^ rp16) & 0xff;
-
- /*
- * Finally calculate the ecc bits.
- * Again here it might seem that there are performance optimisations
- * possible, but benchmarks showed that on the system this is developed
- * the code below is the fastest
- */
- code[1] =
- (invparity[rp7] << 7) |
- (invparity[rp6] << 6) |
- (invparity[rp5] << 5) |
- (invparity[rp4] << 4) |
- (invparity[rp3] << 3) |
- (invparity[rp2] << 2) |
- (invparity[rp1] << 1) |
- (invparity[rp0]);
- code[0] =
- (invparity[rp15] << 7) |
- (invparity[rp14] << 6) |
- (invparity[rp13] << 5) |
- (invparity[rp12] << 4) |
- (invparity[rp11] << 3) |
- (invparity[rp10] << 2) |
- (invparity[rp9] << 1) |
- (invparity[rp8]);
- if (eccsize_mult == 1)
- code[2] =
- (invparity[par & 0xf0] << 7) |
- (invparity[par & 0x0f] << 6) |
- (invparity[par & 0xcc] << 5) |
- (invparity[par & 0x33] << 4) |
- (invparity[par & 0xaa] << 3) |
- (invparity[par & 0x55] << 2) |
- 3;
- else
- code[2] =
- (invparity[par & 0xf0] << 7) |
- (invparity[par & 0x0f] << 6) |
- (invparity[par & 0xcc] << 5) |
- (invparity[par & 0x33] << 4) |
- (invparity[par & 0xaa] << 3) |
- (invparity[par & 0x55] << 2) |
- (invparity[rp17] << 1) |
- (invparity[rp16] << 0);
-}
-
-/**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
- * @buf: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
- *
- * Detect and correct a 1 bit error for 256/512 byte block
- */
-int nand_correct_data(unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
-{
- unsigned char b0, b1, b2;
- uint32_t byte_addr;
- unsigned char bit_addr;
- /* 256 or 512 bytes/ecc */
- int eccsize = 512;
- const uint32_t eccsize_mult = eccsize >> 8;
- /*
- * b0 to b2 indicate which bit is faulty (if any)
- * we might need the xor result more than once,
- * so keep them in a local var
- */
- b0 = read_ecc[1] ^ calc_ecc[1];
- b1 = read_ecc[0] ^ calc_ecc[0];
- b2 = read_ecc[2] ^ calc_ecc[2];
-
- /* check if there are any bitfaults */
-
- /* repeated if statements are slightly more efficient than switch ... */
- /* ordered in order of likelihood */
-
- if ((b0 | b1 | b2) == 0)
- return 0; /* no error */
-
- if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) &&
- (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) &&
- ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) ||
- (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) {
- /* single bit error */
- /*
- * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty
- * byte, cp 5/3/1 indicate the faulty bit.
- * A lookup table (called addressbits) is used to filter
- * the bits from the byte they are in.
- * A marginal optimisation is possible by having three
- * different lookup tables.
- * One as we have now (for b0), one for b2
- * (that would avoid the >> 1), and one for b1 (with all values
- * << 4). However it was felt that introducing two more tables
- * hardly justify the gain.
- *
- * The b2 shift is there to get rid of the lowest two bits.
- * We could also do addressbits[b2] >> 1 but for the
- * performace it does not make any difference
- */
- if (eccsize_mult == 1)
- byte_addr = (addressbits[b1] << 4) + addressbits[b0];
- else
- byte_addr = (addressbits[b2 & 0x3] << 8) +
- (addressbits[b1] << 4) + addressbits[b0];
- bit_addr = addressbits[b2 >> 2];
- /* flip the bit */
- buf[byte_addr] ^= (1 << bit_addr);
- return 1;
-
- }
- /* count nr of bits; use table lookup, faster than calculating it */
- if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
-
- return -1;
-}
-#endif /* CFG_SW_ECC_512 */
diff --git a/uart-loader/lib/printf.c b/uart-loader/lib/printf.c
deleted file mode 100644
index 91d22fc..0000000
--- a/uart-loader/lib/printf.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- *
- * Based on the following file:
- * linux/lib/vsprintf.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */
-/*
- * Wirzenius wrote this portably, Torvalds fucked it up :-)
- */
-
-#include <stdarg.h>
-#include <common.h>
-
-#ifdef CFG_PRINTF
-
-/* we use this so that we can do without the ctype library */
-#define is_digit(c) ((c) >= '0' && (c) <= '9')
-
-size_t strnlen(const char * s, size_t count)
-{
- const char *sc;
-
- for (sc = s; count-- && *sc != '\0'; ++sc)
- /* nothing */;
- return sc - s;
-}
-
-static int skip_atoi(const char **s)
-{
- int i=0;
-
- while (is_digit(**s))
- i = i*10 + *((*s)++) - '0';
- return i;
-}
-
-#define ZEROPAD 1 /* pad with zero */
-#define SIGN 2 /* unsigned/signed long */
-#define PLUS 4 /* show plus */
-#define SPACE 8 /* space if plus */
-#define LEFT 16 /* left justified */
-#define SPECIAL 32 /* 0x */
-#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
-
-#define do_div(n,base) ({ \
-int __res; \
-__res = ((unsigned long) n) % (unsigned) base; \
-n = ((unsigned long) n) / (unsigned) base; \
-__res; })
-
-static char * number(char * str, long num, int base, int size, int precision
- ,int type)
-{
- char c,sign,tmp[66];
- const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
- int i;
-
- if (type & LARGE)
- digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
- if (type & LEFT)
- type &= ~ZEROPAD;
- if (base < 2 || base > 36)
- return 0;
- c = (type & ZEROPAD) ? '0' : ' ';
- sign = 0;
- if (type & SIGN) {
- if (num < 0) {
- sign = '-';
- num = -num;
- size--;
- } else if (type & PLUS) {
- sign = '+';
- size--;
- } else if (type & SPACE) {
- sign = ' ';
- size--;
- }
- }
- if (type & SPECIAL) {
- if (base == 16)
- size -= 2;
- else if (base == 8)
- size--;
- }
- i = 0;
- if (num == 0)
- tmp[i++]='0';
- else while (num != 0)
- tmp[i++] = digits[do_div(num,base)];
- if (i > precision)
- precision = i;
- size -= precision;
- if (!(type&(ZEROPAD+LEFT)))
- while(size-->0)
- *str++ = ' ';
- if (sign)
- *str++ = sign;
- if (type & SPECIAL) {
- if (base==8)
- *str++ = '0';
- else if (base==16) {
- *str++ = '0';
- *str++ = digits[33];
- }
- }
- if (!(type & LEFT))
- while (size-- > 0)
- *str++ = c;
- while (i < precision--)
- *str++ = '0';
- while (i-- > 0)
- *str++ = tmp[i];
- while (size-- > 0)
- *str++ = ' ';
- return str;
-}
-
-
-static int vsprintf(char *buf, const char *fmt, va_list args)
-{
- int len;
- unsigned long num;
- int i, base;
- char * str;
- const char *s;
-
- int flags; /* flags to number() */
-
- int field_width; /* width of output field */
- int precision; /* min. # of digits for integers; max
- number of chars for from string */
- int qualifier; /* 'h', 'l', or 'L' for integer fields */
-
- for (str=buf ; *fmt ; ++fmt) {
- if (*fmt != '%') {
- *str++ = *fmt;
- continue;
- }
-
- /* process flags */
- flags = 0;
- repeat:
- ++fmt; /* this also skips first '%' */
- switch (*fmt) {
- case '-': flags |= LEFT; goto repeat;
- case '+': flags |= PLUS; goto repeat;
- case ' ': flags |= SPACE; goto repeat;
- case '#': flags |= SPECIAL; goto repeat;
- case '0': flags |= ZEROPAD; goto repeat;
- }
-
- /* get field width */
- field_width = -1;
- if (is_digit(*fmt))
- field_width = skip_atoi(&fmt);
- else if (*fmt == '*') {
- ++fmt;
- /* it's the next argument */
- field_width = va_arg(args, int);
- if (field_width < 0) {
- field_width = -field_width;
- flags |= LEFT;
- }
- }
-
- /* get the precision */
- precision = -1;
- if (*fmt == '.') {
- ++fmt;
- if (is_digit(*fmt))
- precision = skip_atoi(&fmt);
- else if (*fmt == '*') {
- ++fmt;
- /* it's the next argument */
- precision = va_arg(args, int);
- }
- if (precision < 0)
- precision = 0;
- }
-
- /* get the conversion qualifier */
- qualifier = -1;
- if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') {
- qualifier = *fmt;
- ++fmt;
- }
-
- /* default base */
- base = 10;
-
- switch (*fmt) {
- case 'c':
- if (!(flags & LEFT))
- while (--field_width > 0)
- *str++ = ' ';
- *str++ = (unsigned char) va_arg(args, int);
- while (--field_width > 0)
- *str++ = ' ';
- continue;
-
- case 's':
- s = va_arg(args, char *);
- if (!s)
- s = "<NULL>";
-
- len = strnlen(s, precision);
-
- if (!(flags & LEFT))
- while (len < field_width--)
- *str++ = ' ';
- for (i = 0; i < len; ++i)
- *str++ = *s++;
- while (len < field_width--)
- *str++ = ' ';
- continue;
-
- case 'p':
- if (field_width == -1) {
- field_width = 2*sizeof(void *);
- flags |= ZEROPAD;
- }
- str = number(str,
- (unsigned long) va_arg(args, void *), 16,
- field_width, precision, flags);
- continue;
-
-
- case 'n':
- if (qualifier == 'l') {
- long * ip = va_arg(args, long *);
- *ip = (str - buf);
- } else {
- int * ip = va_arg(args, int *);
- *ip = (str - buf);
- }
- continue;
-
- case '%':
- *str++ = '%';
- continue;
-
- /* integer number formats - set up the flags and "break" */
- case 'o':
- base = 8;
- break;
-
- case 'X':
- flags |= LARGE;
- case 'x':
- base = 16;
- break;
-
- case 'd':
- case 'i':
- flags |= SIGN;
- case 'u':
- break;
-
- default:
- *str++ = '%';
- if (*fmt)
- *str++ = *fmt;
- else
- --fmt;
- continue;
- }
- if (qualifier == 'l')
- num = va_arg(args, unsigned long);
- else if (qualifier == 'h') {
- num = (unsigned short) va_arg(args, int);
- if (flags & SIGN)
- num = (short) num;
- } else if (flags & SIGN)
- num = va_arg(args, int);
- else
- num = va_arg(args, unsigned int);
- str = number(str, num, base, field_width, precision, flags);
- }
- *str = '\0';
- return str-buf;
-}
-
-void serial_printf (const char *fmt, ...)
-{
- va_list args;
- uint i;
- char printbuffer[CFG_PBSIZE];
-
- va_start (args, fmt);
-
- /* For this to work, printbuffer must be larger than
- * anything we ever want to print.
- */
- i = vsprintf (printbuffer, fmt, args);
- va_end (args);
-
- /* Print the string */
- serial_puts (printbuffer);
-}
-#endif
diff --git a/uart-loader/mkconfig b/uart-loader/mkconfig
deleted file mode 100755
index 43b6f09..0000000
--- a/uart-loader/mkconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh -e
-
-# Script to create header files and links to configure
-# X-Loader for a specific board.
-#
-# Parameters: Target Architecture CPU Board
-#
-# (C) 2004 Texas Instruments
-# (C) 2002 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
-#
-
-APPEND=no # Default: Create new config file
-
-while [ $# -gt 0 ] ; do
- case "$1" in
- --) shift ; break ;;
- -a) shift ; APPEND=yes ;;
- *) break ;;
- esac
-done
-
-[ $# -lt 4 ] && exit 1
-[ $# -gt 5 ] && exit 1
-
-echo "Configuring for $1 board..."
-
-cd ./include
-
-#
-# Create link to architecture specific headers
-#
-rm -f asm/arch
-ln -s arch-$3 asm/arch
-
-if [ "$2" = "arm" ] ; then
- rm -f asm/proc
- ln -s proc-armv asm/proc
-fi
-
-#
-# Create include file for Make
-#
-echo "ARCH = $2" > config.mk
-echo "CPU = $3" >> config.mk
-echo "BOARD = $4" >> config.mk
-
-[ "$5" ] && echo "VENDOR = $5" >> config.mk
-
-#
-# Create board specific header file
-#
-if [ "$APPEND" = "yes" ] # Append to existing config file
-then
- echo >> config.h
-else
- > config.h # Create new config file
-fi
-echo "/* Automatically generated - do not edit */" >>config.h
-echo "#include <configs/$1.h>" >>config.h
-
-exit 0
diff --git a/uart-loader/scripts/mkoneboot.sh b/uart-loader/scripts/mkoneboot.sh
deleted file mode 100644
index f0862a5..0000000
--- a/uart-loader/scripts/mkoneboot.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-IMAGE1=x-load.bin.ift
-IMAGE2=x-load-signed.ift
-TMP=oneloader
-PAGESIZE=2048
-
-size=`ls -la $IMAGE1 | awk -F' ' '{ printf $5}'`
-let remain=$PAGESIZE-$size
-dd if=/dev/zero of=$IMAGE2 bs=1 count=512
-#dd if=/dev/zero of=zerofile bs=$remain count=1 > /dev/null 2> /dev/null
-cat $IMAGE1>>$IMAGE2
-
-rm -f $IMAGE1
-
-echo "Create $IMAGE2 completed..."
diff --git a/uart-loader/scripts/signGP.c b/uart-loader/scripts/signGP.c
deleted file mode 100644
index 0e8ed07..0000000
--- a/uart-loader/scripts/signGP.c
+++ /dev/null
@@ -1,73 +0,0 @@
-//
-// signGP.c
-// Read the x-load.bin file and write out the x-load.bin.ift file.
-// The signed image is the original pre-pended with the size of the image
-// and the load address. If not entered on command line, file name is
-// assumed to be x-load.bin in current directory and load address is
-// 0x40200800.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <malloc.h>
-
-
-main(int argc, char *argv[])
-{
- int i;
- char ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch;
- FILE *ifile, *ofile;
- unsigned long loadaddr, len;
- struct stat sinfo;
-
-
- // Default to x-load.bin and 0x40200800.
- strcpy(ifname, "x-load.bin");
- loadaddr = 0x40200800;
-
- if ((argc == 2) || (argc == 3))
- strcpy(ifname, argv[1]);
-
- if (argc == 3)
- loadaddr = strtol(argv[2], NULL, 16);
-
- // Form the output file name.
- strcpy(ofname, ifname);
- strcat(ofname, ".ift");
-
- // Open the input file.
- ifile = fopen(ifname, "rb");
- if (ifile == NULL) {
- printf("Cannot open %s\n", ifname);
- exit(0);
- }
-
- // Get file length.
- stat(ifname, &sinfo);
- len = sinfo.st_size;
-
- // Open the output file and write it.
- ofile = fopen(ofname, "wb");
- if (ofile == NULL) {
- printf("Cannot open %s\n", ofname);
- fclose(ifile);
- exit(0);
- }
-
- // Pad 1 sector of zeroes.
- //ch = 0x00;
- //for (i=0; i<0x200; i++)
- // fwrite(&ch, 1, 1, ofile);
-
- fwrite(&len, 1, 4, ofile);
- fwrite(&loadaddr, 1, 4, ofile);
- for (i=0; i<len; i++) {
- fread(&ch, 1, 1, ifile);
- fwrite(&ch, 1, 1, ofile);
- }
-
- fclose(ifile);
- fclose(ofile);
-}
diff --git a/uart-monitor/.gitignore b/uart-monitor/.gitignore
deleted file mode 100644
index 5bc6dd2..0000000
--- a/uart-monitor/.gitignore
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# NOTE! Don't add files that are generated in specific
-# subdirectories here. Add them in the ".gitignore" file
-# in that subdirectory instead.
-#
-# Normal rules
-#
-.*
-*.o
-*.o.*
-*.a
-*.s
-*.ko
-*.so
-*.so.dbg
-*.mod.c
-*.i
-*.lst
-*.symtypes
-
-#
-# Top-level generic files
-#
-x-load
-x-load.*
-System.map
-include/asm/arch
-include/asm/proc
-include/config.h
-include/config.mk
-!.gitignore
-signGP
-MLO
-
-#
-# Generated include files
-#
-
-# stgit generated dirs
-patches-*
-
-# quilt's files
-patches
-series
-
-# cscope files
-cscope.*
-
-*.orig
-*.rej
diff --git a/uart-monitor/Makefile b/uart-monitor/Makefile
deleted file mode 100644
index 73f82ec..0000000
--- a/uart-monitor/Makefile
+++ /dev/null
@@ -1,222 +0,0 @@
-#
-# (C) Copyright 2004-2006, Texas Instruments, <www.ti.com>
-# Jian Zhang <jzhang@ti.com>
-#
-# (C) Copyright 2000-2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-HOSTARCH := $(shell uname -m | \
- sed -e s/i.86/i386/ \
- -e s/sun4u/sparc64/ \
- -e s/arm.*/arm/ \
- -e s/sa110/arm/ \
- -e s/powerpc/ppc/ \
- -e s/macppc/ppc/)
-
-HOSTOS := $(shell uname -s | tr A-Z a-z | \
- sed -e 's/\(cygwin\).*/cygwin/')
-
-export HOSTARCH
-
-# Deal with colliding definitions from tcsh etc.
-VENDOR=
-
-#########################################################################
-
-TOPDIR := $(shell if [ "$$PWD" != "" ]; then echo $$PWD; else pwd; fi)
-export TOPDIR
-
-ifeq (include/config.mk,$(wildcard include/config.mk))
-# load ARCH, BOARD, and CPU configuration
-include include/config.mk
-export ARCH CPU BOARD VENDOR
-# load other configuration
-include $(TOPDIR)/config.mk
-
-ifndef CROSS_COMPILE
-CROSS_COMPILE = arm-none-linux-gnueabi-
-#CROSS_COMPILE = arm-linux-
-export CROSS_COMPILE
-endif
-
-#########################################################################
-# X-LOAD objects....order is important (i.e. start must be first)
-
-OBJS = cpu/$(CPU)/start.o
-
-
-LIBS += board/$(BOARDDIR)/lib$(BOARD).a
-LIBS += cpu/$(CPU)/lib$(CPU).a
-LIBS += lib/lib$(ARCH).a
-LIBS += fs/fat/libfat.a
-LIBS += disk/libdisk.a
-LIBS += drivers/libdrivers.a
-LIBS += common/libcommon.a
-.PHONY : $(LIBS)
-
-# Add GCC lib
-PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
-SUBDIRS =
-#########################################################################
-#########################################################################
-
-ALL = x-load.bin System.map
-
-all: $(ALL)
-
-ift: $(ALL) x-load.bin.ift
-
-x-load.bin.ift: signGP System.map x-load.bin
- TEXT_BASE=`grep -w _start System.map|cut -d ' ' -f1`
- ./signGP x-load.bin $(TEXT_BASE)
- cp x-load.bin.ift MLO
-
-x-load.bin: x-load
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-x-load: $(OBJS) $(LIBS) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- $(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
- --start-group $(LIBS) --end-group $(PLATFORM_LIBS) \
- -Map x-load.map -o x-load
-
-$(LIBS):
- $(MAKE) -C `dirname $@`
-
-
-System.map: x-load
- @$(NM) $< | \
- grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
- sort > System.map
-
-oneboot: x-load.bin
- scripts/mkoneboot.sh
-
-signGP: scripts/signGP.c
- gcc -O3 -o signGP $<
-
-#########################################################################
-else
-all install x-load x-load.srec oneboot depend dep:
- @echo "System not configured - see README" >&2
- @ exit 1
-endif
-
-#########################################################################
-
-unconfig:
- rm -f include/config.h include/config.mk
-
-#========================================================================
-# ARM
-#========================================================================
-#########################################################################
-## OMAP1 (ARM92xT) Systems
-#########################################################################
-
-omap1710h3_config : unconfig
- @./mkconfig $(@:_config=) arm arm926ejs omap1710h3
-
-#########################################################################
-## OMAP2 (ARM1136) Systems
-#########################################################################
-
-omap2420h4_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2420h4
-
-omap2430sdp_config : unconfig
- @./mkconfig $(@:_config=) arm arm1136 omap2430sdp
-
-#########################################################################
-## OMAP3 (ARM-CortexA8) Systems
-#########################################################################
-omap3430sdp_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430sdp
-omap3430labrador_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3430labradordownload_config : unconfig
- @./mkconfig omap3430labrador arm omap3 omap3430labrador; \
- echo "#define START_LOADB_DOWNLOAD" >> ./include/config-2.h; \
- cat ./include/config.h >> ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3430zoom2_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3430zoom2_512m_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed -e ' s/CONFIG_3430ZOOM2/CONFIG_3430ZOOM2_512M/ ' < \
- ./include/configs/omap3430zoom2.h | \
- sed -e ' s/#define CFG_NAND 1/#undef CFG_NAND/ ' \
- >> ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630zoom3_config : omap3630zoom3_1G_config
-
-omap3630zoom3_512m_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/omap3630zoom3_512m/omap3630zoom3/ < \
- ./include/config.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630zoom3_1G_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/CONFIG_3630ZOOM3/CONFIG_3630ZOOM3_1G/ < \
- ./include/configs/omap3630zoom3.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-
-omap3630sdp_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
-
-omap3630sdp_1G_config : unconfig
- @./mkconfig $(@:_config=) arm omap3 omap3430labrador
- sed s/CONFIG_3630SDP/CONFIG_3630SDP_1G/ < \
- ./include/configs/omap3630sdp.h > ./include/config-2.h; \
- mv ./include/config-2.h ./include/config.h
-#########################################################################
-
-clean:
- find . -type f \
- \( -name 'core' -o -name '*.bak' -o -name '*~' \
- -o -name '*.o' -o -name '*.a' \) -print \
- | xargs rm -f
-
-clobber: clean
- find . -type f \
- \( -name .depend -o -name '*.srec' -o -name '*.bin' \) \
- -print \
- | xargs rm -f
- rm -f $(OBJS) *.bak tags TAGS
- rm -fr *.*~
- rm -f x-load x-load.map $(ALL) x-load.bin.ift signGP MLO
- rm -f include/asm/proc include/asm/arch
-
-mrproper \
-distclean: clobber unconfig
-
-backup:
- F=`basename $(TOPDIR)` ; cd .. ; \
- gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
-
-#########################################################################
diff --git a/uart-monitor/README b/uart-monitor/README
deleted file mode 100644
index ae2662a..0000000
--- a/uart-monitor/README
+++ /dev/null
@@ -1,152 +0,0 @@
-#
-# (C) Copyright 2004-2006 Texas Instruments
-#
-# Some cut/paste from U-Boot README
-# (C) Copyright 2000 - 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-Summary:
-========
-
-This directory contains the source code for X-Loader, an initial program
-loader for Embedded boards based on OMAP processors. X-Loader can be
-signed by Texas Instruments IFT and installed to Nand flash to achieve
-Nand booting.
-
-
-Status:
-=======
-
-The support for Texas Instruments H3 board (OMAP1710) has been implemented
-and tested. (May 2004)
-The support for Texas Instruments H4 board (OMAP2420) has been implemented
-and tested. (Nov 2004)
-The support for Texas Instruments 2430SDP board (OMAP2430) has been implemented
-and tested. (Jul 2006)
-The support for Texas Instruments 3430SDP board (OMAP3430) has been implemented
-and tested. (Dec 2006)
-
-
-Support for other OMAP boards can be added.
-
-
-Directory Hierarchy:
-====================
-
-- board Board dependent files
-- cpu CPU specific files
-- drivers Commonly used device drivers
-- lib Libraries
-
-- cpu/arm926ejs Files specific to ARM 926 CPUs
-- cpu/arm1136 Files specific to ARM 1136 CPUs
-- cpu/omap3 Files specific to ARM CortexA8 CPU
-
-
-- board/omap1710h3
- Files specific to OMAP 1710 H3 boards
-- board/omap2420h4
- Files specific to OMAP 2420 H4 boards
-- board/omap2430sdp
- Files specific to OMAP 2430 2430sdp boards
-- board/omap3430sdp
- Files specific to OMAP 3420sdp boards
-
-
-Software Configuration:
-=======================
-
-Configuration is usually done using C preprocessor defines. Configuration
-depends on the combination of board and CPU type; all such information is
-kept in a configuration file "include/configs/<board_name>.h".
-
-Example: For a H3 module, all configuration settings are in
-"include/configs/omap1710h3.h".
-
-For all supported boards there are ready-to-use default
-configurations available; just type "make <board_name>_config".
-
-Example: For a H3 module type:
-
- cd x-load
- make omap1710h3_config
-
-After a board has been configured, type "make" to build it supposing the
-needed cross tools are in your path.
-
-
-Image Format:
-=============
-
-X-Loader expects OS boot loader (e.g. U-Boot) in Nand flash using
-JFFS2 style ECC.
-
-
-Prepare Booting Nand Flash:
-===========================
-
-After you have built x-load.bin for your board, you need to do the
-followings to get it into Nand flash:
-
-1. Use Texas Instruments IFT to sign x-load.bin. This results in a
-signed image called x-load.bin.ift.
-2. Use Texas Instruments FlashPrep to generate a .out file using
-FlashWriterNand and specifying 0 as nand target address.
-3. Use Texas instrumnets Code Composer Studio to run the .out file
-which flashes x-load.bin.ift to Nand flash.
-
-Next you need to get your OS boot loader to Nand at the address your
-X-Loader expects. For the H3 example, you can use U-Boot to flash U-Boot.
-You can't use FlashWriterNand because it uses ROM code ECC style.
-
-
-More Information
-================
-
-OMAP1710 NAND Booting Design Document has more information.
-
-Implemenation notes:
-====================
-H3, H4 support NAND flash booting
-2430sdp & 3430sdp support OneNAND booting
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- \ No newline at end of file
diff --git a/uart-monitor/arm_config.mk b/uart-monitor/arm_config.mk
deleted file mode 100644
index 73d9625..0000000
--- a/uart-monitor/arm_config.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000-2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_CPPFLAGS += -DCONFIG_ARM -D__ARM__
diff --git a/uart-monitor/board/omap3430labrador/Makefile b/uart-monitor/board/omap3430labrador/Makefile
deleted file mode 100644
index c03134c..0000000
--- a/uart-monitor/board/omap3430labrador/Makefile
+++ /dev/null
@@ -1,47 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(BOARD).a
-
-OBJS := omap3430labrador.o
-SOBJS := platform.o
-
-$(LIB): $(OBJS) $(SOBJS)
- $(AR) crv $@ $^
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak .depend
-
-#########################################################################
-
-.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
-
--include .depend
-
-#########################################################################
diff --git a/uart-monitor/board/omap3430labrador/config.mk b/uart-monitor/board/omap3430labrador/config.mk
deleted file mode 100644
index d6ad6c5..0000000
--- a/uart-monitor/board/omap3430labrador/config.mk
+++ /dev/null
@@ -1,22 +0,0 @@
-#
-# (C) Copyright 2006
-# Texas Instruments, <www.ti.com>
-#
-# SDP3430 board uses OMAP3430 (ARM-CortexA8) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# SDP3430 has 1 bank of 32MB or 128MB mDDR-SDRAM on CS0
-# SDP3430 has 1 bank of 32MB or 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000'0000 (bank1) - re-mappable below CS1
-
-# For use if you want X-Loader to relocate from SRAM to DDR
-#TEXT_BASE = 0x80e80000
-
-# For XIP in 64K of SRAM or debug (GP device has it all availabe)
-# SRAM 40200000-4020FFFF base
-# initial stack at 0x4020fffc used in s_init (below xloader).
-# The run time stack is (above xloader, 2k below)
-# If any globals exist there needs to be room for them also
-TEXT_BASE = 0x40208800
diff --git a/uart-monitor/board/omap3430labrador/omap3430labrador.c b/uart-monitor/board/omap3430labrador/omap3430labrador.c
deleted file mode 100644
index 1a4e243..0000000
--- a/uart-monitor/board/omap3430labrador/omap3430labrador.c
+++ /dev/null
@@ -1,875 +0,0 @@
-/*
- * (C) Copyright 2006-2009
- * Texas Instruments, <www.ti.com>
- * Jian Zhang <jzhang@ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/rev.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/mem.h>
-
-/* Used to index into DPLL parameter tables */
-struct dpll_param {
- unsigned int m;
- unsigned int n;
- unsigned int fsel;
- unsigned int m2;
-};
-
-#ifdef CONFIG_OMAP36XX
-struct dpll_per_param {
- unsigned int sys_clk;
- unsigned int m;
- unsigned int n;
- unsigned int clkin;
- unsigned int sd;
- unsigned int dco;
- unsigned int m2;
- unsigned int m3;
- unsigned int m4;
- unsigned int m5;
- unsigned int m6;
- unsigned int m2div;
-};
-typedef struct dpll_per_param dpll_per_param;
-#define MAX_SIL_INDEX 1
-#else
-typedef struct dpll_param dpll_per_param;
-#define MAX_SIL_INDEX 3
-#endif
-
-typedef struct dpll_param dpll_param;
-
-/* Following functions are exported from lowlevel_init.S */
-extern dpll_param * get_mpu_dpll_param(void);
-extern dpll_param * get_core_dpll_param(void);
-extern dpll_param * get_per_dpll_param(void);
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init (void)
-{
- return 0;
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- int mode;
- mode = __raw_readl(CONTROL_STATUS) & (DEVICE_MASK);
- return(mode >>= 8);
-}
-
-/*****************************************************************
- * sr32 - clear & set a value in a bit range for a 32 bit address
- *****************************************************************/
-void sr32(u32 addr, u32 start_bit, u32 num_bits, u32 value)
-{
- u32 tmp, msk = 0;
- msk = 1 << num_bits;
- --msk;
- tmp = __raw_readl(addr) & ~(msk << start_bit);
- tmp |= value << start_bit;
- __raw_writel(tmp, addr);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- * volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
- u32 i = 0, val;
- do {
- ++i;
- val = __raw_readl(read_addr) & read_bit_mask;
- if (val == match_value)
- return (1);
- if (i == bound)
- return (0);
- } while (1);
-}
-
-#ifdef CFG_3430SDRAM_DDR
-/*********************************************************************
- * config_3430sdram_ddr() - Init DDR on 3430SDP dev board.
- *********************************************************************/
-void config_3430sdram_ddr(void)
-{
- /* check if its h/w or s/w reset for warm reset workaround */
- if (__raw_readl(PRM_RSTTST) & 0x2) {
- /* Enable SDRC clock & wait SDRC idle status to access*/
- sr32(CM_ICLKEN1_CORE, 1, 1, 0x1);
- wait_on_value(BIT1, 0, CM_IDLEST1_CORE, LDELAY);
- } else {
- /* do a SDRC reset between types to clear regs */
- __raw_writel(SOFTRESET, SDRC_SYSCONFIG);/* reset sdrc */
- /* wait on reset */
- wait_on_value(BIT0, BIT0, SDRC_STATUS, 12000000);
- __raw_writel(0, SDRC_SYSCONFIG);/* clear soft reset */
- }
- /* Clear reset sources */
- __raw_writel(0xfff, PRM_RSTTST);
-
- /* setup sdrc to ball mux */
- __raw_writel(SDP_SDRC_SHARING, SDRC_SHARING);
-
- /* Configure the first chip select */
- /* set mdcfg */
- __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_0);
-
- /* set timing */
- __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_0);
- __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_0);
- __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_0);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_0);
- delay(5000);
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_0);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_0);
-
- /* set mr0 */
- __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_0);
-#ifdef CONFIG_2GBDDR
- __raw_writel(SDP_SDRC_MDCFG_0_DDR, SDRC_MCFG_1);
-
- /* set timing */
- __raw_writel(SDP_SDRC_ACTIM_CTRLA_0, SDRC_ACTIM_CTRLA_1);
- __raw_writel(SDP_SDRC_ACTIM_CTRLB_0, SDRC_ACTIM_CTRLB_1);
- __raw_writel(SDP_SDRC_RFR_CTRL, SDRC_RFR_CTRL_1);
-
- /* init sequence for mDDR/mSDR using manual commands (DDR is different) */
- __raw_writel(CMD_NOP, SDRC_MANUAL_1);
- delay(5000);
- __raw_writel(CMD_PRECHARGE, SDRC_MANUAL_1);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
- __raw_writel(CMD_AUTOREFRESH, SDRC_MANUAL_1);
-
- /* set mr0 */
- __raw_writel(SDP_SDRC_MR_0_DDR, SDRC_MR_1);
-
- /* Configure cs1 to be just behind cs0 - 128meg boundary */
-#if defined(CONFIG_3430ZOOM2_512M) || \
- defined(CONFIG_3630ZOOM3) || defined(CONFIG_3630SDP)
- /* 2 * 128M = 256M for cs1 */
- __raw_writel(0x2, SDRC_CS_CFG);
-#elif defined(CONFIG_3630SDP_1G) || defined(CONFIG_3630ZOOM3_1G)
- /* 4 * 128M = 512M for cs1 */
- __raw_writel(0x4, SDRC_CS_CFG);
-#else
- /* 1 * 128M = 128M for cs1 */
- __raw_writel(0x1, SDRC_CS_CFG);
-#endif
-
- /* set up dllB-CS1 */
- __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLB_CTRL);
- delay(0x2000); /* give time to lock */
-#endif
-
- /* set up dllA-CS0 */
- __raw_writel(SDP_SDRC_DLLAB_CTRL, SDRC_DLLA_CTRL);
- delay(0x2000); /* give time to lock */
-
-}
-#endif // CFG_3430SDRAM_DDR
-
-/*************************************************************
- * get_sys_clk_speed - determine reference oscillator speed
- * based on known 32kHz clock and gptimer.
- *************************************************************/
-u32 get_osc_clk_speed(void)
-{
- u32 start, cstart, cend, cdiff, val;
-
- val = __raw_readl(PRM_CLKSRC_CTRL);
- /* If SYS_CLK is being divided by 2, remove for now */
- val = (val & (~BIT7)) | BIT6;
- __raw_writel(val, PRM_CLKSRC_CTRL);
-
- /* enable timer2 */
- val = __raw_readl(CM_CLKSEL_WKUP) | BIT0;
- __raw_writel(val, CM_CLKSEL_WKUP); /* select sys_clk for GPT1 */
-
- /* Enable I and F Clocks for GPT1 */
- val = __raw_readl(CM_ICLKEN_WKUP) | BIT0 | BIT2;
- __raw_writel(val, CM_ICLKEN_WKUP);
- val = __raw_readl(CM_FCLKEN_WKUP) | BIT0;
- __raw_writel(val, CM_FCLKEN_WKUP);
-
- __raw_writel(0, OMAP34XX_GPT1 + TLDR); /* start counting at 0 */
- __raw_writel(GPT_EN, OMAP34XX_GPT1 + TCLR); /* enable clock */
- /* enable 32kHz source *//* enabled out of reset */
- /* determine sys_clk via gauging */
-
- start = 20 + __raw_readl(S32K_CR); /* start time in 20 cycles */
- while (__raw_readl(S32K_CR) < start); /* dead loop till start time */
- cstart = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get start sys_clk count */
- while (__raw_readl(S32K_CR) < (start + 20)); /* wait for 40 cycles */
- cend = __raw_readl(OMAP34XX_GPT1 + TCRR); /* get end sys_clk count */
- cdiff = cend - cstart; /* get elapsed ticks */
-
- /* based on number of ticks assign speed */
- if (cdiff > 19000)
- return (S38_4M);
- else if (cdiff > 15200)
- return (S26M);
- else if (cdiff > 13000)
- return (S24M);
- else if (cdiff > 9000)
- return (S19_2M);
- else if (cdiff > 7600)
- return (S13M);
- else
- return (S12M);
-}
-
-/******************************************************************************
- * get_sys_clkin_sel() - returns the sys_clkin_sel field value based on
- * -- input oscillator clock frequency.
- *
- *****************************************************************************/
-void get_sys_clkin_sel(u32 osc_clk, u32 *sys_clkin_sel)
-{
- if(osc_clk == S38_4M)
- *sys_clkin_sel= 4;
- else if(osc_clk == S26M)
- *sys_clkin_sel = 3;
- else if(osc_clk == S19_2M)
- *sys_clkin_sel = 2;
- else if(osc_clk == S13M)
- *sys_clkin_sel = 1;
- else if(osc_clk == S12M)
- *sys_clkin_sel = 0;
-}
-
-static dpll_per_param *_get_per_dpll(int clk_index)
-{
- dpll_per_param *ret = (dpll_per_param *)get_per_dpll_param();
- ret += clk_index;
- return ret;
-}
-
-static dpll_param *_get_mpu_dpll(int clk_index, int sil_index)
-{
- dpll_param *ret = (dpll_param *)get_mpu_dpll_param();
- ret += (MAX_SIL_INDEX * clk_index) + sil_index;
- return ret;
-}
-
-#ifdef CONFIG_OMAP36XX
-
-#define PER_M_BITS 12
-#define PER_M2_BITS 5
-#define PER_M3_BITS 6
-#define PER_M4_BITS 6
-#define PER_M5_BITS 6
-#define PER_M6_BITS 6
-
-static void per_dpll_init_36XX(int clk_index)
-{
- dpll_per_param *per;
-
- per = _get_per_dpll(clk_index);
-
- sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
- wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
-
- sr32(CM_CLKSEL2_PLL, 8, PER_M_BITS, per->m);
- sr32(CM_CLKSEL2_PLL, 0, 7, per->n);
- sr32(PRM_CLKSRC_CTRL, 8, 1, per->clkin);
- sr32(CM_CLKSEL2_PLL, 24, 7, per->sd);
- sr32(CM_CLKSEL2_PLL, 21, 3, per->dco);
- sr32(CM_CLKSEL3_PLL, 0, PER_M2_BITS, per->m2);
- sr32(CM_CLKSEL_DSS, 8, PER_M3_BITS, per->m3);
- sr32(CM_CLKSEL_DSS, 0, PER_M4_BITS, per->m4);
- sr32(CM_CLKSEL_CAM, 0, PER_M5_BITS, per->m5);
- sr32(CM_CLKSEL1_EMU, 24, PER_M6_BITS, per->m6);
- sr32(CM_CLKSEL_CORE, 12, 2, per->m2div);
-
- sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
-}
-
-static void mpu_dpll_init_36XX(int clk_index, int sil_index)
-{
- dpll_param *mpu;
-
- mpu = _get_mpu_dpll(clk_index, sil_index);
-
- /* MPU DPLL (unlocked already) */
- sr32(CM_CLKSEL1_PLL_MPU, 8, 11, mpu->m);
- sr32(CM_CLKSEL1_PLL_MPU, 0, 7, mpu->n);
- sr32(CM_CLKSEL2_PLL_MPU, 0, 5, mpu->m2);
-
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
-}
-
-#else /* 34xx */
-
-#define PER_M_BITS 11
-#define PER_M2_BITS 5
-#define PER_M3_BITS 5
-#define PER_M4_BITS 5
-#define PER_M5_BITS 5
-#define PER_M6_BITS 5
-
-static void per_dpll_init_34XX(int clk_index)
-{
- dpll_per_param *dpll_param_p;
-
- /* Getting the base address to PER DPLL param table*/
- dpll_param_p = (dpll_param *)get_per_dpll_param();
- /* Moving it to the right sysclk base */
- dpll_param_p = dpll_param_p + clk_index;
- /* PER DPLL */
- sr32(CM_CLKEN_PLL, 16, 3, PLL_STOP);
- wait_on_value(BIT1, 0, CM_IDLEST_CKGEN, LDELAY);
- sr32(CM_CLKSEL1_EMU, 24, 5, PER_M6X2); /* set M6 */
- sr32(CM_CLKSEL_CAM, 0, 5, PER_M5X2); /* set M5 */
- sr32(CM_CLKSEL_DSS, 0, 5, PER_M4X2); /* set M4 */
- sr32(CM_CLKSEL_DSS, 8, 5, PER_M3X2); /* set M3 */
- sr32(CM_CLKSEL3_PLL, 0, 5, dpll_param_p->m2); /* set M2 */
- sr32(CM_CLKSEL2_PLL, 8, 11, dpll_param_p->m); /* set m */
- sr32(CM_CLKSEL2_PLL, 0, 7, dpll_param_p->n); /* set n */
- sr32(CM_CLKEN_PLL, 20, 4, dpll_param_p->fsel);/* FREQSEL */
- sr32(CM_CLKEN_PLL, 16, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT1, 2, CM_IDLEST_CKGEN, LDELAY);
-}
-
-static void mpu_dpll_init_34XX(int clk_index, int sil_index)
-{
- dpll_param *dpll_param_p;
-
- /* Getting the base address to MPU DPLL param table*/
- dpll_param_p = (dpll_param *)get_mpu_dpll_param();
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index;
- /* MPU DPLL (unlocked already) */
- sr32(CM_CLKSEL2_PLL_MPU, 0, 5, dpll_param_p->m2); /* Set M2 */
- sr32(CM_CLKSEL1_PLL_MPU, 8, 11, dpll_param_p->m); /* Set M */
- sr32(CM_CLKSEL1_PLL_MPU, 0, 7, dpll_param_p->n); /* Set N */
- sr32(CM_CLKEN_PLL_MPU, 4, 4, dpll_param_p->fsel); /* FREQSEL */
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_PLL_MPU, LDELAY);
-}
-
-#endif
-
-/******************************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * -- called from SRAM, or Flash (using temp SRAM stack).
- *****************************************************************************/
-void prcm_init(void)
-{
- u32 osc_clk=0, sys_clkin_sel;
- dpll_param *dpll_param_p;
- u32 clk_index, sil_index;
-
- /* Gauge the input clock speed and find out the sys_clkin_sel
- * value corresponding to the input clock.
- */
- osc_clk = get_osc_clk_speed();
- get_sys_clkin_sel(osc_clk, &sys_clkin_sel);
-
- sr32(PRM_CLKSEL, 0, 3, sys_clkin_sel); /* set input crystal speed */
-
-/* Using 26MHz divider straight into OMAP saves ~2ms on OFF mode restore */
-#if 0
- /* If the input clock is greater than 19.2M always divide/2 */
- if(sys_clkin_sel > 2) {
- sr32(PRM_CLKSRC_CTRL, 6, 2, 2);/* input clock divider */
- clk_index = sys_clkin_sel/2;
- } else
-#endif
- {
- sr32(PRM_CLKSRC_CTRL, 6, 2, 1);/* input clock divider */
- clk_index = sys_clkin_sel;
- }
-
- sr32(PRM_CLKSRC_CTRL, 0, 2, 0);/* Bypass mode: T2 inputs a square clock */
-
- /* The DPLL tables are defined according to sysclk value and
- * silicon revision. The clk_index value will be used to get
- * the values for that input sysclk from the DPLL param table
- * and sil_index will get the values for that SysClk for the
- * appropriate silicon rev.
- */
-#ifdef CONFIG_OMAP36XX
- sil_index = 0;
-#else
- if(cpu_is_3410())
- sil_index = 2;
- else {
- if(get_cpu_rev() == CPU_3XX_ES10)
- sil_index = 0;
- else if(get_cpu_rev() >= CPU_3XX_ES20)
- sil_index = 1;
- }
-#endif
-
- /* Unlock MPU DPLL (slows things down, and needed later) */
- sr32(CM_CLKEN_PLL_MPU, 0, 3, PLL_LOW_POWER_BYPASS);
- wait_on_value(BIT0, 0, CM_IDLEST_PLL_MPU, LDELAY);
-
- /* Getting the base address of Core DPLL param table*/
- dpll_param_p = (dpll_param *)get_core_dpll_param();
- /* Moving it to the right sysclk and ES rev base */
- dpll_param_p = dpll_param_p + MAX_SIL_INDEX*clk_index + sil_index;
- /* CORE DPLL */
- /* sr32(CM_CLKSEL2_EMU) set override to work when asleep */
- sr32(CM_CLKEN_PLL, 0, 3, PLL_FAST_RELOCK_BYPASS);
- wait_on_value(BIT0, 0, CM_IDLEST_CKGEN, LDELAY);
- /* For 3430 ES1.0 Errata 1.50, default value directly doesnt
- work. write another value and then default value. */
- sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2 + 1); /* m3x2 */
- sr32(CM_CLKSEL1_EMU, 16, 5, CORE_M3X2); /* m3x2 */
- sr32(CM_CLKSEL1_PLL, 27, 2, dpll_param_p->m2); /* Set M2 */
- sr32(CM_CLKSEL1_PLL, 16, 11, dpll_param_p->m); /* Set M */
- sr32(CM_CLKSEL1_PLL, 8, 7, dpll_param_p->n); /* Set N */
- sr32(CM_CLKSEL1_PLL, 6, 1, 0); /* 96M Src */
- sr32(CM_CLKSEL_CORE, 8, 4, CORE_SSI_DIV); /* ssi */
- sr32(CM_CLKSEL_CORE, 4, 2, CORE_FUSB_DIV); /* fsusb ES1 only */
- sr32(CM_CLKSEL_CORE, 2, 2, CORE_L4_DIV); /* l4 */
- sr32(CM_CLKSEL_CORE, 0, 2, CORE_L3_DIV); /* l3 */
- sr32(CM_CLKSEL_GFX, 0, 3, GFX_DIV); /* gfx */
- sr32(CM_CLKSEL_WKUP, 1, 2, WKUP_RSM); /* reset mgr */
- sr32(CM_CLKEN_PLL, 4, 4, dpll_param_p->fsel); /* FREQSEL */
- sr32(CM_CLKEN_PLL, 0, 3, PLL_LOCK); /* lock mode */
- wait_on_value(BIT0, 1, CM_IDLEST_CKGEN, LDELAY);
-
- /* PER DPLL */
-#ifdef CONFIG_OMAP36XX
- per_dpll_init_36XX(clk_index);
- mpu_dpll_init_36XX(clk_index, sil_index);
-#else
- per_dpll_init_34XX(clk_index);
- mpu_dpll_init_34XX(clk_index, sil_index);
-#endif
-
- /* Set up GPTimers to sys_clk source only */
- sr32(CM_CLKSEL_PER, 0, 8, 0xff);
- sr32(CM_CLKSEL_WKUP, 0, 1, 1);
-
- delay(5000);
-}
-
-/*****************************************
- * Routine: secure_unlock
- * Description: Setup security registers for access
- * (GP Device only)
- *****************************************/
-void secure_unlock(void)
-{
- /* Permission values for registers -Full fledged permissions to all */
- #define UNLOCK_1 0xFFFFFFFF
- #define UNLOCK_2 0x00000000
- #define UNLOCK_3 0x0000FFFF
- /* Protection Module Register Target APE (PM_RT)*/
- __raw_writel(UNLOCK_1, RT_REQ_INFO_PERMISSION_1);
- __raw_writel(UNLOCK_1, RT_READ_PERMISSION_0);
- __raw_writel(UNLOCK_1, RT_WRITE_PERMISSION_0);
- __raw_writel(UNLOCK_2, RT_ADDR_MATCH_1);
-
- __raw_writel(UNLOCK_3, GPMC_REQ_INFO_PERMISSION_0);
- __raw_writel(UNLOCK_3, GPMC_READ_PERMISSION_0);
- __raw_writel(UNLOCK_3, GPMC_WRITE_PERMISSION_0);
-
- __raw_writel(UNLOCK_3, OCM_REQ_INFO_PERMISSION_0);
- __raw_writel(UNLOCK_3, OCM_READ_PERMISSION_0);
- __raw_writel(UNLOCK_3, OCM_WRITE_PERMISSION_0);
- __raw_writel(UNLOCK_2, OCM_ADDR_MATCH_2);
-
- __raw_writel(UNLOCK_1, SMS_RG_ATT0); /* SDRC region 0 public */
-}
-
-/**********************************************************
- * Routine: try_unlock_sram()
- * Description: If chip is GP type, unlock the SRAM for
- * general use.
- ***********************************************************/
-void try_unlock_memory(void)
-{
- int mode;
-
- /* if GP device unlock device SRAM for general use */
- /* secure code breaks for Secure/Emulation device - HS/E/T*/
- mode = get_device_type();
- if (mode == GP_DEVICE) {
- secure_unlock();
- }
- return;
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called at time when only stack is available.
- **********************************************************/
-
-void s_init(void)
-{
- watchdog_init();
-#ifdef CONFIG_3430_AS_3410
- /* setup the scalability control register for
- * 3430 to work in 3410 mode
- */
- __raw_writel(0x5ABF,CONTROL_SCALABLE_OMAP_OCP);
-#endif
- try_unlock_memory();
- set_muxconf_regs();
- delay(100);
- prcm_init();
- per_clocks_enable();
- config_3430sdram_ddr();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r (void)
-{
- return(0);
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
- int pending = 1;
- do {
- pending = __raw_readl(wd_base + WWPS);
- } while (pending);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
- /* There are 3 watch dogs WD1=Secure, WD2=MPU, WD3=IVA. WD1 is
- * either taken care of by ROM (HS/EMU) or not accessible (GP).
- * We need to take care of WD2-MPU or take a PRCM reset. WD3
- * should not be running and does not generate a PRCM reset.
- */
- sr32(CM_FCLKEN_WKUP, 5, 1, 1);
- sr32(CM_ICLKEN_WKUP, 5, 1, 1);
- wait_on_value(BIT5, 0x20, CM_IDLEST_WKUP, 5); /* some issue here */
-
- __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
- wait_for_command_complete(WD2_BASE);
- __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init (void)
-{
- return 0;
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void per_clocks_enable(void)
-{
- /* Enable GP2 timer. */
- sr32(CM_CLKSEL_PER, 0, 1, 0x1); /* GPT2 = sys clk */
- sr32(CM_ICLKEN_PER, 3, 1, 0x1); /* ICKen GPT2 */
- sr32(CM_FCLKEN_PER, 3, 1, 0x1); /* FCKen GPT2 */
-
-#ifdef CFG_NS16550
-////#ifdef CONFIG_SERIAL3
- sr32(CM_FCLKEN_PER, 11, 1, 0x1);
- sr32(CM_ICLKEN_PER, 11, 1, 0x1);
-////#else
- /* Enable UART1 clocks */
- sr32(CM_FCLKEN1_CORE, 13, 1, 0x1);
- sr32(CM_ICLKEN1_CORE, 13, 5, 0x1);
-////#endif
-#endif
- // hns: enable clock for GPIO2-6 http://e2e.ti.com/support/dsp/omap_applications_processors/f/447/p/65520/236545.aspx
- sr32(CM_FCLKEN_PER, 13, 5, 0x1f);
- sr32(CM_ICLKEN_PER, 13, 5, 0x1f);
- // hns: and GPIO1
- sr32(CM_FCLKEN_WKUP, 3, 1, 0x1);
- sr32(CM_ICLKEN_WKUP, 3, 1, 0x1);
- delay(1000);
-}
-
-/* Set MUX for UART, GPMC, SDRC, GPIO */
-
-#define MUX_VAL(OFFSET,VALUE)\
- __raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-
-#define CP(x) (CONTROL_PADCONF_##x)
-/*
- * IEN - Input Enable
- * IDIS - Input Disable
- * PTD - Pull type Down
- * PTU - Pull type Up
- * DIS - Pull type selection is inactive
- * EN - Pull type selection is active
- * M0 - Mode 0
- * The commented string gives the final mux configuration for that pin
- */
-#define MUX_DEFAULT()\
- /*SDRC*/\
- MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /*SDRC_D0*/\
- MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /*SDRC_D1*/\
- MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /*SDRC_D2*/\
- MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /*SDRC_D3*/\
- MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /*SDRC_D4*/\
- MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /*SDRC_D5*/\
- MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /*SDRC_D6*/\
- MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /*SDRC_D7*/\
- MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /*SDRC_D8*/\
- MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /*SDRC_D9*/\
- MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /*SDRC_D10*/\
- MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /*SDRC_D11*/\
- MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /*SDRC_D12*/\
- MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /*SDRC_D13*/\
- MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /*SDRC_D14*/\
- MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /*SDRC_D15*/\
- MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /*SDRC_D16*/\
- MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /*SDRC_D17*/\
- MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /*SDRC_D18*/\
- MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /*SDRC_D19*/\
- MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /*SDRC_D20*/\
- MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /*SDRC_D21*/\
- MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /*SDRC_D22*/\
- MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /*SDRC_D23*/\
- MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /*SDRC_D24*/\
- MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /*SDRC_D25*/\
- MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /*SDRC_D26*/\
- MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /*SDRC_D27*/\
- MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /*SDRC_D28*/\
- MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /*SDRC_D29*/\
- MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /*SDRC_D30*/\
- MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /*SDRC_D31*/\
- MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /*SDRC_CLK*/\
- MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /*SDRC_DQS0*/\
- MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /*SDRC_DQS1*/\
- MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /*SDRC_DQS2*/\
- MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /*SDRC_DQS3*/\
- /*GPMC*/\
- MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
- MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
- MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
- MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
- MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
- MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
- MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
- MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
- MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
- MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
- MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /*GPMC_D0*/\
- MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /*GPMC_D1*/\
- MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /*GPMC_D2*/\
- MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /*GPMC_D3*/\
- MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /*GPMC_D4*/\
- MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /*GPMC_D5*/\
- MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /*GPMC_D6*/\
- MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /*GPMC_D7*/\
- MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /*GPMC_D8*/\
- MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /*GPMC_D9*/\
- MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /*GPMC_D10*/\
- MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /*GPMC_D11*/\
- MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /*GPMC_D12*/\
- MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /*GPMC_D13*/\
- MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\
- MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\
- MUX_VAL(CP(GPMC_nCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\
- MUX_VAL(CP(GPMC_nCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\
- MUX_VAL(CP(GPMC_nCS2), (IDIS | PTU | EN | M0)) /*GPMC_nCS2*/\
- MUX_VAL(CP(GPMC_nCS3), (IDIS | PTU | EN | M0)) /*GPMC_nCS3*/\
- MUX_VAL(CP(GPMC_nCS4), (IDIS | PTU | EN | M0)) /*GPMC_nCS4 lab*/\
- MUX_VAL(CP(GPMC_nCS5), (IDIS | PTD | DIS | M0)) /*GPMC_nCS5 lab*/\
-MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/\
- MUX_VAL(CP(GPMC_nCS7), (IEN | PTU | EN | M1)) /*GPMC_IO_DIR lab*/\
- MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
- MUX_VAL(CP(GPMC_nADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\
- MUX_VAL(CP(GPMC_nOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
- MUX_VAL(CP(GPMC_nWE), (IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
- MUX_VAL(CP(GPMC_nBE0_CLE), (IDIS | PTD | DIS | M0)) /*GPMC_nBE0_CLE*/\
- MUX_VAL(CP(GPMC_nBE1), (IEN | PTD | DIS | M0)) /*GPMC_nBE1 lab*/\
- MUX_VAL(CP(GPMC_nWP), (IEN | PTD | DIS | M0)) /*GPMC_nWP*/\
- MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /*GPMC_WAIT0*/\
- MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M0)) /*GPMC_WAIT1*/\
- MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\
- MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M0)) /*gpmc_nWait lab*/\
- MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
- MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
- MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
- MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
- MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\
- MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /*UART1_TX*/\
- MUX_VAL(CP(UART1_RTS), (IDIS | PTD | DIS | M0)) /*UART1_RTS*/\
- MUX_VAL(CP(UART1_CTS), (IEN | PTU | DIS | M0)) /*UART1_CTS*/\
- MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /*UART1_RX*/\
- MUX_VAL(CP(McBSP1_DX), (IEN | PTD | DIS | M4)) /*GPIO_158*/\
- MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /*SYS_32K*/\
- MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /*GPIO_2 */\
- MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /*GPIO_3 */\
- MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /*GPIO_4 */\
- MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /*GPIO_5 */\
- MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /*GPIO_6 */\
- MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /*GPIO_7 */\
- MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /*GPIO_8 */\
- MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\
- MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTD | DIS | M0)) /*sys_clkout2 lab*/\
- MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) /*JTAG_nTRST*/\
- MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0)) /*JTAG_TCK*/\
- MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0)) /*JTAG_TMS*/\
- MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0)) /*JTAG_TDI*/\
- MUX_VAL(CP(JTAG_EMU0), (IEN | PTD | DIS | M0)) /*JTAG_EMU0*/\
- MUX_VAL(CP(JTAG_EMU1), (IEN | PTD | DIS | M0)) /*JTAG_EMU1*/\
- MUX_VAL(CP(ETK_CLK), (IEN | PTD | DIS | M4)) /*GPIO_12*/\
-MUX_VAL(CP(ETK_CTL), (IEN | PTU | DIS | M4)) /*GPIO_13*/\
- MUX_VAL(CP(ETK_D0 ), (IEN | PTD | DIS | M4)) /*GPIO_14*/\
- MUX_VAL(CP(ETK_D1 ), (IEN | PTD | DIS | M4)) /*GPIO_15*/\
- MUX_VAL(CP(ETK_D2 ), (IEN | PTD | DIS | M4)) /*GPIO_16*/\
- MUX_VAL(CP(ETK_D10), (IEN | PTD | DIS | M4)) /*GPIO_24*/\
- MUX_VAL(CP(ETK_D11), (IEN | PTD | DIS | M4)) /*GPIO_25*/\
- MUX_VAL(CP(ETK_D12), (IEN | PTD | DIS | M4)) /*GPIO_26*/\
- MUX_VAL(CP(ETK_D13), (IEN | PTD | DIS | M4)) /*GPIO_27*/\
- MUX_VAL(CP(ETK_D14), (IEN | PTD | DIS | M4)) /*GPIO_28*/\
- MUX_VAL(CP(ETK_D15), (IEN | PTD | DIS | M4)) /*GPIO_29*/\
-MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTD | EN | M0)) /*UART3_CTS_RCTX */\
-MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTD | DIS | M0)) /*UART3_RTS_SD */\
- MUX_VAL(CP(UART3_RX_IRRX ), (IEN | PTD | DIS | M0)) /*UART3_RX_IRRX*/\
- MUX_VAL(CP(UART3_TX_IRTX ), (IDIS | PTD | DIS | M0)) /*UART3_TX_IRTX*/\
- MUX_VAL(CP(sdrc_cke0), (IDIS | PTU | EN | M0)) /*sdrc_cke0 */\
- MUX_VAL(CP(sdrc_cke1), (IDIS | PTD | DIS | M7)) /*sdrc_cke1 not used*/
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- * specific to the hardware. Many pins need
- * to be moved from protect to primary mode.
- *********************************************************/
-void set_muxconf_regs(void)
-{
- MUX_DEFAULT();
-#ifdef CONFIG_2GBDDR
- MUX_VAL(CP(sdrc_cke1), (IDIS | PTU | EN | M0)) /*sdrc_cke1 */
-#endif
-}
-
-/**********************************************************
- * Routine: nand+_init
- * Description: Set up nand for nand and jffs2 commands
- *********************************************************/
-int nand_init(void)
-{
- /* global settings */
- __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
- __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(0, GPMC_TIMEOUT_CONTROL);/* timeout disable */
-#ifdef CFG_NAND
- __raw_writel(0x001, GPMC_CONFIG); /* set nWP, disable limited addr */
-#endif
-
- /* setup CS0 for Micron NAND, leave other CS's to u-boot */
- __raw_writel(0 , GPMC_CONFIG7 + GPMC_CONFIG_CS0);
- delay(1000);
-
-#ifdef CFG_NAND
- __raw_writel( M_NAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0);
- __raw_writel( M_NAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0);
-
-#elif CFG_ONENAND /* CFG_ONENAND */
- __raw_writel( ONENAND_GPMC_CONFIG1, GPMC_CONFIG1 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG2, GPMC_CONFIG2 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG3, GPMC_CONFIG3 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG4, GPMC_CONFIG4 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG5, GPMC_CONFIG5 + GPMC_CONFIG_CS0);
- __raw_writel( ONENAND_GPMC_CONFIG6, GPMC_CONFIG6 + GPMC_CONFIG_CS0);
-#endif
-
- /* Enable the GPMC Mapping */
- __raw_writel(( ((OMAP34XX_GPMC_CS0_SIZE & 0xF)<<8) |
- ((OMAP34XX_GPMC_CS0_MAP>>24) & 0x3F) |
- (1<<6) ), (GPMC_CONFIG7 + GPMC_CONFIG_CS0));
- delay(2000);
-
-#ifdef CFG_NAND
- if (nand_chip()){
-#ifdef CFG_PRINTF
- printf("Unsupported Chip!\n");
-#endif
- return 1;
- }
-#elif CFG_ONENAND
- if (onenand_chip()){
-#ifdef CFG_PRINTF
- printf("OneNAND Unsupported !\n");
-#endif
- return 1;
- }
-#endif
- return 0;
-}
-
-/* optionally do something like blinking LED */
-void board_hang (void)
-{
- while (1) {
- printf("X-Loader hangs\n");
- }
-}
diff --git a/uart-monitor/board/omap3430labrador/platform.S b/uart-monitor/board/omap3430labrador/platform.S
deleted file mode 100644
index 42dfc72..0000000
--- a/uart-monitor/board/omap3430labrador/platform.S
+++ /dev/null
@@ -1,218 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2004-2006
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
-
-#if !defined(CFG_NAND_BOOT) && !defined(CFG_NAND_BOOT)
-/**************************************************************************
- * cpy_clk_code: relocates clock code into SRAM where its safer to execute
- * R1 = SRAM destination address.
- *************************************************************************/
-.global cpy_clk_code
- cpy_clk_code:
- /* Copy DPLL code into SRAM */
- adr r0, go_to_speed /* get addr of clock setting code */
- mov r2, #384 /* r2 size to copy (div by 32 bytes) */
- mov r1, r1 /* r1 <- dest address (passed in) */
- add r2, r2, r0 /* r2 <- source end address */
-next2:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next2
- mov pc, lr /* back to caller */
-
-/* ****************************************************************************
- * NOTE: 3430 X-loader currently does not use this code.
-* It could be removed its is kept for compatabily with u-boot.
- *
- * go_to_speed: -Moves to bypass, -Commits clock dividers, -puts dpll at speed
- * -executed from SRAM.
- * R0 = CM_CLKEN_PLL-bypass value
- * R1 = CM_CLKSEL1_PLL-m, n, and divider values
- * R2 = CM_CLKSEL_CORE-divider values
- * R3 = CM_IDLEST_CKGEN - addr dpll lock wait
- *
- * Note: If core unlocks/relocks and SDRAM is running fast already it gets
- * confused. A reset of the controller gets it back. Taking away its
- * L3 when its not in self refresh seems bad for it. Normally, this code
- * runs from flash before SDR is init so that should be ok.
- ******************************************************************************/
-.global go_to_speed
- go_to_speed:
- stmfd sp!, {r4-r6}
-
- /* move into fast relock bypass */
- ldr r4, pll_ctl_add
- str r0, [r4]
-wait1:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- beq wait1 /* if lock, loop */
-
- /* set new dpll dividers _after_ in bypass */
- ldr r5, pll_div_add1
- str r1, [r5] /* set m, n, m2 */
- ldr r5, pll_div_add2
- str r2, [r5] /* set l3/l4/.. dividers*/
- ldr r5, pll_div_add3 /* wkup */
- ldr r2, pll_div_val3 /* rsm val */
- str r2, [r5]
- ldr r5, pll_div_add4 /* gfx */
- ldr r2, pll_div_val4
- str r2, [r5]
- ldr r5, pll_div_add5 /* emu */
- ldr r2, pll_div_val5
- str r2, [r5]
-
- /* now prepare GPMC (flash) for new dpll speed */
- /* flash needs to be stable when we jump back to it */
- ldr r5, flash_cfg3_addr
- ldr r2, flash_cfg3_val
- str r2, [r5]
- ldr r5, flash_cfg4_addr
- ldr r2, flash_cfg4_val
- str r2, [r5]
- ldr r5, flash_cfg5_addr
- ldr r2, flash_cfg5_val
- str r2, [r5]
- ldr r5, flash_cfg1_addr
- ldr r2, [r5]
- orr r2, r2, #0x3 /* up gpmc divider */
- str r2, [r5]
-
- /* lock DPLL3 and wait a bit */
- orr r0, r0, #0x7 /* set up for lock mode */
- str r0, [r4] /* lock */
- nop /* ARM slow at this point working at sys_clk */
- nop
- nop
- nop
-wait2:
- ldr r5, [r3] /* get status */
- and r5, r5, #0x1 /* isolate core status */
- cmp r5, #0x1 /* still locked? */
- bne wait2 /* if lock, loop */
- nop
- nop
- nop
- nop
- ldmfd sp!, {r4-r6}
- mov pc, lr /* back to caller, locked */
-
-_go_to_speed: .word go_to_speed
-
-/* these constants need to be close for PIC code */
-/* The Nor has to be in the Flash Base CS0 for this condition to happen */
-flash_cfg1_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG1)
-flash_cfg3_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG3)
-flash_cfg3_val:
- .word STNOR_GPMC_CONFIG3
-flash_cfg4_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG4)
-flash_cfg4_val:
- .word STNOR_GPMC_CONFIG4
-flash_cfg5_val:
- .word STNOR_GPMC_CONFIG5
-flash_cfg5_addr:
- .word (GPMC_CONFIG_CS0 + GPMC_CONFIG5)
-pll_ctl_add:
- .word CM_CLKEN_PLL
-pll_div_add1:
- .word CM_CLKSEL1_PLL
-pll_div_add2:
- .word CM_CLKSEL_CORE
-pll_div_add3:
- .word CM_CLKSEL_WKUP
-pll_div_val3:
- .word (WKUP_RSM << 1)
-pll_div_add4:
- .word CM_CLKSEL_GFX
-pll_div_val4:
- .word (GFX_DIV << 0)
-pll_div_add5:
- .word CM_CLKSEL1_EMU
-pll_div_val5:
- .word CLSEL1_EMU_VAL
-
-#endif
-
-.globl lowlevel_init
-lowlevel_init:
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll,mux,memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-REG_CONTROL_STATUS:
- .word CONTROL_STATUS
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
-
-.globl get_mpu_dpll_param
-get_mpu_dpll_param:
- adr r0, mpu_dpll_param
- mov pc, lr
-
-.globl get_iva_dpll_param
-get_iva_dpll_param:
- adr r0, iva_dpll_param
- mov pc, lr
-
-.globl get_core_dpll_param
-get_core_dpll_param:
- adr r0, core_dpll_param
- mov pc, lr
-
-.globl get_per_dpll_param
-get_per_dpll_param:
- adr r0, per_dpll_param
- mov pc, lr
-
-#if defined(CONFIG_OMAP36XX)
-#include <asm/arch/dpll_table_36xx.S>
-#elif defined(CONFIG_OMAP34XX)
-#include <asm/arch/dpll_table_34xx.S>
-#else
-#error "DPLL Table is undefined"
-#endif \ No newline at end of file
diff --git a/uart-monitor/common/Makefile b/uart-monitor/common/Makefile
deleted file mode 100644
index de856cf..0000000
--- a/uart-monitor/common/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = libcommon.a
-
-AOBJS =
-
-COBJS = cmd_load.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-CPPFLAGS += -I..
-
-all: $(LIB) $(AOBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/common/cmd_load.c b/uart-monitor/common/cmd_load.c
deleted file mode 100644
index 0115b46..0000000
--- a/uart-monitor/common/cmd_load.c
+++ /dev/null
@@ -1,325 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Serial up- and download support
- */
-#include <common.h>
-#include <asm/arch/mux.h>
-
-#define putc serial_putc
-#define tstc serial_tstc
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-static inline void udelay(unsigned long us)
-{
- delay(us * 200); /* approximate */
-}
-
-static gpio_t *blocks[]={ // GPIO1 .. 6
- OMAP34XX_GPIO1_BASE,
- OMAP34XX_GPIO2_BASE,
- OMAP34XX_GPIO3_BASE,
- OMAP34XX_GPIO4_BASE,
- OMAP34XX_GPIO5_BASE,
- OMAP34XX_GPIO6_BASE
-};
-
-static inline int gpio_get(int n)
-{
- int bit=n % 32;
- gpio_t *base=blocks[n/32];
- return (base->datain >> bit)&1;
-}
-
-static inline int gpio_is_input(int n)
-{ // geht nicht richtig
- int bit=n % 32;
- gpio_t *base=blocks[n/32];
- return (base->oe >> bit)&1;
-}
-
-#ifdef CFG_CMD_FAT
-extern void * memcpy(void * dest,const void *src,size_t count);
-#else
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-#endif
-
-
-int strcmp(char *s1, char *s2)
-{
- while(*s1 == *s2) {
- if(*s1 == 0)
- return 0; // same
- s1++;
- s2++;
- }
- return *s1 > *s2?1:-1;
-}
-
-long xtol(char *s)
-{
- long val=0;
- while(1)
- {
- if(*s >= '0' && *s <= '9')
- val=16*val+(*s++-'0');
- else if(*s >= 'A' && *s <= 'F')
- val=16*val+(*s++-'A'+10);
- else if(*s >= 'a' && *s <= 'f')
- val=16*val+(*s++-'a'+10);
- else
- break;
- }
- return val;
-}
-
-static char *addr=(char *) CFG_LOADADDR;
-static char line[100];
-static char *argv[10];
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-
-#define MUX_VAL(OFFSET,VALUE)\
-__raw_writew((VALUE), OMAP34XX_CTRL_BASE + (OFFSET));
-
-#define CP(x) (CONTROL_PADCONF_##x)
-
-void testfn(void)
-{ // code can be copied to SDRAM (assuming that it is position-independent!)
- int i;
- for(i=0; i<10; i++) {
- if(i & 1)
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/
- else
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- }
-}
-
-int do_load_serial_bin (ulong offset, int baudrate)
-{ // add testing code here
- int i=0;
- while(0)
- {
- printf("hello world\n");
- // testfn();
- }
- while(1) {
- char *c;
- int argc=0;
- int pos=0;
- printf ("$ ");
- while(1) {
- line[pos]=getc();
- switch(line[pos]) {
- case '\b':
- case 0x7f:
- if(pos > 0) {
- putc('\b');
- pos--;
- }
- continue;
- case 0:
- case '\n':
- continue; // ignore
- case '\r':
- break; // command
- default:
- if(pos < sizeof(line)/sizeof(line[0])) {
- putc(line[pos]);
- pos++;
- }
- continue;
- }
- line[pos]=0;
- printf("\n");
- break;
- }
- c=line;
- while(argc < sizeof(argv)/sizeof(argv[0])) {
- while (*c == ' ' || *c == '\t')
- c++;
- if(*c == 0)
- break;
- argv[argc]=c;
- while(*c != 0 && *c != '\t' && *c != ' ')
- c++;
- argc++;
- if(*c == 0)
- break;
- *c=0; // substitute
- c++;
- }
- if(argc == 0)
- continue; // empty line
-// printf("argc=%d argv[0]=%s\n", argc, argv[0]);
- if(strcmp(argv[0], "c") == 0) { // c - copy test function to SDRAM and execute
- void (*fn)(void) = &testfn;
- size_t cnt = 0x1000;
- addr=(char *) CFG_LOADADDR;
- printf("%08x (%d) --> %08x\n", fn, cnt, addr);
- memcpy(addr, fn, cnt);
- (*fn)();
- }
- else if(strcmp(argv[0], "x") == 0) { // x [addr] - execute code
- void (*fn)(void) = addr;
- if(argc > 1)
- fn = (void *) xtol(argv[1]);
- (*fn)();
- }
- else if(strcmp(argv[0], "l") == 0) { // l - loop
- int d=1;
- while(1)
- printf ("Welcome to uart-monitor (%d)\n", d++), udelay(500*1000);
- }
- else if(strcmp(argv[0], "ram") == 0) {
- int val=0x55;
- if(argc == 2)
- val=xtol(argv[1]);
- for(addr=(char *) CFG_LOADADDR; addr < 256+(char *) CFG_LOADADDR; addr++) {
- *addr=val++;
- }
- addr=(char *) CFG_LOADADDR;
- }
- else if(strcmp(argv[0], "a") == 0) { // a [addr]
- if(argc > 1)
- addr=(char *) xtol(argv[1]);
- printf("%08x\n", addr);
- }
- else if(strcmp(argv[0], "r") == 0) { // r [size]
- int i;
- int n=1;
- if(argc > 1)
- n=xtol(argv[1]);
- printf("%08x:", addr);
- for(i=0; i<n; i++) {
- printf(" %02x", *addr++);
- if(i % 16 == 15 && i != n-1)
- printf("\n%08x:", addr);
- }
- printf("\n");
- }
- else if(strcmp(argv[0], "rl") == 0) { // rl [size]
- int i;
- int n=1;
- if(argc > 1)
- n=xtol(argv[1]);
- printf("%08x:", addr);
- for(i=0; i<n; i++) {
- printf(" %08x", *(volatile unsigned int *) addr);
- addr+=4;
- if(i % 4 == 3 && i != n-1)
- printf("\n%08x:", addr);
- }
- printf("\n");
- }
- else if(strcmp(argv[0], "f") == 0) { // f [value [size]]
- int i;
- int n=1;
- int val=0x55;
- if(argc > 1)
- val=xtol(argv[1]);
- if(argc > 2)
- n=xtol(argv[2]);
- for(i=0; i<n; i++)
- addr[i]=val;
- }
-#if 0
- else if(strcmp(argv[0], "clk") == 0) { // clk
- extern u32 osc_clk;
- printf("clk=%d\n", osc_clk);
- }
-#endif
- else if(strcmp(argv[0], "bl") == 0) { // blink backlight
- int i;
- for(i=0; i<10; i++) {
- if(i & 1)
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTD | EN | M4)) /*GPT_PWM11/GPIO57*/
- else
- MUX_VAL(CP(GPMC_nCS6), (IEN | PTU | EN | M4)) /*GPT_PWM11/GPIO57*/
- udelay(500*1000);
- }
- }
- else if(strcmp(argv[0], "g") == 0) { // g - read GPIO
- unsigned int i; // gcc compilation has problems with signed division and modulo!
- int n=32*sizeof(blocks)/sizeof(blocks[0]);
- printf("GPIO1 data: %08x\n", ((gpio_t *) OMAP34XX_GPIO1_BASE) -> datain);
- printf("%03d:", 0);
- for(i=0; i<n; i++) {
- printf(" %c%d", (gpio_is_input(i)?' ':'o'), gpio_get(i));
- if(i % 10 == 9 && i != n-1)
- printf("\n%03d:", i);
- }
- printf("\n");
-
- }
- else if(strcmp(argv[0], "m") == 0) { // m - read pinmux
- int cols=0;
- addr=0x48002030;
- printf("%08x", addr);
- while(addr <= 0x480025F8) {
- unsigned mux=*(unsigned *) addr;
- int i;
- for(i=1; i <= 2; i++) {
- printf(" %c%d%c", (mux&8)?((mux&0x10?'U':'D')):' ', (mux&7), (mux&0x100)?'I':'O');
- mux >>= 16;
- }
- if(addr == 0x48002264) {
- addr=0x480025DC;
- printf("\n%08x", addr);
- cols=0;
- }
- else {
- addr+=4;
- if(++cols == 8)
- printf("\n%08x", addr), cols=0;
- }
- }
- printf("\n");
- }
- else
- printf("uart-monitor unknown command: %s\n", argv[0]);
- }
- return 0;
-}
-
diff --git a/uart-monitor/config.mk b/uart-monitor/config.mk
deleted file mode 100644
index 1365b9d..0000000
--- a/uart-monitor/config.mk
+++ /dev/null
@@ -1,175 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#########################################################################
-
-# clean the slate ...
-PLATFORM_RELFLAGS =
-PLATFORM_CPPFLAGS =
-PLATFORM_LDFLAGS =
-
-#
-# When cross-compiling on NetBSD, we have to define __PPC__ or else we
-# will pick up a va_list declaration that is incompatible with the
-# actual argument lists emitted by the compiler.
-#
-# [Tested on NetBSD/i386 1.5 + cross-powerpc-netbsd-1.3]
-
-ifeq ($(ARCH),ppc)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__PPC__
-endif
-endif
-
-ifeq ($(ARCH),arm)
-ifeq ($(CROSS_COMPILE),powerpc-netbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-ifeq ($(CROSS_COMPILE),powerpc-openbsd-)
-PLATFORM_CPPFLAGS+= -D__ARM__
-endif
-endif
-
-ifdef ARCH
-sinclude $(TOPDIR)/$(ARCH)_config.mk # include architecture dependend rules
-endif
-ifdef CPU
-sinclude $(TOPDIR)/cpu/$(CPU)/config.mk # include CPU specific rules
-endif
-ifdef VENDOR
-BOARDDIR = $(VENDOR)/$(BOARD)
-else
-BOARDDIR = $(BOARD)
-endif
-ifdef BOARD
-sinclude $(TOPDIR)/board/$(BOARDDIR)/config.mk # include board specific rules
-endif
-
-#########################################################################
-
-CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
- else if [ -x /bin/bash ]; then echo /bin/bash; \
- else echo sh; fi ; fi)
-
-ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
-HOSTCC = cc
-else
-HOSTCC = gcc
-endif
-HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
-HOSTSTRIP = strip
-
-#########################################################################
-#
-# Option checker (courtesy linux kernel) to ensure
-# only supported compiler options are used
-#
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
-#
-# Include the make variables (CC, etc...)
-#
-AS = $(CROSS_COMPILE)as
-LD = $(CROSS_COMPILE)ld
-CC = $(CROSS_COMPILE)gcc
-CPP = $(CC) -E
-AR = $(CROSS_COMPILE)ar
-NM = $(CROSS_COMPILE)nm
-STRIP = $(CROSS_COMPILE)strip
-OBJCOPY = $(CROSS_COMPILE)objcopy
-OBJDUMP = $(CROSS_COMPILE)objdump
-RANLIB = $(CROSS_COMPILE)RANLIB
-
-RELFLAGS= $(PLATFORM_RELFLAGS)
-DBGFLAGS= -g # -DDEBUG
-OPTFLAGS= -Os #-fomit-frame-pointer
-ifndef LDSCRIPT
-#LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds.debug
-LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/x-load.lds
-endif
-OBJCFLAGS += --gap-fill=0xff
-
-gccincdir := $(shell $(CC) -print-file-name=include)
-
-CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
- -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include \
- -fno-builtin -ffreestanding -nostdinc -isystem \
- $(gccincdir) -pipe $(PLATFORM_CPPFLAGS)
-
-ifdef BUILD_TAG
-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes \
- -DBUILD_TAG='"$(BUILD_TAG)"'
-else
-CFLAGS := $(CPPFLAGS) -Wall -Wstrict-prototypes
-endif
-
-AFLAGS_DEBUG := -Wa,-gstabs
-AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
-
-LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
-
-# Location of a usable BFD library, where we define "usable" as
-# "built for ${HOST}, supports ${TARGET}". Sensible values are
-# - When cross-compiling: the root of the cross-environment
-# - Linux/ppc (native): /usr
-# - NetBSD/ppc (native): you lose ... (must extract these from the
-# binutils build directory, plus the native and U-Boot include
-# files don't like each other)
-#
-# So far, this is used only by tools/gdb/Makefile.
-
-ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc)
-BFD_ROOT_DIR = /usr/local/tools
-else
-ifeq ($(HOSTARCH),$(ARCH))
-# native
-BFD_ROOT_DIR = /usr
-else
-#BFD_ROOT_DIR = /LinuxPPC/CDK # Linux/i386
-#BFD_ROOT_DIR = /usr/pkg/cross # NetBSD/i386
-BFD_ROOT_DIR = /opt/powerpc
-endif
-endif
-
-#########################################################################
-
-export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
- AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \
- MAKE
-export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
-
-#########################################################################
-
-%.s: %.S
- $(CPP) $(AFLAGS) -o $@ $(CURDIR)/$<
-%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $(CURDIR)/$<
-%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-#########################################################################
diff --git a/uart-monitor/cpu/omap3/Makefile b/uart-monitor/cpu/omap3/Makefile
deleted file mode 100644
index fca0dad..0000000
--- a/uart-monitor/cpu/omap3/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(CPU).a
-
-START = start.o
-OBJS = cpu.o mmc.o sys_info.o
-
-all: .depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(START:.o=.S) $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(START:.o=.S) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/cpu/omap3/config.mk b/uart-monitor/cpu/omap3/config.mk
deleted file mode 100644
index 71547f3..0000000
--- a/uart-monitor/cpu/omap3/config.mk
+++ /dev/null
@@ -1,32 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-PLATFORM_RELFLAGS += -fno-strict-aliasing -fno-common -ffixed-r8
-
-# PLATFORM_CPPFLAGS += -march=armv7-a
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PLATFORM_CPPFLAGS +=$(call cc-option,-mapcs-32,-mabi=apcs-gnu)
-PLATFORM_RELFLAGS +=$(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
diff --git a/uart-monitor/cpu/omap3/cpu.c b/uart-monitor/cpu/omap3/cpu.c
deleted file mode 100644
index 1cf422a..0000000
--- a/uart-monitor/cpu/omap3/cpu.c
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * (C) Copyright 2004-2006 Texas Insturments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-#include <common.h>
-
-/* See also ARM Ref. Man. */
-#define C1_MMU (1<<0) /* mmu off/on */
-#define C1_ALIGN (1<<1) /* alignment faults off/on */
-#define C1_DC (1<<2) /* dcache off/on */
-#define C1_WB (1<<3) /* merging write buffer on/off */
-#define C1_BIG_ENDIAN (1<<7) /* big endian off/on */
-#define C1_SYS_PROT (1<<8) /* system protection */
-#define C1_ROM_PROT (1<<9) /* ROM protection */
-#define C1_IC (1<<12) /* icache off/on */
-#define C1_HIGH_VECTORS (1<<13) /* location of vectors: low/high addresses */
-#define RESERVED_1 (0xf << 3) /* must be 111b for R/W */
-
-int cpu_init (void)
-{
- return 0;
-}
-
diff --git a/uart-monitor/cpu/omap3/mmc.c b/uart-monitor/cpu/omap3/mmc.c
deleted file mode 120000
index ca45f14..0000000
--- a/uart-monitor/cpu/omap3/mmc.c
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc.c \ No newline at end of file
diff --git a/uart-monitor/cpu/omap3/mmc_host_def.h b/uart-monitor/cpu/omap3/mmc_host_def.h
deleted file mode 120000
index d40a0a1..0000000
--- a/uart-monitor/cpu/omap3/mmc_host_def.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc_host_def.h \ No newline at end of file
diff --git a/uart-monitor/cpu/omap3/mmc_protocol.h b/uart-monitor/cpu/omap3/mmc_protocol.h
deleted file mode 120000
index f79c007..0000000
--- a/uart-monitor/cpu/omap3/mmc_protocol.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/cpu/omap3/mmc_protocol.h \ No newline at end of file
diff --git a/uart-monitor/cpu/omap3/start.S b/uart-monitor/cpu/omap3/start.S
deleted file mode 100644
index 142c425..0000000
--- a/uart-monitor/cpu/omap3/start.S
+++ /dev/null
@@ -1,230 +0,0 @@
-/*
- * armboot - Startup Code for OMP2420/ARM1136 CPU-core
- *
- * Copyright (c) 2004-2006 Texas Instruments
- *
- * Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
- * Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
- * Copyright (c) 2002 Gary Jennejohn <gj@denx.de>
- * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
- * Copyright (c) 2003 Kshitij <kshitij@ti.com>
- * Copyright (c) 2004 Jian Zhang <jzhang@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/cpu.h>
-
-.globl _start
-_start:
- b reset
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
- ldr pc, _hang
-
-_hang:
- .word do_hang
-
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678
- .word 0x12345678 /* now 16*4=64 */
-
-.global _end_vect
-_end_vect:
-
- .balignl 16,0xdeadbeef
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * setup Memory and board specific bits prior to relocation.
- * relocate armboot to ram
- * setup stack
- *
- *************************************************************************
- */
-
-_TEXT_BASE:
- .word TEXT_BASE
-
-.globl _armboot_start
-_armboot_start:
- .word _start
-
-/*
- * These are defined in the board-specific linker script.
- */
-.globl _bss_start
-_bss_start:
- .word __bss_start
-
-.globl _bss_end
-_bss_end:
- .word _end
-
-/*
- * the actual reset code
- */
-
-reset:
- ldr r4, scratchpad /* r4 <- scratchpad reg address */
- ldr r5, [r0, #0x4] /* r5 <- value of boot device */
- str r5, [r4] /* store r5 in scratchpad reg */
-
- /*
- * set the cpu to SVC32 mode
- */
- mrs r0,cpsr
- bic r0,r0,#0x1f
- orr r0,r0,#0xd3
- msr cpsr,r0
-
- /* Copy vectors to mask ROM indirect addr */
- adr r0, _start /* r0 <- current position of code */
- add r0, r0, #4 /* skip reset vector */
- mov r2, #64 /* r2 <- size to copy */
- add r2, r0, r2 /* r2 <- source end address */
- mov r1, #SRAM_OFFSET0 /* build vect addr */
- mov r3, #SRAM_OFFSET1
- add r1, r1, r3
- mov r3, #SRAM_OFFSET2
- add r1, r1, r3
-next:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end address [r2] */
- bne next /* loop until equal */
-
- bl cpy_clk_code /* put dpll adjust code behind vectors */
-
- /* the mask ROM code should have PLL and others stable */
- bl cpu_init_crit
-
-relocate: /* relocate U-Boot to RAM */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* no need to relocate if XIP */
- beq stack_setup /* skip txt cpy if XIP(SRAM, SDRAM) */
-
- ldr r2, _armboot_start
- ldr r3, _bss_start
- sub r2, r3, r2 /* r2 <- size of armboot */
- add r2, r0, r2 /* r2 <- source end address */
-
-copy_loop:
- ldmia r0!, {r3-r10} /* copy from source address [r0] */
- stmia r1!, {r3-r10} /* copy to target address [r1] */
- cmp r0, r2 /* until source end addreee [r2] */
- ble copy_loop
-
- /* Set up the stack */
-stack_setup:
- ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */
- sub sp, r0, #128 /* leave 32 words for abort-stack */
- and sp, sp, #~7 /* 8 byte alinged for (ldr/str)d */
-
- /* Clear BSS (if any). Is below tx (watch load addr - need space) */
-clear_bss:
- ldr r0, _bss_start /* find start of bss segment */
- ldr r1, _bss_end /* stop here */
- mov r2, #0x00000000 /* clear value */
-clbss_l:
- str r2, [r0] /* clear BSS location */
- cmp r0, r1 /* are we at the end yet */
- add r0, r0, #4 /* increment clear index pointer */
- bne clbss_l /* keep clearing till at end */
-
- ldr pc, _start_armboot /* jump to C code */
-
-_start_armboot: .word start_armboot
-
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-cpu_init_crit:
- /*
- * Invalidate L1 I/D
- */
- mov r0, #0 /* set up for MCR */
- mcr p15, 0, r0, c8, c7, 0 /* invalidate TLBs */
- mcr p15, 0, r0, c7, c5, 1 /* invalidate icache */
-
- /* Invalide L2 cache (gp device call point)
- * - warning, this may have issues on EMU/HS devices
- * this call can corrupt r0-r5
- */
- mov r12, #0x1 @ set up to invalide L2
-smi: .word 0xE1600070 @ Call SMI monitor
-
- /*
- * disable MMU stuff and caches
- */
- mrc p15, 0, r0, c1, c0, 0
- bic r0, r0, #0x00002000 @ clear bits 13 (--V-)
- bic r0, r0, #0x00000007 @ clear bits 2:0 (-CAM)
- orr r0, r0, #0x00000002 @ set bit 1 (--A-) Align
-#ifndef CONFIG_ICACHE_OFF
- orr r0, r0, #0x00001800 @ set bit 11,12 (---I Z---) BTB,I-Cache
-#endif
- mcr p15, 0, r0, c1, c0, 0
-
- /*
- * Jump to board specific initialization... The Mask ROM will have already initialized
- * basic memory. Go here to bump up clock rate and handle wake up conditions.
- */
- adr r0, _start /* r0 <- current position of code */
- ldr r1, _TEXT_BASE /* test if we run from flash or RAM */
- cmp r0, r1 /* pass on info about skipping some init portions */
- moveq r0,#0x1 /* flag to skip prcm and sdrc setup */
- movne r0,#0x0
-
- mov ip, lr /* persevere link reg across call */
- bl lowlevel_init /* go setup pll,mux,memory */
- mov lr, ip /* restore link */
- mov pc, lr /* back to my caller */
-
-/*
- * exception handler
- */
- .align 5
-do_hang:
- ldr sp, _TEXT_BASE /* use 32 words abort stack */
- bl hang /* hang and never return */
-
-scratchpad:
- .word 0x480029c0
diff --git a/uart-monitor/cpu/omap3/sys_info.c b/uart-monitor/cpu/omap3/sys_info.c
deleted file mode 100644
index 9a14d0e..0000000
--- a/uart-monitor/cpu/omap3/sys_info.c
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (c) 2009 Wind River Systems, Inc.
- * Tom Rix <Tom.Rix@windriver.com>
- *
- * Derived from board specific omap code by
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/rev.h>
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-/*
- * get_cpu_rev(void) - extract version info
- */
-u32 get_cpu_rev(void)
-{
- u32 cpuid = 0;
- ctrl_id_t *id_base;
- /*
- * On ES1.0 the IDCODE register is not exposed on L4
- * so using CPU ID to differentiate between ES1.0 and > ES1.0.
- */
- __asm__ __volatile__("mrc p15, 0, %0, c0, c0, 0":"=r" (cpuid));
- if ((cpuid & 0xf) == 0x0)
- return CPU_3XX_ES10;
- else {
- /* Decode the IDs on > ES1.0 */
- id_base = (ctrl_id_t *) OMAP34XX_ID_L4_IO_BASE;
-
- cpuid = (__raw_readl(&id_base->idcode) >> CPU_3XX_ID_SHIFT) & 0xf;
-
- /* Some early ES2.0 seem to report ID 0, fix this */
- if (cpuid == 0)
- cpuid = CPU_3XX_ES20;
-
- return cpuid;
- }
-}
-
-/*
- * cpu_is_3410(void) - returns true for 3410
- */
-u32 cpu_is_3410(void)
-{
- int status;
- if(get_cpu_rev() < CPU_3XX_ES20) {
- return 0;
- } else {
- /* read scalability status and return 1 for 3410*/
- status = __raw_readl(CONTROL_SCALABLE_OMAP_STATUS);
- /* Check whether MPU frequency is set to 266 MHz which
- * is nominal for 3410. If yes return true else false
- */
- if (((status >> 8) & 0x3) == 0x2)
- return 1;
- else
- return 0;
- }
-}
-
diff --git a/uart-monitor/disk/Makefile b/uart-monitor/disk/Makefile
deleted file mode 100644
index 7da4624..0000000
--- a/uart-monitor/disk/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-#CFLAGS += -DET_DEBUG -DDEBUG
-
-LIB = libdisk.a
-
-OBJS = part.o
-
-all: $(LIB)
-
-$(LIB): $(START) $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/disk/part.c b/uart-monitor/disk/part.c
deleted file mode 100644
index a367f13..0000000
--- a/uart-monitor/disk/part.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <ide.h>
-#include <part.h>
-
-#undef PART_DEBUG
-
-#ifdef PART_DEBUG
-#define PRINTF(fmt,args...) printf (fmt ,##args)
-#else
-#define PRINTF(fmt,args...)
-#endif
-
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
- (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || \
- defined(CONFIG_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
-/* ------------------------------------------------------------------------- */
-/*
- * reports device info to the user
- */
-void dev_print (block_dev_desc_t *dev_desc)
-{
-#ifdef CONFIG_LBA48
- uint64_t lba512; /* number of blocks if 512bytes block size */
-#else
- lbaint_t lba512;
-#endif
-
- if (dev_desc->type==DEV_TYPE_UNKNOWN) {
- return;
- }
- if (dev_desc->if_type==IF_TYPE_SCSI) {
- printf ("(%d:%d) ", dev_desc->target,dev_desc->lun);
- }
- if (dev_desc->if_type==IF_TYPE_IDE) {
- printf ("Model: %s Firm: %s Ser#: %s\n",
- dev_desc->vendor,
- dev_desc->revision,
- dev_desc->product);
- } else {
- printf ("Vendor: %s Prod.: %s Rev: %s\n",
- dev_desc->vendor,
- dev_desc->product,
- dev_desc->revision);
- }
- printf (" Type: ");
- switch (dev_desc->type & 0x1F) {
- case DEV_TYPE_HARDDISK: printf ("Hard Disk");
- break;
- case DEV_TYPE_CDROM: printf ("CD ROM");
- break;
- case DEV_TYPE_OPDISK: printf ("Optical Device");
- break;
- case DEV_TYPE_TAPE: printf ("Tape");
- break;
- default: printf ("# %02X #", dev_desc->type & 0x1F);
- break;
- }
- if ((dev_desc->lba * dev_desc->blksz)>0L) {
- ulong mb, mb_quot, mb_rem, gb, gb_quot, gb_rem;
- lbaint_t lba;
-
- lba = dev_desc->lba;
-
- lba512 = (lba * (dev_desc->blksz/512));
- mb = (10 * lba512) / 2048; /* 2048 = (1024 * 1024) / 512 MB */
- /* round to 1 digit */
- mb_quot = mb / 10;
- mb_rem = mb - (10 * mb_quot);
-
- gb = mb / 1024;
- gb_quot = gb / 10;
- gb_rem = gb - (10 * gb_quot);
-#ifdef CONFIG_LBA48
- if (dev_desc->lba48)
- printf (" Supports 48-bit addressing\n");
-#endif
-#if defined(CFG_64BIT_LBA) && defined(CFG_64BIT_VSPRINTF)
- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%qd x %ld)\n",
- mb_quot, mb_rem,
- gb_quot, gb_rem,
- lba,
- dev_desc->blksz);
-#else
- printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
- mb_quot, mb_rem,
- gb_quot, gb_rem,
- (ulong)lba,
- dev_desc->blksz);
-#endif
- } else {
- printf (" Capacity: not available\n");
- }
-}
-#endif /* CFG_CMD_IDE || CFG_CMD_SCSI || CFG_CMD_USB || CONFIG_MMC */
-
-#if ((CONFIG_COMMANDS & CFG_CMD_IDE) || \
- (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || \
- (CONFIG_COMMANDS & CFG_CMD_MMC) || \
- defined(CONFIG_SYSTEMACE) )
-
-#if defined(CONFIG_MAC_PARTITION) || \
- defined(CONFIG_DOS_PARTITION) || \
- defined(CONFIG_ISO_PARTITION) || \
- defined(CONFIG_AMIGA_PARTITION)
-
-void init_part (block_dev_desc_t * dev_desc)
-{
-#ifdef CONFIG_ISO_PARTITION
- if (test_part_iso(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_ISO;
- return;
- }
-#endif
-
-#ifdef CONFIG_MAC_PARTITION
- if (test_part_mac(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_MAC;
- return;
- }
-#endif
-
-#ifdef CONFIG_DOS_PARTITION
- if (test_part_dos(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_DOS;
- return;
- }
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- if (test_part_amiga(dev_desc) == 0) {
- dev_desc->part_type = PART_TYPE_AMIGA;
- return;
- }
-#endif
-}
-
-
-int get_partition_info (block_dev_desc_t *dev_desc, int part, disk_partition_t *info)
-{
- switch (dev_desc->part_type) {
-#ifdef CONFIG_MAC_PARTITION
- case PART_TYPE_MAC:
- if (get_partition_info_mac(dev_desc,part,info) == 0) {
- PRINTF ("## Valid MAC partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_DOS_PARTITION
- case PART_TYPE_DOS:
- if (get_partition_info_dos(dev_desc,part,info) == 0) {
- PRINTF ("## Valid DOS partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_ISO_PARTITION
- case PART_TYPE_ISO:
- if (get_partition_info_iso(dev_desc,part,info) == 0) {
- PRINTF ("## Valid ISO boot partition found ##\n");
- return (0);
- }
- break;
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- case PART_TYPE_AMIGA:
- if (get_partition_info_amiga(dev_desc, part, info) == 0)
- {
- PRINTF ("## Valid Amiga partition found ##\n");
- return (0);
- }
- break;
-#endif
- default:
- break;
- }
- return (-1);
-}
-
-static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
-{
- switch (dev_desc->if_type) {
- case IF_TYPE_IDE: printf ("IDE");
- break;
- case IF_TYPE_SCSI: printf ("SCSI");
- break;
- case IF_TYPE_ATAPI: printf ("ATAPI");
- break;
- case IF_TYPE_USB: printf ("USB");
- break;
- case IF_TYPE_DOC: printf ("DOC");
- break;
- default: printf ("UNKNOWN");
- break;
- }
- printf (" device %d -- Partition Type: %s\n\n",
- dev_desc->dev, type);
-}
-
-void print_part (block_dev_desc_t * dev_desc)
-{
-
- switch (dev_desc->part_type) {
-#ifdef CONFIG_MAC_PARTITION
- case PART_TYPE_MAC:
- PRINTF ("## Testing for valid MAC partition ##\n");
- print_part_header ("MAC", dev_desc);
- print_part_mac (dev_desc);
- return;
-#endif
-#ifdef CONFIG_DOS_PARTITION
- case PART_TYPE_DOS:
- PRINTF ("## Testing for valid DOS partition ##\n");
- print_part_header ("DOS", dev_desc);
- print_part_dos (dev_desc);
- return;
-#endif
-
-#ifdef CONFIG_ISO_PARTITION
- case PART_TYPE_ISO:
- PRINTF ("## Testing for valid ISO Boot partition ##\n");
- print_part_header ("ISO", dev_desc);
- print_part_iso (dev_desc);
- return;
-#endif
-
-#ifdef CONFIG_AMIGA_PARTITION
- case PART_TYPE_AMIGA:
- PRINTF ("## Testing for a valid Amiga partition ##\n");
- print_part_header ("AMIGA", dev_desc);
- print_part_amiga (dev_desc);
- return;
-#endif
- }
-}
-
-
-#else /* neither MAC nor DOS nor ISO partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION nor CONFIG_ISO_PARTITION configured!
-#endif
-
-#endif /* (CONFIG_COMMANDS & CFG_CMD_IDE) || CONFIG_COMMANDS & CFG_CMD_SCSI) */
diff --git a/uart-monitor/drivers/Makefile b/uart-monitor/drivers/Makefile
deleted file mode 100644
index ffc38b3..0000000
--- a/uart-monitor/drivers/Makefile
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-# CFLAGS += -DET_DEBUG -DDEBUG
-
-LIB = libdrivers.a
-OBJS = serial.o ns16550.o onenand.o
-
-ifeq ($(BOARD), omap3430sdp)
-OBJS += k9f1g08r0a.o
-endif
-
-ifeq ($(BOARD), omap3430labrador)
-OBJS += k9f1g08r0a.o
-endif
-
-ifeq ($(BOARD), omap2420h4)
-OBJS += k9k1216.o
-endif
-
-ifeq ($(BOARD), omap2430sdp)
-OBJS += k9k1216.o
-endif
-
-ifeq ($(BOARD), omap1710h3)
-OBJS += k9f5616.o
-endif
-
-
-## Disabled for now:
-## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
-## lan91c96.o mw_eeprom.o natsemi.o \
-## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
-##
-
-all: $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(OBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(OBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/drivers/k9f1g08r0a.c b/uart-monitor/drivers/k9f1g08r0a.c
deleted file mode 100644
index f0d6452..0000000
--- a/uart-monitor/drivers/k9f1g08r0a.c
+++ /dev/null
@@ -1,512 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9F1G08R0AQ0C NAND chip driver for an OMAP2420 board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-#ifdef CFG_NAND_K9F1G08R0A
-
-#define K9F1G08R0A_MFR 0xec /* Samsung */
-#define K9F1G08R0A_ID 0xa1 /* part # */
-
-/* Since Micron and Samsung parts are similar in geometry and bus width
- * we can use the same driver. Need to revisit to make this file independent
- * of part/manufacturer
- */
-#define MT29F1G_MFR 0x2c /* Micron */
-#define MT29F1G_ID 0xa1 /* x8, 1GiB */
-#define MT29F2G_ID 0xba /* x16, 2GiB */
-#define MT29F4G_ID 0xbc /* x16, 4GiB */
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE (ADDR_COLUMN | ADDR_PAGE)
-
-#define ADDR_OOB (0x4 | ADDR_COLUMN_PAGE)
-
-#define PAGE_SIZE 2048
-#define OOB_SIZE 64
-#define MAX_NUM_PAGES 64
-
-#ifdef NAND_HW_ROMCODE_ECC_LAYOUT
-#define __raw_ecc_readl(a) (*(volatile unsigned int *)(a))
-#define __raw_ecc_writel(v, a) (*(volatile unsigned int *)(a) = (v))
-/* Register definitions */
-#define GPMC_BASE_ADDR OMAP34XX_GPMC_BASE
-
-#define ECCCLEAR (0x1 << 8)
-#define ECCRESULTREG1 (0x1 << 0)
-#define ECCSIZE512BYTE 0xFF
-#define ECCSIZE1 (ECCSIZE512BYTE << 22)
-#define ECCSIZE0 (ECCSIZE512BYTE << 12)
-#define ECCSIZE0SEL (0x000 << 0)
-
-#define ECC_BLOCK_SIZE 512
-#ifdef NAND_16BIT
-#define DEV_WIDTH 1
-static u_char ecc_pos[] = { 2, 3, 4, 5, 6, 7, 8, 9,
- 10, 11, 12, 13
-};
-#else
-#define DEV_WIDTH 0
-static u_char ecc_pos[] = { 1, 2, 3, 4, 5, 6, 7, 8,
- 9, 10, 11, 12
-};
-#endif
-
-#else
-#ifdef NAND_16BIT
-#define DEV_WIDTH 1
-#else
-#define DEV_WIDTH 0
-#endif
-
-#ifdef CFG_SW_ECC_512
-#define ECC_BLOCK_SIZE 512
-#else
-#define ECC_BLOCK_SIZE 256
-#endif
-/* JFFS2 large page layout for 3-byte ECC per 256 bytes ECC layout */
-/* This is the only SW ECC supported by u-boot. So to load u-boot
- * this should be supported */
-static u_char ecc_pos[] = {40, 41, 42, 43, 44, 45, 46, 47,
- 48, 49, 50, 51, 52, 53, 54, 55,
- 56, 57, 58, 59, 60, 61, 62, 63};
-
-#endif
-
-#define ECC_SIZE (sizeof(ecc_pos))
-#define ECC_STEPS 3
-#define ECC_CHECK_ENABLE
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %0, #1\n"
- "bne 1b" : "=r" (loops) : "0" (loops));
-}
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char *buf, ulong page_addr);
-
-static unsigned long chipsize = (256 << 20);
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
-
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if (command == NAND_CMD_RESET) {
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do {
- ret_val = READ_NAND(NAND_ADDR); /* wait till ready */
- } while ((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(unsigned int numbytes, unsigned long ofs)
-{
- uchar u;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE
- || numbytes == ADDR_OOB)
- {
- ushort col = ofs;
-
- u = col & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
-
- u = (col >> 8) & 0x07;
- if (numbytes == ADDR_OOB)
- u = u | ((DEV_WIDTH == 1) ? (1 << 2) : (1 << 3));
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- }
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE
- || numbytes == ADDR_OOB)
- {
- u = (ofs >> 11) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- u = (ofs >> 19) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
-
- /* One more address cycle for devices > 128MiB */
- if (chipsize > (128 << 20)) {
- u = (ofs >> 27) & 0xff;
- WRITE_NAND_ADDRESS(u, NAND_ADDR);
- }
- }
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- /* Check Micron part or Samsung part */
- if ((mfr == MT29F1G_MFR && (id == MT29F1G_ID ||
- id == MT29F2G_ID || id == MT29F4G_ID)) ||
- (mfr == K9F1G08R0A_MFR && (id == K9F1G08R0A_ID)))
- return 0;
-
- return 1;
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
-
-#ifdef ECC_CHECK_ENABLE
- u8 oob_buf[OOB_SIZE];
-
- /* check bad block */
- /* 0th word in spare area needs be 0xff */
- if (nand_read_oob(oob_buf, block_addr) || (oob_buf[0] & 0xff) != 0xff) {
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-#endif
- /* read the block page by page*/
- for (i = 0; i < MAX_NUM_PAGES; i++) {
- if (nand_read_page(buf + offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-
-#ifdef NAND_HW_ROMCODE_ECC_LAYOUT
-/*
- * omap_hwecc_init - Initialize the Hardware ECC for NAND flash in
- * GPMC controller
- *
- */
-static void omap_hwecc_init(void)
-{
- /*
- * Init ECC Control Register
- * Clear all ECC | Enable Reg1
- */
- __raw_ecc_writel(ECCCLEAR | ECCRESULTREG1,
- GPMC_BASE_ADDR + GPMC_ECC_CONTROL);
- __raw_ecc_writel(ECCSIZE1 | ECCSIZE0 | ECCSIZE0SEL,
- GPMC_BASE_ADDR + GPMC_ECC_SIZE_CONFIG);
- __raw_ecc_writel(0x1 | (0 << 1) | (DEV_WIDTH << 7),
- GPMC_BASE_ADDR + GPMC_ECC_CONFIG);
-}
-
-/*
- * gen_true_ecc - This function will generate true ECC value, which
- * can be used when correcting data read from NAND flash memory core
- *
- * @ecc_buf: buffer to store ecc code
- *
- * @return: re-formatted ECC value
- */
-static uint32_t gen_true_ecc(uint8_t *ecc_buf)
-{
- return ecc_buf[0] | (ecc_buf[1] << 16) | ((ecc_buf[2] & 0xF0) << 20) |
- ((ecc_buf[2] & 0x0F) << 8);
-}
-
-/*
- * omap_calculate_ecc - Generate non-inverted ECC bytes.
- *
- * Using noninverted ECC can be considered ugly since writing a blank
- * page ie. padding will clear the ECC bytes. This is no problem as
- * long nobody is trying to write data on the seemingly unused page.
- * Reading an erased page will produce an ECC mismatch between
- * generated and read ECC bytes that has to be dealt with separately.
- * E.g. if page is 0xFF (fresh erased), and if HW ECC engine within GPMC
- * is used, the result of read will be 0x0 while the ECC offsets of the
- * spare area will be 0xFF which will result in an ECC mismatch.
- * @dat: unused
- * @ecc_code: ecc_code buffer
- */
-static int omap_calculate_ecc(const uint8_t *dat, uint8_t *ecc_code)
-{
- u_int32_t val;
-
- /* Start Reading from HW ECC1_Result = 0x200 */
- val = __raw_ecc_readl(GPMC_BASE_ADDR + GPMC_ECC1_RESULT);
-
- ecc_code[0] = val & 0xFF;
- ecc_code[1] = (val >> 16) & 0xFF;
- ecc_code[2] = ((val >> 8) & 0x0F) | ((val >> 20) & 0xF0);
-
- /*
- * Stop reading anymore ECC vals and clear old results
- * enable will be called if more reads are required
- */
- __raw_ecc_writel(0x000, GPMC_BASE_ADDR + GPMC_ECC_CONFIG);
-
- return 0;
-}
-
-static int hweight32(unsigned int val)
-{
- u_char count = 0;
- for ( ; val; count++)
- val &= (val - 1);
- return count;
-}
-
-/*
- * omap_correct_data - Compares the ecc read from nand spare area with ECC
- * registers values and corrects one bit error if it has occured
- * Further details can be had from OMAP TRM and the following selected links:
- * http://en.wikipedia.org/wiki/Hamming_code
- * http://www.cs.utexas.edu/users/plaxton/c/337/05f/slides/ErrorCorrection-4.pdf
- *
- * @dat: page data
- * @read_ecc: ecc read from nand flash
- * @calc_ecc: ecc read from ECC registers
- *
- * @return 0 if data is OK or corrected, else returns -1
- */
-static int omap_correct_data(uint8_t *dat,
- uint8_t *read_ecc, uint8_t *calc_ecc)
-{
- uint32_t orig_ecc, new_ecc, res, hm;
- uint16_t parity_bits, byte;
- uint8_t bit;
-
- /* Regenerate the orginal ECC */
- orig_ecc = gen_true_ecc(read_ecc);
- new_ecc = gen_true_ecc(calc_ecc);
- /* Get the XOR of real ecc */
- res = orig_ecc ^ new_ecc;
- if (res) {
- /* Get the hamming width */
- hm = hweight32(res);
- /* Single bit errors can be corrected! */
- if (hm == 12) {
- /* Correctable data! */
- parity_bits = res >> 16;
- bit = (parity_bits & 0x7);
- byte = (parity_bits >> 3) & 0x1FF;
- /* Flip the bit to correct */
- dat[byte] ^= (0x1 << bit);
- } else if (hm == 1) {
- printf("Error: Ecc is wrong\n");
- /* ECC itself is corrupted */
- return 2;
- } else {
- /*
- * hm distance != parity pairs OR one, could mean 2 bit
- * error OR potentially be on a blank page..
- * orig_ecc: contains spare area data from nand flash.
- * new_ecc: generated ecc while reading data area.
- * Note: if the ecc = 0, all data bits from which it was
- * generated are 0xFF.
- * The 3 byte(24 bits) ecc is generated per 512byte
- * chunk of a page. If orig_ecc(from spare area)
- * is 0xFF && new_ecc(computed now from data area)=0x0,
- * this means that data area is 0xFF and spare area is
- * 0xFF. A sure sign of a erased page!
- */
- if ((orig_ecc == 0x0FFF0FFF) && (new_ecc == 0x00000000))
- return 0;
- printf("Error: Bad compare! failed\n");
- /* detected 2 bit error */
- return -1;
- }
- }
- return 0;
-}
-
-#define NAND_ECC_INIT() omap_hwecc_init()
-#define NAND_ECC_CALC(data_buf, ecc_buf) omap_calculate_ecc(data_buf, ecc_buf)
-#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\
- omap_correct_data(data_buf, ecc_gen, ecc_old)
-#else
-/* Software ECC APIs */
-#define NAND_ECC_INIT()
-#define NAND_ECC_CALC(data_buf, ecc_buf) nand_calculate_ecc(data_buf, ecc_buf)
-#define NAND_ECC_CORRECT(data_buf, ecc_gen, ecc_old)\
- nand_correct_data(data_buf, ecc_gen, ecc_old)
-#endif /* NAND_HW_ROMCODE_ECC_LAYOUT */
-
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
-#ifdef ECC_CHECK_ENABLE
- u_char ecc_code[ECC_SIZE];
- u_char ecc_calc[ECC_SIZE];
- u_char oob_buf[OOB_SIZE];
-#endif
- u16 val;
- int cntr;
- int len;
- int count;
-
-#ifdef NAND_16BIT
- u16 *p = (u16 *) buf;
-#else
- u_char *p = (u_char *) buf;
-#endif
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NanD_Command(NAND_CMD_READSTART);
- NAND_WAIT_READY();
-
- /* A delay seems to be helping here. needs more investigation */
- delay(10000);
- len = (DEV_WIDTH == 1) ? ECC_BLOCK_SIZE >> 1 : ECC_BLOCK_SIZE;
-
- /* Read in chunks of data. */
- for (count = 0; count < ECC_SIZE; count += ECC_STEPS) {
- NAND_ECC_INIT();
- for (cntr = 0; cntr < len; cntr++) {
- *p++ = READ_NAND(NAND_ADDR);
- delay(10);
- }
- NAND_ECC_CALC((p - ECC_BLOCK_SIZE), &ecc_calc[count]);
- }
-
-#ifdef ECC_CHECK_ENABLE
-#ifdef NAND_16BIT
- p = (u16 *) oob_buf;
-#else
- p = (u_char *) oob_buf;
-#endif
- len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE;
- for (cntr = 0; cntr < len; cntr++) {
- *p++ = READ_NAND(NAND_ADDR);
- delay(10);
- }
- count = 0;
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < ECC_SIZE; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
- for (count = 0, cntr = 0; cntr < PAGE_SIZE / ECC_BLOCK_SIZE;
- cntr++, count += ECC_STEPS) {
- if (NAND_ECC_CORRECT(buf, &ecc_code[count], &ecc_calc[count])
- == -1) {
- printf("ECC Failed, page 0x%08x\n", page_addr);
- for (val = 0; val < ECC_BLOCK_SIZE; val++)
- printf("%x ", buf[val]);
- printf(" Hang!!!\n");
- for (;;);
- return 1;
- }
- buf += ECC_BLOCK_SIZE;
- page_addr += ECC_BLOCK_SIZE;
- }
-#endif
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 / 2048 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- int cntr;
- int len;
-
-#ifdef NAND_16BIT
- u16 *p = (u16 *) buf;
-#else
- u_char *p = (u_char *) buf;
-#endif
- len = (DEV_WIDTH == 1) ? OOB_SIZE >> 1 : OOB_SIZE;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_OOB, page_addr);
- NanD_Command(NAND_CMD_READSTART);
- NAND_WAIT_READY();
-
- /* A delay seems to be helping here. needs more investigation */
- delay(10000);
- for (cntr = 0; cntr < len; cntr++)
- *p++ = READ_NAND(NAND_ADDR);
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-monitor/drivers/k9f5616.c b/uart-monitor/drivers/k9f5616.c
deleted file mode 100644
index 4081664..0000000
--- a/uart-monitor/drivers/k9f5616.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9F5616Q0C NAND chip driver for an OMAP16xx board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_NAND_K9F5616
-
-#define K9F5616_MFR 0xec
-#define K9F5616_ID 0x45
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define PAGE_SIZE 512
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char * buf, ulong page_addr);
-
-/* JFFS2 512-byte-page ECC layout */
-static u_char ecc_pos[] = {0,1,2,3,6,7};
-static u_char eccvalid_pos = 4;
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if(command == NAND_CMD_RESET){
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do{
- ret_val = READ_NAND(NAND_ADDR);/* wait till ready */
- } while((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(int numbytes, unsigned long ofs)
-{
- int i;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- ofs = ofs >> 8;
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE)
- for (i = 0; i < 2; i++, ofs = ofs >> 8)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- return (mfr != K9F5616_MFR || id != K9F5616_ID);
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
- uchar oob_buf[16];
-
- /* check bad block */
- /* 0th and 5th words need be 0xffff */
- if (nand_read_oob(oob_buf, block_addr) ||
-// oob_buf[0] != 0xff || oob_buf[1] != 0xff ||
-// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){
- oob_buf[5] != 0xff){
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-
- /* read the block page by page*/
- for (i=0; i<32; i++){
- if (nand_read_page(buf+offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
- u_char ecc_code[6];
- u_char ecc_calc[3];
- u_char oob_buf[16];
- u_char *p;
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1);
-
- NAND_WAIT_READY();
- p = buf;
- for (cntr = 0; cntr < 256; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
-
- p = oob_buf;
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < 6; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
-
- if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) {
- nand_calculate_ecc (buf, &ecc_calc[0]);
- if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr);
- return 1;
- }
- }
-
- if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) {
- nand_calculate_ecc (buf + 256, &ecc_calc[0]);
- if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr+0x100);
- return 1;
- }
- }
-
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READOOB);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr>>1);
- NAND_WAIT_READY();
-
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
- }
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-monitor/drivers/k9k1216.c b/uart-monitor/drivers/k9k1216.c
deleted file mode 100644
index 888fb6b..0000000
--- a/uart-monitor/drivers/k9k1216.c
+++ /dev/null
@@ -1,258 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- * Jian Zhang <jzhang@ti.com>
- *
- * Samsung K9K1216Q0C NAND chip driver for an OMAP2420 board
- *
- * This file is based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_NAND_K9K1216
-
-#define K9K1216_MFR 0xec
-#define K9K1216_ID 0x46
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-#define PAGE_SIZE 512
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-static int nand_read_page(u_char *buf, ulong page_addr);
-static int nand_read_oob(u_char * buf, ulong page_addr);
-
-/* JFFS2 512-byte-page ECC layout */
-static u_char ecc_pos[] = {0,1,2,3,6,7};
-static u_char eccvalid_pos = 4;
-
-/* NanD_Command: Send a flash command to the flash chip */
-static int NanD_Command(unsigned char command)
-{
- NAND_CTL_SETCLE(NAND_ADDR);
- WRITE_NAND_COMMAND(command, NAND_ADDR);
- NAND_CTL_CLRCLE(NAND_ADDR);
-
- if(command == NAND_CMD_RESET){
- unsigned char ret_val;
- NanD_Command(NAND_CMD_STATUS);
- do{
- ret_val = READ_NAND(NAND_ADDR);/* wait till ready */
- } while((ret_val & 0x40) != 0x40);
- }
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* NanD_Address: Set the current address for the flash chip */
-static int NanD_Address(int numbytes, unsigned long ofs)
-{
- int i;
-
- NAND_CTL_SETALE(NAND_ADDR);
-
- if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- ofs = ofs >> 9;
-
- if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE)
- for (i = 0; i < 3; i++, ofs = ofs >> 8)
- WRITE_NAND_ADDRESS(ofs, NAND_ADDR);
-
- NAND_CTL_CLRALE(NAND_ADDR);
-
- NAND_WAIT_READY();
- return 0;
-}
-
-/* read chip mfr and id
- * return 0 if they match board config
- * return 1 if not
- */
-int nand_chip()
-{
- int mfr, id;
-
- NAND_ENABLE_CE();
-
- if (NanD_Command(NAND_CMD_RESET)) {
- printf("Err: RESET\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- if (NanD_Command(NAND_CMD_READID)) {
- printf("Err: READID\n");
- NAND_DISABLE_CE();
- return 1;
- }
-
- NanD_Address(ADDR_COLUMN, 0);
-
- mfr = READ_NAND(NAND_ADDR);
- id = READ_NAND(NAND_ADDR);
-
- NAND_DISABLE_CE();
-
- return (mfr != K9K1216_MFR || id != K9K1216_ID);
-}
-
-/* read a block data to buf
- * return 1 if the block is bad or ECC error can't be corrected for any page
- * return 0 on sucess
- */
-int nand_read_block(unsigned char *buf, ulong block_addr)
-{
- int i, offset = 0;
- uchar oob_buf[16];
-
- /* check bad block */
- /* 0th and 5th words need be 0xffff */
- if (nand_read_oob(oob_buf, block_addr) ||
-// oob_buf[0] != 0xff || oob_buf[1] != 0xff ||
-// oob_buf[10] != 0xff || oob_buf[11] != 0xff ){
- oob_buf[5] != 0xff){
- printf("Skipped bad block at 0x%x\n", block_addr);
- return 1; /* skip bad block */
- }
-
- /* read the block page by page*/
- for (i=0; i<32; i++){
- if (nand_read_page(buf+offset, block_addr + offset))
- return 1;
- offset += PAGE_SIZE;
- }
-
- return 0;
-}
-static count = 0;
-/* read a page with ECC */
-static int nand_read_page(u_char *buf, ulong page_addr)
-{
- u_char ecc_code[6];
- u_char ecc_calc[3];
- u_char oob_buf[16];
- u_char *p;
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE();
- NanD_Command(NAND_CMD_READ0);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NAND_WAIT_READY();
-
- delay(500); /* we go through NFC need a bigger delay. 200 is not enough */
-
- p = buf;
- for (cntr = 0; cntr < 256; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
-
- p = oob_buf;
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *p++ = val & 0xff;
- *p++ = val >> 8;
- }
- count = 1;
- NAND_DISABLE_CE(); /* set pin high */
-
- /* Pick the ECC bytes out of the oob data */
- for (cntr = 0; cntr < 6; cntr++)
- ecc_code[cntr] = oob_buf[ecc_pos[cntr]];
-
- if ((oob_buf[eccvalid_pos] & 0x0f) != 0x0f) {
- nand_calculate_ecc (buf, &ecc_calc[0]);
- if (nand_correct_data (buf, &ecc_code[0], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr);
- for (val=0; val <256; val++)
- printf("%x ", buf[val]);
- printf("\n");
- for (;;);
- return 1;
- }
- }
-
- if ((oob_buf[eccvalid_pos] & 0xf0) != 0xf0) {
- nand_calculate_ecc (buf + 256, &ecc_calc[0]);
- if (nand_correct_data (buf + 256, &ecc_code[3], &ecc_calc[0]) == -1) {
- printf ("ECC Failed, page 0x%08x\n", page_addr+0x100);
- for (val=0; val <256; val++)
- printf("%x ", buf[val+256]);
- printf("\n");
- for (;;);
- return 1;
- }
- }
-
- return 0;
-}
-
-/* read from the 16 bytes of oob data that correspond to a 512 byte page.
- */
-static int nand_read_oob(u_char *buf, ulong page_addr)
-{
- u16 val;
- int cntr;
-
- NAND_ENABLE_CE(); /* set pin low */
- NanD_Command(NAND_CMD_READOOB);
- NanD_Address(ADDR_COLUMN_PAGE, page_addr);
- NAND_WAIT_READY();
-
-/* do {
- *(volatile u32 *)(0x6800A07c) = NAND_CMD_STATUS;
- val = *(volatile u32 *)(0x6800A084);
- printf("val = %x\n", val);
- } while ((val & 0x40) != 0x40);
-*/
- /* the above code from OSTBoot doesn't work, we use delay */
- delay(500); /* we go through NFC need a bigger delay. 200 is not enough */
-
- for (cntr = 0; cntr < 8; cntr++){
- val = READ_NAND(NAND_ADDR);
- *buf++ = val & 0xff;
- *buf++ = val >> 8;
- }
-
- NAND_WAIT_READY();
- NAND_DISABLE_CE(); /* set pin high */
-
- return 0;
-}
-
-#endif
diff --git a/uart-monitor/drivers/ns16550.c b/uart-monitor/drivers/ns16550.c
deleted file mode 100644
index b5a5c12..0000000
--- a/uart-monitor/drivers/ns16550.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/*
- * This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * COM1 NS16550 support
- * originally from linux source (arch/ppc/boot/ns16550.c)
- * modified to use CFG_ISA_MEM and new defines
- */
-
-#include <config.h>
-
-#ifdef CFG_PRINTF
-#ifdef CFG_NS16550
-
-#include <ns16550.h>
-
-#define LCRVAL LCR_8N1 /* 8 data, 1 stop, no parity */
-#define MCRVAL (MCR_DTR | MCR_RTS) /* RTS/DTR */
-#define FCRVAL (FCR_FIFO_EN | FCR_RXSR | FCR_TXSR) /* Clear & enable FIFOs */
-
-void NS16550_init (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
-#ifdef CONFIG_OMAP
- com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
-#endif
- com_port->lcr = LCR_BKSE | LCRVAL;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-#if defined(CONFIG_OMAP)
- com_port->mdr1 = 0; /* select uart mode */
-#endif
-}
-
-void NS16550_reinit (NS16550_t com_port, int baud_divisor)
-{
- com_port->ier = 0x00;
- com_port->lcr = LCR_BKSE;
- com_port->dll = baud_divisor & 0xff;
- com_port->dlm = (baud_divisor >> 8) & 0xff;
- com_port->lcr = LCRVAL;
- com_port->mcr = MCRVAL;
- com_port->fcr = FCRVAL;
-}
-
-void NS16550_putc (NS16550_t com_port, char c)
-{
- while ((com_port->lsr & LSR_THRE) == 0);
- com_port->thr = c;
-}
-
-char NS16550_getc (NS16550_t com_port)
-{
- while ((com_port->lsr & LSR_DR) == 0);
- return (com_port->rbr);
-}
-
-int NS16550_tstc (NS16550_t com_port)
-{
- return ((com_port->lsr & LSR_DR) != 0);
-}
-
-#endif
-#endif
diff --git a/uart-monitor/drivers/onenand.c b/uart-monitor/drivers/onenand.c
deleted file mode 100644
index 7d4e454..0000000
--- a/uart-monitor/drivers/onenand.c
+++ /dev/null
@@ -1,203 +0,0 @@
-/*
- * (C) Copyright 2005 Samsung Electronis
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#include <asm/string.h>
-
-#include "onenand_regs.h"
-
-#define onenand_readw(a) (*(volatile unsigned short *)(a))
-#define onenand_writew(v, a) ((*(volatile unsigned short *)(a)) = (u16) (v))
-
-#define SAMSUNG_MFR_ID 0xEC
-#define KFM1G16Q2A_DEV_ID 0x30
-#define KFN2G16Q2A_DEV_ID 0x40
-
-#ifdef CFG_ONENAND
-
-#define THIS_ONENAND(a) (ONENAND_ADDR + (a))
-
-#define READ_INTERRUPT() \
- onenand_readw(THIS_ONENAND(ONENAND_REG_INTERRUPT))
-
-#define SET_EMIFS_CS_CONFIG(v) \
- (*(volatile unsigned long *)(OMAP_EMIFS_CS_CONFIG) = (v))
-
-#define onenand_block_address(block) (block)
-#define onenand_sector_address(page) (page << 2)
-#define onenand_buffer_address() ((1 << 3) << 8)
-#define onenand_bufferram_address(block) (0)
-
-#if defined(CFG_SYNC_BURST_READ) && defined(CONFIG_OMAP1610)
-static inline void set_sync_burst_read(void)
-{
- unsigned int value;
- value = 0
- | (0x1 << 15) /* Read Mode: Synchronous */
- | (0x4 << 12) /* Burst Read Latency: 4 cycles */
- | (0x4 << 9) /* Burst Length: 8 word */
- | (0x1 << 7) /* RDY signal plarity */
- | (0x1 << 6) /* INT signal plarity */
- | (0x1 << 5) /* I/O buffer enable */
- ;
- onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1));
-
- value = 0
- | (4 << 16) /* Synchronous Burst Read */
- | (1 << 12) /* PGWST/WELEN */
- | (1 << 8) /* WRWST */
- | (4 << 4) /* RDWST */
- | (1 << 0) /* FCLKDIV => 48MHz */
- ;
- SET_EMIFS_CS_CONFIG(value);
-}
-
-static inline void set_async_read(void)
-{
- unsigned int value;
- value = 0
- | (0x0 << 15) /* Read Mode: Asynchronous */
- | (0x4 << 12) /* Burst Read Latency: 4 cycles */
- | (0x0 << 9) /* Burst Length: continuous */
- | (0x1 << 7) /* RDY signal plarity */
- | (0x1 << 6) /* INT signal plarity */
- | (0x0 << 5) /* I/O buffer disable */
- ;
- onenand_writew(value, THIS_ONENAND(ONENAND_REG_SYS_CFG1));
-
- value = 0
- | (0 << 16) /* Asynchronous Read */
- | (1 << 12) /* PGWST/WELEN */
- | (1 << 8) /* WRWST */
- | (3 << 4) /* RDWST */
- | (1 << 0) /* FCLKDIV => 48MHz */
- ;
- SET_EMIFS_CS_CONFIG(value);
-}
-#else
-#define set_sync_burst_read(...) do { } while (0)
-#define set_async_read(...) do { } while (0)
-#endif
-
-int
-onenand_chip()
-{
- unsigned short mf_id, dev_id;
- mf_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_MANUFACTURER_ID)));
- dev_id = (*(volatile unsigned short *)(THIS_ONENAND(ONENAND_REG_DEVICE_ID)));
-
- if(mf_id == SAMSUNG_MFR_ID) {
- if (dev_id == KFM1G16Q2A_DEV_ID) {
- printf("Detected Samsung MuxOneNAND1G Flash \r\n");
- return 0;
- } else if (dev_id == KFN2G16Q2A_DEV_ID) {
- printf("Detected Samsung MuxOneNAND2G Flash \r\n");
- return 0;
- } else {
- printf(" ONENAND Flash unsupported\r\n");
- return 1;
- }
- } else {
- printf("ONENAND Flash Unsupported\r\n");
- return 1;
- }
-}
-
-/* read a page with ECC */
-static inline int onenand_read_page(ulong block, ulong page, u_char *buf)
-{
- unsigned long *base;
-
-#ifndef __HAVE_ARCH_MEMCPY32
- unsigned int offset, value;
- unsigned long *p;
-#endif
-
- onenand_writew(onenand_block_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS1));
-
- onenand_writew(onenand_sector_address(page),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS8));
-
- onenand_writew(onenand_buffer_address(),
- THIS_ONENAND(ONENAND_REG_START_BUFFER));
-
- onenand_writew(onenand_bufferram_address(block),
- THIS_ONENAND(ONENAND_REG_START_ADDRESS2));
-
- onenand_writew(ONENAND_INT_CLEAR, THIS_ONENAND(ONENAND_REG_INTERRUPT));
-
- onenand_writew(ONENAND_CMD_READ, THIS_ONENAND(ONENAND_REG_COMMAND));
-
-#ifndef __HAVE_ARCH_MEMCPY32
- p = (unsigned long *) buf;
-#endif
- base = (unsigned long *) (ONENAND_ADDR + ONENAND_DATARAM);
-
- while (!(READ_INTERRUPT() & ONENAND_INT_MASTER))
- continue;
-
-#ifdef __HAVE_ARCH_MEMCPY32
- /* 32 bytes boundary memory copy */
- memcpy32(buf, base, ONENAND_PAGE_SIZE);
-#else
- for (offset = 0; offset < (ONENAND_PAGE_SIZE >> 2); offset++) {
- value = *(base + offset);
- *p++ = value;
- }
-#endif
-
- return 0;
-}
-
-#define ONENAND_START_PAGE 0
-#define ONENAND_PAGES_PER_BLOCK 64
-
-/**
- * onenand_read_block - Read a block data to buf
- * @return 0 on sucess
- */
-
-int onenand_read_block(unsigned char *buf, ulong block)
-{
- int page, offset = 0;
-
- set_sync_burst_read();
-
- /* NOTE: you must read page from page 1 of block 0 */
- /* read the block page by page*/
- for (page = ONENAND_START_PAGE;
- page < ONENAND_PAGES_PER_BLOCK; page++) {
-
- onenand_read_page(block, page, buf + offset);
-
- offset += ONENAND_PAGE_SIZE;
- }
-
- set_async_read();
-
- return 0;
-}
-
-#endif /* CFG_ONENAND */
diff --git a/uart-monitor/drivers/onenand_regs.h b/uart-monitor/drivers/onenand_regs.h
deleted file mode 100644
index d8acc8c..0000000
--- a/uart-monitor/drivers/onenand_regs.h
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- * linux/include/linux/mtd/onenand_regs.h
- *
- * OneNAND Register header file
- *
- * Copyright (C) 2005 Samsung Electronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ONENAND_REG_H
-#define __ONENAND_REG_H
-
-/* Memory Address Map Translation (Word order) */
-#define ONENAND_MEMORY_MAP(x) ((x) << 1)
-
-/*
- * External BufferRAM area
- */
-#define ONENAND_BOOTRAM ONENAND_MEMORY_MAP(0x0000)
-#define ONENAND_DATARAM ONENAND_MEMORY_MAP(0x0200)
-#define ONENAND_SPARERAM ONENAND_MEMORY_MAP(0x8010)
-
-/*
- * OneNAND Registers
- */
-#define ONENAND_REG_MANUFACTURER_ID ONENAND_MEMORY_MAP(0xF000)
-#define ONENAND_REG_DEVICE_ID ONENAND_MEMORY_MAP(0xF001)
-#define ONENAND_REG_VERSION_ID ONENAND_MEMORY_MAP(0xF002)
-#define ONENAND_REG_DATA_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF003)
-#define ONENAND_REG_BOOT_BUFFER_SIZE ONENAND_MEMORY_MAP(0xF004)
-#define ONENAND_REG_NUM_BUFFERS ONENAND_MEMORY_MAP(0xF005)
-#define ONENAND_REG_TECHNOLOGY ONENAND_MEMORY_MAP(0xF006)
-
-#define ONENAND_REG_START_ADDRESS1 ONENAND_MEMORY_MAP(0xF100)
-#define ONENAND_REG_START_ADDRESS2 ONENAND_MEMORY_MAP(0xF101)
-#define ONENAND_REG_START_ADDRESS3 ONENAND_MEMORY_MAP(0xF102)
-#define ONENAND_REG_START_ADDRESS4 ONENAND_MEMORY_MAP(0xF103)
-#define ONENAND_REG_START_ADDRESS5 ONENAND_MEMORY_MAP(0xF104)
-#define ONENAND_REG_START_ADDRESS6 ONENAND_MEMORY_MAP(0xF105)
-#define ONENAND_REG_START_ADDRESS7 ONENAND_MEMORY_MAP(0xF106)
-#define ONENAND_REG_START_ADDRESS8 ONENAND_MEMORY_MAP(0xF107)
-
-#define ONENAND_REG_START_BUFFER ONENAND_MEMORY_MAP(0xF200)
-#define ONENAND_REG_COMMAND ONENAND_MEMORY_MAP(0xF220)
-#define ONENAND_REG_SYS_CFG1 ONENAND_MEMORY_MAP(0xF221)
-#define ONENAND_REG_SYS_CFG2 ONENAND_MEMORY_MAP(0xF222)
-#define ONENAND_REG_CTRL_STATUS ONENAND_MEMORY_MAP(0xF240)
-#define ONENAND_REG_INTERRUPT ONENAND_MEMORY_MAP(0xF241)
-#define ONENAND_REG_START_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24C)
-#define ONENAND_REG_END_BLOCK_ADDRESS ONENAND_MEMORY_MAP(0xF24D)
-#define ONENAND_REG_WP_STATUS ONENAND_MEMORY_MAP(0xF24E)
-
-#define ONENAND_REG_ECC_STATUS ONENAND_MEMORY_MAP(0xFF00)
-#define ONENAND_REG_ECC_M0 ONENAND_MEMORY_MAP(0xFF01)
-#define ONENAND_REG_ECC_S0 ONENAND_MEMORY_MAP(0xFF02)
-#define ONENAND_REG_ECC_M1 ONENAND_MEMORY_MAP(0xFF03)
-#define ONENAND_REG_ECC_S1 ONENAND_MEMORY_MAP(0xFF04)
-#define ONENAND_REG_ECC_M2 ONENAND_MEMORY_MAP(0xFF05)
-#define ONENAND_REG_ECC_S2 ONENAND_MEMORY_MAP(0xFF06)
-#define ONENAND_REG_ECC_M3 ONENAND_MEMORY_MAP(0xFF07)
-#define ONENAND_REG_ECC_S3 ONENAND_MEMORY_MAP(0xFF08)
-
-/*
- * Device ID Register F001h (R)
- */
-#define ONENAND_DEVICE_DENSITY_SHIFT (4)
-#define ONENAND_DEVICE_IS_DDP (1 << 3)
-#define ONENAND_DEVICE_IS_DEMUX (1 << 2)
-#define ONENAND_DEVICE_VCC_MASK (0x3)
-
-#define ONENAND_DEVICE_DENSITY_512Mb (0x002)
-
-/*
- * Version ID Register F002h (R)
- */
-#define ONENAND_VERSION_PROCESS_SHIFT (8)
-
-/*
- * Start Address 1 F100h (R/W)
- */
-#define ONENAND_DDP_SHIFT (15)
-
-/*
- * Start Address 8 F107h (R/W)
- */
-#define ONENAND_FPA_MASK (0x3f)
-#define ONENAND_FPA_SHIFT (2)
-#define ONENAND_FSA_MASK (0x03)
-
-/*
- * Start Buffer Register F200h (R/W)
- */
-#define ONENAND_BSA_MASK (0x03)
-#define ONENAND_BSA_SHIFT (8)
-#define ONENAND_BSA_BOOTRAM (0 << 2)
-#define ONENAND_BSA_DATARAM0 (2 << 2)
-#define ONENAND_BSA_DATARAM1 (3 << 2)
-#define ONENAND_BSC_MASK (0x03)
-
-/*
- * Command Register F220h (R/W)
- */
-#define ONENAND_CMD_READ (0x00)
-#define ONENAND_CMD_READOOB (0x13)
-#define ONENAND_CMD_PROG (0x80)
-#define ONENAND_CMD_PROGOOB (0x1A)
-#define ONENAND_CMD_UNLOCK (0x23)
-#define ONENAND_CMD_LOCK (0x2A)
-#define ONENAND_CMD_LOCK_TIGHT (0x2C)
-#define ONENAND_CMD_ERASE (0x94)
-#define ONENAND_CMD_RESET (0xF0)
-#define ONENAND_CMD_READID (0x90)
-
-/* NOTE: Those are not *REAL* commands */
-#define ONENAND_CMD_BUFFERRAM (0x1978)
-
-/*
- * System Configuration 1 Register F221h (R, R/W)
- */
-#define ONENAND_SYS_CFG1_SYNC_READ (1 << 15)
-#define ONENAND_SYS_CFG1_BRL (12)
-#define ONENAND_SYS_CFG1_BL (9)
-#define ONENAND_SYS_CFG1_NO_ECC (1 << 8)
-#define ONENAND_SYS_CFG1_RDY (1 << 7)
-#define ONENAND_SYS_CFG1_INT (1 << 6)
-#define ONENAND_SYS_CFG1_IOBE (1 << 5)
-#define ONENAND_SYS_CFG1_RDY_CONF (1 << 4)
-
-/*
- * Controller Status Register F240h (R)
- */
-#define ONENAND_CTRL_ONGO (1 << 15)
-#define ONENAND_CTRL_LOCK (1 << 14)
-#define ONENAND_CTRL_LOAD (1 << 13)
-#define ONENAND_CTRL_PROGRAM (1 << 12)
-#define ONENAND_CTRL_ERASE (1 << 11)
-#define ONENAND_CTRL_ERROR (1 << 10)
-#define ONENAND_CTRL_RSTB (1 << 7)
-
-/*
- * Interrupt Status Register F241h (R)
- */
-#define ONENAND_INT_MASTER (1 << 15)
-#define ONENAND_INT_READ (1 << 7)
-#define ONENAND_INT_WRITE (1 << 6)
-#define ONENAND_INT_ERASE (1 << 5)
-#define ONENAND_INT_RESET (1 << 4)
-#define ONENAND_INT_CLEAR (0 << 0)
-
-/*
- * NAND Flash Write Protection Status Register F24Eh (R)
- */
-#define ONENAND_WP_US (1 << 2)
-#define ONENAND_WP_LS (1 << 1)
-#define ONENAND_WP_LTS (1 << 0)
-
-/*
- * ECC Status Reigser FF00h (R)
- */
-#define ONENAND_ECC_1BIT (1 << 0)
-#define ONENAND_ECC_2BIT (1 << 1)
-#define ONENAND_ECC_2BIT_ALL (0xAAAA)
-
-#endif /* __ONENAND_REG_H */
diff --git a/uart-monitor/drivers/serial.c b/uart-monitor/drivers/serial.c
deleted file mode 100644
index b9ecf2a..0000000
--- a/uart-monitor/drivers/serial.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifdef CFG_PRINTF
-#ifdef CFG_NS16550_SERIAL
-
-#include <ns16550.h>
-#ifdef CFG_NS87308
-#include <ns87308.h>
-#endif
-
-#if CONFIG_CONS_INDEX == 1
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM1;
-#elif CONFIG_CONS_INDEX == 2
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM2;
-#elif CONFIG_CONS_INDEX == 3
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM3;
-#elif CONFIG_CONS_INDEX == 4
-static NS16550_t console = (NS16550_t) CFG_NS16550_COM4;
-#else
-#error no valid console defined
-#endif
-
-static int calc_divisor (void)
-{
-// DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_OMAP1510
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 12000000) && (CONFIG_BAUDRATE == 115200)) {
- console->osc_12m_sel = OSC_12M_SEL; /* enable 6.5 * divisor */
- return (1); /* return 1 for base divisor */
- }
- console->osc_12m_sel = 0; /* clear if previsouly set */
-#endif
-#if defined(CONFIG_OMAP1610) || defined(CONFIG_OMAP1710)
- /* If can't cleanly clock 115200 set div to 1 */
- if ((CFG_NS16550_CLK == 48000000) && (CONFIG_BAUDRATE == 115200)) {
- return (26); /* return 26 for base divisor */
- }
-#endif
- return (CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-}
-
-int serial_init (void)
-{
- int clock_divisor = calc_divisor();
-
-#ifdef CFG_NS87308
- initialise_ns87308();
-#endif
-
- NS16550_init(console, clock_divisor);
-
- return (0);
-}
-
-void
-serial_putc(const char c)
-{
- if (c == '\n')
- NS16550_putc(console, '\r');
-
- NS16550_putc(console, c);
-}
-
-void
-serial_puts (const char *s)
-{
- while (*s) {
- serial_putc (*s++);
- }
-}
-
-
-int
-serial_getc(void)
-{
- return NS16550_getc(console);
-}
-
-int
-serial_tstc(void)
-{
- return NS16550_tstc(console);
-}
-
-void
-serial_setbrg (void)
-{
- int clock_divisor;
-
- clock_divisor = calc_divisor();
- NS16550_reinit(console, clock_divisor);
-}
-
-#endif
-#endif
diff --git a/uart-monitor/fs/Makefile b/uart-monitor/fs/Makefile
deleted file mode 100644
index f419b99..0000000
--- a/uart-monitor/fs/Makefile
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2000, 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-#
-
-SUBDIRS := fat
-
-.depend all:
- @for dir in $(SUBDIRS) ; do \
- $(MAKE) -C $$dir $@ ; done
diff --git a/uart-monitor/fs/fat/Makefile b/uart-monitor/fs/fat/Makefile
deleted file mode 100644
index e462757..0000000
--- a/uart-monitor/fs/fat/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TOPDIR=../../
-
-include $(TOPDIR)/config.mk
-
-LIB = libfat.a
-
-AOBJS =
-COBJS = fat.o file.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-all: $(LIB) $(AOBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/fs/fat/fat.c b/uart-monitor/fs/fat/fat.c
deleted file mode 100644
index bad4f6c..0000000
--- a/uart-monitor/fs/fat/fat.c
+++ /dev/null
@@ -1,927 +0,0 @@
-/*
- * fat.c
- *
- * R/O (V)FAT 12/16/32 filesystem implementation by Marcus Sundberg
- *
- * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6
- * 2003-03-10 - kharris@nexus-tech.net - ported to uboot
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <part.h>
-#include <fat.h>
-#include <asm/byteorder.h>
-
-#ifdef CFG_CMD_FAT
-
-/*
- * Convert a string to lowercase.
- */
-static void
-downcase(char *str)
-{
- while (*str != '\0') {
- TOLOWER(*str);
- str++;
- }
-}
-
-static block_dev_desc_t *cur_dev = NULL;
-static unsigned long part_offset = 0;
-static int cur_part = 1;
-
-#define DOS_PART_TBL_OFFSET 0x1be
-#define DOS_PART_MAGIC_OFFSET 0x1fe
-#define DOS_FS_TYPE_OFFSET 0x52
-
-int strncmp(const char * cs,const char * ct,size_t count)
-{
- register signed char __res = 0;
-
- while (count) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- count--;
- }
-
- return __res;
-}
-
-char * strcpy(char * dest,const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-
-int strcmp(const char * cs,const char * ct)
-{
- register signed char __res;
-
- while (1) {
- if ((__res = *cs - *ct++) != 0 || !*cs++)
- break;
- }
-
- return __res;
-}
-void * memcpy(void * dest,const void *src,size_t count)
-{
- char *tmp = (char *) dest, *s = (char *) src;
-
- while (count--)
- *tmp++ = *s++;
-
- return dest;
-}
-
-
-int disk_read (__u32 startblock, __u32 getsize, __u8 * bufptr)
-{
- startblock += part_offset;
- if (cur_dev == NULL)
- return -1;
- if (cur_dev->block_read) {
- return cur_dev->block_read (cur_dev->dev, startblock, getsize, (unsigned long *)bufptr);
- }
- return -1;
-}
-
-
-int
-fat_register_device(block_dev_desc_t *dev_desc, int part_no)
-{
- unsigned char buffer[SECTOR_SIZE];
-
- if (!dev_desc->block_read)
- return -1;
- cur_dev=dev_desc;
- /* check if we have a MBR (on floppies we have only a PBR) */
- if (dev_desc->block_read (dev_desc->dev, 0, 1, (ulong *) buffer) != 1) {
- printf ("** Can't read from device %d **\n", dev_desc->dev);
- return -1;
- }
- if (buffer[DOS_PART_MAGIC_OFFSET] != 0x55 ||
- buffer[DOS_PART_MAGIC_OFFSET + 1] != 0xaa) {
- /* no signature found */
- return -1;
- }
- if(!strncmp((char *)&buffer[DOS_FS_TYPE_OFFSET],"FAT",3)) {
- /* ok, we assume we are on a PBR only */
- cur_part = 1;
- part_offset=0;
- }
- else {
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_COMMANDS & CFG_CMD_MMC) || defined(CONFIG_SYSTEMACE)
- disk_partition_t info;
- if(!get_partition_info(dev_desc, part_no, &info)) {
- part_offset = info.start;
- cur_part = part_no;
- }
- else {
- printf ("** Partition %d not valid on device %d **\n",part_no,dev_desc->dev);
- return -1;
- }
-#else
- /* FIXME we need to determine the start block of the
- * partition where the DOS FS resides. This can be done
- * by using the get_partition_info routine. For this
- * purpose the libpart must be included.
- */
- part_offset=63;
- //part_offset=0;
- cur_part = 1;
-#endif
- }
- return 0;
-}
-
-
-/*
- * Get the first occurence of a directory delimiter ('/' or '\') in a string.
- * Return index into string if found, -1 otherwise.
- */
-static int
-dirdelim(char *str)
-{
- char *start = str;
-
- while (*str != '\0') {
- if (ISDIRDELIM(*str)) return str - start;
- str++;
- }
- return -1;
-}
-
-
-/*
- * Match volume_info fs_type strings.
- * Return 0 on match, -1 otherwise.
- */
-static int
-compare_sign(char *str1, char *str2)
-{
- char *end = str1+SIGNLEN;
-
- while (str1 != end) {
- if (*str1 != *str2) {
- return -1;
- }
- str1++;
- str2++;
- }
-
- return 0;
-}
-
-
-/*
- * Extract zero terminated short name from a directory entry.
- */
-static void get_name (dir_entry *dirent, char *s_name)
-{
- char *ptr;
-
- memcpy (s_name, dirent->name, 8);
- s_name[8] = '\0';
- ptr = s_name;
- while (*ptr && *ptr != ' ')
- ptr++;
- if (dirent->ext[0] && dirent->ext[0] != ' ') {
- *ptr = '.';
- ptr++;
- memcpy (ptr, dirent->ext, 3);
- ptr[3] = '\0';
- while (*ptr && *ptr != ' ')
- ptr++;
- }
- *ptr = '\0';
- if (*s_name == DELETED_FLAG)
- *s_name = '\0';
- else if (*s_name == aRING)
- *s_name = 'å';
- downcase (s_name);
-}
-
-/*
- * Get the entry at index 'entry' in a FAT (12/16/32) table.
- * On failure 0x00 is returned.
- */
-static __u32
-get_fatent(fsdata *mydata, __u32 entry)
-{
- __u32 bufnum;
- __u32 offset;
- __u32 ret = 0x00;
-
- switch (mydata->fatsize) {
- case 32:
- bufnum = entry / FAT32BUFSIZE;
- offset = entry - bufnum * FAT32BUFSIZE;
- break;
- case 16:
- bufnum = entry / FAT16BUFSIZE;
- offset = entry - bufnum * FAT16BUFSIZE;
- break;
- case 12:
- bufnum = entry / FAT12BUFSIZE;
- offset = entry - bufnum * FAT12BUFSIZE;
- break;
-
- default:
- /* Unsupported FAT size */
- return ret;
- }
- /* Read a new block of FAT entries into the cache. */
- if (bufnum != mydata->fatbufnum) {
- int getsize = FATBUFSIZE/FS_BLOCK_SIZE;
- __u8 *bufptr = mydata->fatbuf;
- __u32 fatlength = mydata->fatlength;
- __u32 startblock = bufnum * FATBUFBLOCKS;
- unsigned long i;
-
- fatlength *= SECTOR_SIZE; /* We want it in bytes now */
- startblock += mydata->fat_sect; /* Offset from start of disk */
-
- if (getsize > fatlength) getsize = fatlength;
- if (disk_read(startblock, getsize, bufptr) < 0) {
- FAT_DPRINT("Error reading FAT blocks\n");
- return ret;
- }
- mydata->fatbufnum = bufnum;
- }
-
- /* Get the actual entry from the table */
- switch (mydata->fatsize) {
- case 32:
- ret = FAT2CPU32(((__u32*)mydata->fatbuf)[offset]);
- break;
- case 16:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[offset]);
- break;
- case 12: {
- __u32 off16 = (offset*3)/4;
- __u16 val1, val2;
-
- switch (offset & 0x3) {
- case 0:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- ret &= 0xfff;
- break;
- case 1:
- val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- val1 &= 0xf000;
- val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]);
- val2 &= 0x00ff;
- ret = (val2 << 4) | (val1 >> 12);
- break;
- case 2:
- val1 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);
- val1 &= 0xff00;
- val2 = FAT2CPU16(((__u16*)mydata->fatbuf)[off16+1]);
- val2 &= 0x000f;
- ret = (val2 << 8) | (val1 >> 8);
- break;
- case 3:
- ret = FAT2CPU16(((__u16*)mydata->fatbuf)[off16]);;
- ret = (ret & 0xfff0) >> 4;
- break;
- default:
- break;
- }
- }
- break;
- }
- FAT_DPRINT("ret: %d, offset: %d\n", ret, offset);
-
- return ret;
-}
-
-
-/*
- * Read at most 'size' bytes from the specified cluster into 'buffer'.
- * Return 0 on success, -1 otherwise.
- */
-static int
-get_cluster(fsdata *mydata, __u32 clustnum, __u8 *buffer, unsigned long size)
-{
- int idx = 0;
- __u32 startsect;
-
- if (clustnum > 0) {
- startsect = mydata->data_begin + clustnum*mydata->clust_size;
- } else {
- startsect = mydata->rootdir_sect;
- }
-
- if (disk_read(startsect, size/FS_BLOCK_SIZE , buffer) < 0) {
- FAT_DPRINT("Error reading data\n");
- return -1;
- }
- if(size % FS_BLOCK_SIZE) {
- __u8 tmpbuf[FS_BLOCK_SIZE];
- idx= size/FS_BLOCK_SIZE;
- if (disk_read(startsect + idx, 1, tmpbuf) < 0) {
- FAT_DPRINT("Error reading data\n");
- return -1;
- }
- buffer += idx*FS_BLOCK_SIZE;
-
- memcpy(buffer, tmpbuf, size % FS_BLOCK_SIZE);
- return 0;
- }
-
- return 0;
-}
-
-
-/*
- * Read at most 'maxsize' bytes from the file associated with 'dentptr'
- * into 'buffer'.
- * Return the number of bytes read or -1 on fatal errors.
- */
-static long
-get_contents(fsdata *mydata, dir_entry *dentptr, __u8 *buffer,
- unsigned long maxsize)
-{
- unsigned long filesize = FAT2CPU32(dentptr->size), gotsize = 0;
- unsigned int bytesperclust = mydata->clust_size * SECTOR_SIZE;
- __u32 curclust = START(dentptr);
- __u32 endclust, newclust;
- unsigned long actsize;
-
- FAT_DPRINT("Filesize: %ld bytes\n", filesize);
-
- if (maxsize > 0 && filesize > maxsize) filesize = maxsize;
-
- FAT_DPRINT("Reading: %ld bytes\n", filesize);
-
- actsize=bytesperclust;
- endclust=curclust;
- do {
- /* search for consecutive clusters */
- while(actsize < filesize) {
- newclust = get_fatent(mydata, endclust);
- if((newclust -1)!=endclust)
- goto getit;
- if (newclust <= 0x0001 || newclust >= 0xfff0) {
- FAT_DPRINT("curclust: 0x%x\n", newclust);
- FAT_DPRINT("Invalid FAT entry\n");
- return gotsize;
- }
- endclust=newclust;
- actsize+= bytesperclust;
- }
- /* actsize >= file size */
- actsize -= bytesperclust;
- /* get remaining clusters */
- if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- /* get remaining bytes */
- gotsize += (int)actsize;
- filesize -= actsize;
- buffer += actsize;
- actsize= filesize;
- if (get_cluster(mydata, endclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- gotsize+=actsize;
- return gotsize;
-getit:
- if (get_cluster(mydata, curclust, buffer, (int)actsize) != 0) {
- FAT_ERROR("Error reading cluster\n");
- return -1;
- }
- gotsize += (int)actsize;
- filesize -= actsize;
- buffer += actsize;
- curclust = get_fatent(mydata, endclust);
- if (curclust <= 0x0001 || curclust >= 0xfff0) {
- FAT_DPRINT("curclust: 0x%x\n", curclust);
- FAT_ERROR("Invalid FAT entry\n");
- return gotsize;
- }
- actsize=bytesperclust;
- endclust=curclust;
- } while (1);
-}
-
-
-#ifdef CONFIG_SUPPORT_VFAT
-/*
- * Extract the file name information from 'slotptr' into 'l_name',
- * starting at l_name[*idx].
- * Return 1 if terminator (zero byte) is found, 0 otherwise.
- */
-static int
-slot2str(dir_slot *slotptr, char *l_name, int *idx)
-{
- int j;
-
- for (j = 0; j <= 8; j += 2) {
- l_name[*idx] = slotptr->name0_4[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
- for (j = 0; j <= 10; j += 2) {
- l_name[*idx] = slotptr->name5_10[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
- for (j = 0; j <= 2; j += 2) {
- l_name[*idx] = slotptr->name11_12[j];
- if (l_name[*idx] == 0x00) return 1;
- (*idx)++;
- }
-
- return 0;
-}
-
-/* Calculate short name checksum */
-static __u8
-mkcksum(const char *str)
-{
- int i;
- __u8 ret = 0;
-
- for (i = 0; i < 11; i++) {
- ret = (((ret&1)<<7)|((ret&0xfe)>>1)) + str[i];
- }
-
- return ret;
-}
-#endif
-
-
-/*
- * Get the directory entry associated with 'filename' from the directory
- * starting at 'startsect'
- */
-
-
-static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
- char *filename, dir_entry * retdent,
- int dols)
-{
-
-}
-
-#if 0
-__u8 get_dentfromdir_block[MAX_CLUSTSIZE];
-static dir_entry *get_dentfromdir (fsdata * mydata, int startsect,
- char *filename, dir_entry * retdent,
- int dols)
-{
- __u16 prevcksum = 0xffff;
- __u32 curclust = START (retdent);
- int files = 0, dirs = 0;
-
- while (1) {
- dir_entry *dentptr;
- int i;
-
- if (get_cluster (mydata, curclust, get_dentfromdir_block,
- mydata->clust_size * SECTOR_SIZE) != 0) {
- FAT_DPRINT ("Error: reading directory block\n");
- return NULL;
- }
- dentptr = (dir_entry *) get_dentfromdir_block;
- for (i = 0; i < DIRENTSPERCLUST; i++) {
- char s_name[14], l_name[256];
-
- l_name[0] = '\0';
- if (dentptr->name[0] == DELETED_FLAG) {
- dentptr++;
- continue;
- }
- if ((dentptr->attr & ATTR_VOLUME)) {
- /* Volume label or VFAT entry */
- dentptr++;
- continue;
- }
- if (dentptr->name[0] == 0) {
- if (dols) {
- printf ("\n%d file(s), %d dir(s)\n\n", files, dirs);
- }
- FAT_DPRINT ("Dentname == NULL - %d\n", i);
- return NULL;
- }
-#ifdef CONFIG_SUPPORT_VFAT
- if (dols && mkcksum (dentptr->name) == prevcksum) {
- dentptr++;
- continue;
- }
-#endif
- get_name (dentptr, s_name);
- if (dols) {
- int isdir = (dentptr->attr & ATTR_DIR);
- char dirc;
- int doit = 0;
-
- if (isdir) {
- dirs++;
- dirc = '/';
- doit = 1;
- } else {
- dirc = ' ';
- if (s_name[0] != 0) {
- files++;
- doit = 1;
- }
- }
- if (doit) {
- if (dirc == ' ') {
- printf (" %8ld %s%c\n",
- (long) FAT2CPU32 (dentptr->size), s_name,
- dirc);
- } else {
- printf (" %s%c\n", s_name, dirc);
- }
- }
- dentptr++;
- continue;
- }
- if (strcmp (filename, s_name) && strcmp (filename, l_name)) {
- FAT_DPRINT ("Mismatch: |%s|%s|\n", s_name, l_name);
- dentptr++;
- continue;
- }
- memcpy (retdent, dentptr, sizeof (dir_entry));
-
- FAT_DPRINT ("DentName: %s", s_name);
- FAT_DPRINT (", start: 0x%x", START (dentptr));
- FAT_DPRINT (", size: 0x%x %s\n",
- FAT2CPU32 (dentptr->size),
- (dentptr->attr & ATTR_DIR) ? "(DIR)" : "");
-
- return retdent;
- }
- curclust = get_fatent (mydata, curclust);
- if (curclust <= 0x0001 || curclust >= 0xfff0) {
- FAT_DPRINT ("curclust: 0x%x\n", curclust);
- FAT_ERROR ("Invalid FAT entry\n");
- return NULL;
- }
- }
-
- return NULL;
-}
-#endif
-
-
-/*
- * Read boot sector and volume info from a FAT filesystem
- */
-static int
-read_bootsectandvi(boot_sector *bs, volume_info *volinfo, int *fatsize)
-{
- __u8 block[FS_BLOCK_SIZE];
- volume_info *vistart;
-
- FAT_DPRINT("Reading boot sector\n");
-
- if (disk_read(0, 1, block) < 0) {
- FAT_DPRINT("Error: reading block\n");
- return -1;
- }
-
- memcpy(bs, block, sizeof(boot_sector));
- bs->reserved = FAT2CPU16(bs->reserved);
- bs->fat_length = FAT2CPU16(bs->fat_length);
- bs->secs_track = FAT2CPU16(bs->secs_track);
- bs->heads = FAT2CPU16(bs->heads);
-#if 0 /* UNUSED */
- bs->hidden = FAT2CPU32(bs->hidden);
-#endif
- bs->total_sect = FAT2CPU32(bs->total_sect);
-
- /* FAT32 entries */
- if (bs->fat_length == 0) {
- /* Assume FAT32 */
- bs->fat32_length = FAT2CPU32(bs->fat32_length);
- bs->flags = FAT2CPU16(bs->flags);
- bs->root_cluster = FAT2CPU32(bs->root_cluster);
- bs->info_sector = FAT2CPU16(bs->info_sector);
- bs->backup_boot = FAT2CPU16(bs->backup_boot);
- vistart = (volume_info*) (block + sizeof(boot_sector));
- *fatsize = 32;
- } else {
- vistart = (volume_info*) &(bs->fat32_length);
- *fatsize = 0;
- }
- memcpy(volinfo, vistart, sizeof(volume_info));
-
- /* Terminate fs_type string. Writing past the end of vistart
- is ok - it's just the buffer. */
- vistart->fs_type[8] = '\0';
-
- if (*fatsize == 32) {
- if (compare_sign(FAT32_SIGN, vistart->fs_type) == 0) {
- return 0;
- }
- } else {
- if (compare_sign(FAT12_SIGN, vistart->fs_type) == 0) {
- *fatsize = 12;
- return 0;
- }
- if (compare_sign(FAT16_SIGN, vistart->fs_type) == 0) {
- *fatsize = 16;
- return 0;
- }
- }
-
- FAT_DPRINT("Error: broken fs_type sign\n");
- return -1;
-}
-
-#if 0
-__u8 do_fat_read_block[MAX_CLUSTSIZE]; /* Block buffer */
-#endif
-
-__u8 *fnamecopy = 0x80500000;
-__u8 *do_fat_read_block = 0x80500880;
-
-boot_sector bs;
-volume_info volinfo;
-fsdata datablock;
-
-long
-do_fat_read(const char *filename, void *buffer, unsigned long maxsize,
- int dols)
-{
-#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */
- static
-#endif
- fsdata *mydata = &datablock;
- dir_entry *dentptr;
- __u16 prevcksum = 0xffff;
- char *subname = "";
- int rootdir_size, cursect;
- int idx, isdir = 0;
- int files = 0, dirs = 0;
- long ret = 0;
- int firsttime;
-
- if (read_bootsectandvi (&bs, &volinfo, &mydata->fatsize)) {
- printf ("Error: reading boot sector\n");
- return -1;
- }
- if (mydata->fatsize == 32) {
- mydata->fatlength = bs.fat32_length;
- } else {
- mydata->fatlength = bs.fat_length;
- }
- mydata->fat_sect = bs.reserved;
- cursect = mydata->rootdir_sect
- = mydata->fat_sect + mydata->fatlength * bs.fats;
- mydata->clust_size = bs.cluster_size;
- if (mydata->fatsize == 32) {
- rootdir_size = mydata->clust_size;
- mydata->data_begin = mydata->rootdir_sect /* + rootdir_size */
- - (mydata->clust_size * 2);
- } else {
- rootdir_size = ((bs.dir_entries[1] * (int) 256 + bs.dir_entries[0])
- * sizeof (dir_entry)) / SECTOR_SIZE;
- mydata->data_begin = mydata->rootdir_sect + rootdir_size
- - (mydata->clust_size * 2);
- }
- mydata->fatbufnum = -1;
-
- FAT_DPRINT ("FAT%d, fatlength: %d\n", mydata->fatsize,
- mydata->fatlength);
- FAT_DPRINT ("Rootdir begins at sector: %d, offset: %x, size: %d\n"
- "Data begins at: %d\n",
- mydata->rootdir_sect, mydata->rootdir_sect * SECTOR_SIZE,
- rootdir_size, mydata->data_begin);
- FAT_DPRINT ("Cluster size: %d\n", mydata->clust_size);
-
- /* "cwd" is always the root... */
- while (ISDIRDELIM (*filename))
- filename++;
- /* Make a copy of the filename and convert it to lowercase */
- strcpy (fnamecopy, filename);
- downcase (fnamecopy);
- if (*fnamecopy == '\0') {
- if (!dols){
- printf("\n not there\n");
- return -1;
- }
- dols = LS_ROOT;
- } else if ((idx = dirdelim (fnamecopy)) >= 0) {
- isdir = 1;
- fnamecopy[idx] = '\0';
- subname = fnamecopy + idx + 1;
- /* Handle multiple delimiters */
- while (ISDIRDELIM (*subname))
- subname++;
- } else if (dols) {
- isdir = 1;
- }
-
- while (1) {
- int i;
-
- if (disk_read (cursect, mydata->clust_size, do_fat_read_block) < 0) {
- printf ("Error: reading rootdir block\n");
- return -1;
- }
- dentptr = (dir_entry *) do_fat_read_block;
- for (i = 0; i < DIRENTSPERBLOCK; i++) {
- char s_name[14], l_name[256];
-
- l_name[0] = '\0';
- if ((dentptr->attr & ATTR_VOLUME)) {
- /* Volume label or VFAT entry */
- dentptr++;
- continue;
- } else if (dentptr->name[0] == 0) {
- FAT_DPRINT ("RootDentname == NULL - %d\n", i);
- if (dols == LS_ROOT) {
- printf ("\n%d file(s), %d dir(s)\n\n", files, dirs);
- return 0;
- }
- return -1;
- }
-#ifdef CONFIG_SUPPORT_VFAT
- else if (dols == LS_ROOT
- && mkcksum (dentptr->name) == prevcksum) {
- dentptr++;
- continue;
- }
-#endif
- get_name (dentptr, s_name);
- if (dols == LS_ROOT) {
- int isdir = (dentptr->attr & ATTR_DIR);
- char dirc;
- int doit = 0;
-
- if (isdir) {
- dirc = '/';
- if (s_name[0] != 0) {
- dirs++;
- doit = 1;
- }
- } else {
- dirc = ' ';
- if (s_name[0] != 0) {
- files++;
- doit = 1;
- }
- }
- if (doit) {
- if (dirc == ' ') {
- printf (" %8ld %s%c\n",
- (long) FAT2CPU32 (dentptr->size), s_name,
- dirc);
- } else {
- printf (" %s%c\n", s_name, dirc);
- }
- }
- dentptr++;
- continue;
- }
- if (strcmp (fnamecopy, s_name) && strcmp (fnamecopy, l_name)) {
- FAT_DPRINT ("RootMismatch: |%s|%s|\n", s_name, l_name);
- dentptr++;
- continue;
- }
- if (isdir && !(dentptr->attr & ATTR_DIR))
- return -1;
-
- FAT_DPRINT ("RootName: %s", s_name);
- FAT_DPRINT (", start: 0x%x", START (dentptr));
- FAT_DPRINT (", size: 0x%x %s\n",
- FAT2CPU32 (dentptr->size), isdir ? "(DIR)" : "");
-
- goto rootdir_done; /* We got a match */
- }
- cursect++;
- }
- rootdir_done:
-
- firsttime = 1;
- while (isdir) {
- int startsect = mydata->data_begin
- + START (dentptr) * mydata->clust_size;
- dir_entry dent;
- char *nextname = NULL;
-
- dent = *dentptr;
- dentptr = &dent;
- idx = dirdelim (subname);
- if (idx >= 0) {
- subname[idx] = '\0';
- nextname = subname + idx + 1;
- /* Handle multiple delimiters */
- while (ISDIRDELIM (*nextname))
- nextname++;
- if (dols && *nextname == '\0')
- firsttime = 0;
- } else {
- if (dols && firsttime) {
- firsttime = 0;
- } else {
- isdir = 0;
- }
- }
-
- if (get_dentfromdir (mydata, startsect, subname, dentptr,
- isdir ? 0 : dols) == NULL) {
- if (dols && !isdir)
- return 0;
- return -1;
- }
-
- if (idx >= 0) {
- if (!(dentptr->attr & ATTR_DIR))
- return -1;
- subname = nextname;
- }
- }
- ret = get_contents (mydata, dentptr, buffer, maxsize);
- FAT_DPRINT ("Size: %d, got: %ld\n", FAT2CPU32 (dentptr->size), ret);
-
- return ret;
-}
-
-
-int
-file_fat_detectfs(void)
-{
- boot_sector bs;
- volume_info volinfo;
- int fatsize;
- char vol_label[12];
-
- if(cur_dev==NULL) {
- printf("No current device\n");
- return 1;
- }
-#if (CONFIG_COMMANDS & CFG_CMD_IDE) || (CONFIG_COMMANDS & CFG_CMD_SCSI) || \
- (CONFIG_COMMANDS & CFG_CMD_USB) || (CONFIG_MMC)
- printf("Interface: ");
- switch(cur_dev->if_type) {
- case IF_TYPE_IDE : printf("IDE"); break;
- case IF_TYPE_SCSI : printf("SCSI"); break;
- case IF_TYPE_ATAPI : printf("ATAPI"); break;
- case IF_TYPE_USB : printf("USB"); break;
- case IF_TYPE_DOC : printf("DOC"); break;
- case IF_TYPE_MMC : printf("MMC"); break;
- default : printf("Unknown");
- }
- printf("\n Device %d: ",cur_dev->dev);
- dev_print(cur_dev);
-#endif
- if(read_bootsectandvi(&bs, &volinfo, &fatsize)) {
- printf("\nNo valid FAT fs found\n");
- return 1;
- }
- memcpy (vol_label, volinfo.volume_label, 11);
- vol_label[11] = '\0';
- volinfo.fs_type[5]='\0';
- printf("Partition %d: Filesystem: %s \"%s\"\n",cur_part,volinfo.fs_type,vol_label);
- return 0;
-}
-
-
-int
-file_fat_ls(const char *dir)
-{
- return do_fat_read(dir, NULL, 0, LS_YES);
-}
-
-
-long
-file_fat_read(const char *filename, void *buffer, unsigned long maxsize)
-{
- long ret;
- ret = do_fat_read(filename, buffer, maxsize, LS_NO);
- return ret;
-}
-
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */
diff --git a/uart-monitor/fs/fat/file.c b/uart-monitor/fs/fat/file.c
deleted file mode 100644
index 2a2354e..0000000
--- a/uart-monitor/fs/fat/file.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * file.c
- *
- * Mini "VFS" by Marcus Sundberg
- *
- * 2002-07-28 - rjones@nexus-tech.net - ported to ppcboot v1.1.6
- * 2003-03-10 - kharris@nexus-tech.net - ported to uboot
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <malloc.h>
-#include <part.h>
-#include <fat.h>
-#include <linux/stat.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_FAT)
-
-/* Supported filesystems */
-static const struct filesystem filesystems[] = {
- { file_fat_detectfs, file_fat_ls, file_fat_read, "FAT" },
-};
-#define NUM_FILESYS (sizeof(filesystems)/sizeof(struct filesystem))
-
-/* The filesystem which was last detected */
-static int current_filesystem = FSTYPE_NONE;
-
-/* The current working directory */
-#define CWD_LEN 511
-char file_cwd[CWD_LEN+1] = "/";
-
-const char *
-file_getfsname(int idx)
-{
- if (idx < 0 || idx >= NUM_FILESYS) return NULL;
-
- return filesystems[idx].name;
-}
-
-
-static void
-pathcpy(char *dest, const char *src)
-{
- char *origdest = dest;
-
- do {
- if (dest-file_cwd >= CWD_LEN) {
- *dest = '\0';
- return;
- }
- *(dest) = *(src);
- if (*src == '\0') {
- if (dest-- != origdest && ISDIRDELIM(*dest)) {
- *dest = '\0';
- }
- return;
- }
- ++dest;
- if (ISDIRDELIM(*src)) {
- while (ISDIRDELIM(*src)) src++;
- } else {
- src++;
- }
- } while (1);
-}
-
-
-int
-file_cd(const char *path)
-{
- if (ISDIRDELIM(*path)) {
- while (ISDIRDELIM(*path)) path++;
- strncpy(file_cwd+1, path, CWD_LEN-1);
- } else {
- const char *origpath = path;
- char *tmpstr = file_cwd;
- int back = 0;
-
- while (*tmpstr != '\0') tmpstr++;
- do {
- tmpstr--;
- } while (ISDIRDELIM(*tmpstr));
-
- while (*path == '.') {
- path++;
- while (*path == '.') {
- path++;
- back++;
- }
- if (*path != '\0' && !ISDIRDELIM(*path)) {
- path = origpath;
- back = 0;
- break;
- }
- while (ISDIRDELIM(*path)) path++;
- origpath = path;
- }
-
- while (back--) {
- /* Strip off path component */
- while (!ISDIRDELIM(*tmpstr)) {
- tmpstr--;
- }
- if (tmpstr == file_cwd) {
- /* Incremented again right after the loop. */
- tmpstr--;
- break;
- }
- /* Skip delimiters */
- while (ISDIRDELIM(*tmpstr)) tmpstr--;
- }
- tmpstr++;
- if (*path == '\0') {
- if (tmpstr == file_cwd) {
- *tmpstr = '/';
- tmpstr++;
- }
- *tmpstr = '\0';
- return 0;
- }
- *tmpstr = '/';
- pathcpy(tmpstr+1, path);
- }
-
- return 0;
-}
-
-
-int
-file_detectfs(void)
-{
- int i;
-
- current_filesystem = FSTYPE_NONE;
-
- for (i = 0; i < NUM_FILESYS; i++) {
- if (filesystems[i].detect() == 0) {
- strcpy(file_cwd, "/");
- current_filesystem = i;
- break;
- }
- }
-
- return current_filesystem;
-}
-
-
-int
-file_ls(const char *dir)
-{
- char fullpath[1024];
- const char *arg;
-
- if (current_filesystem == FSTYPE_NONE) {
- printf("Can't list files without a filesystem!\n");
- return -1;
- }
-
- if (ISDIRDELIM(*dir)) {
- arg = dir;
- } else {
- sprintf(fullpath, "%s/%s", file_cwd, dir);
- arg = fullpath;
- }
- return filesystems[current_filesystem].ls(arg);
-}
-
-
-long
-file_read(const char *filename, void *buffer, unsigned long maxsize)
-{
- char fullpath[1024];
- const char *arg;
-
- if (current_filesystem == FSTYPE_NONE) {
- printf("Can't load file without a filesystem!\n");
- return -1;
- }
-
- if (ISDIRDELIM(*filename)) {
- arg = filename;
- } else {
- sprintf(fullpath, "%s/%s", file_cwd, filename);
- arg = fullpath;
- }
-
- return filesystems[current_filesystem].read(arg, buffer, maxsize);
-}
-
-#endif /* #if (CONFIG_COMMANDS & CFG_CMD_FAT) */
diff --git a/uart-monitor/include/asm/arch-arm1136/bits.h b/uart-monitor/include/asm/arch-arm1136/bits.h
deleted file mode 100644
index dc3273e..0000000
--- a/uart-monitor/include/asm/arch-arm1136/bits.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/* bits.h
- * Copyright (c) 2004 Texas Instruments
- *
- * This package is free software; you can redistribute it and/or
- * modify it under the terms of the license found in the file
- * named COPYING that should have accompanied this file.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-#ifndef __bits_h
-#define __bits_h 1
-
-#define BIT0 (1<<0)
-#define BIT1 (1<<1)
-#define BIT2 (1<<2)
-#define BIT3 (1<<3)
-#define BIT4 (1<<4)
-#define BIT5 (1<<5)
-#define BIT6 (1<<6)
-#define BIT7 (1<<7)
-#define BIT8 (1<<8)
-#define BIT9 (1<<9)
-#define BIT10 (1<<10)
-#define BIT11 (1<<11)
-#define BIT12 (1<<12)
-#define BIT13 (1<<13)
-#define BIT14 (1<<14)
-#define BIT15 (1<<15)
-#define BIT16 (1<<16)
-#define BIT17 (1<<17)
-#define BIT18 (1<<18)
-#define BIT19 (1<<19)
-#define BIT20 (1<<20)
-#define BIT21 (1<<21)
-#define BIT22 (1<<22)
-#define BIT23 (1<<23)
-#define BIT24 (1<<24)
-#define BIT25 (1<<25)
-#define BIT26 (1<<26)
-#define BIT27 (1<<27)
-#define BIT28 (1<<28)
-#define BIT29 (1<<29)
-#define BIT30 (1<<30)
-#define BIT31 (1<<31)
-
-#endif
-
diff --git a/uart-monitor/include/asm/arch-arm1136/clocks.h b/uart-monitor/include/asm/arch-arm1136/clocks.h
deleted file mode 120000
index c4b03ba..0000000
--- a/uart-monitor/include/asm/arch-arm1136/clocks.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-arm1136/clocks242x.h b/uart-monitor/include/asm/arch-arm1136/clocks242x.h
deleted file mode 120000
index f080726..0000000
--- a/uart-monitor/include/asm/arch-arm1136/clocks242x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks242x.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-arm1136/clocks243x.h b/uart-monitor/include/asm/arch-arm1136/clocks243x.h
deleted file mode 120000
index 703bdce..0000000
--- a/uart-monitor/include/asm/arch-arm1136/clocks243x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/clocks243x.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-arm1136/mem.h b/uart-monitor/include/asm/arch-arm1136/mem.h
deleted file mode 120000
index dd453b2..0000000
--- a/uart-monitor/include/asm/arch-arm1136/mem.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-arm1136/mem.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-arm1136/omap2420.h b/uart-monitor/include/asm/arch-arm1136/omap2420.h
deleted file mode 100644
index 2164b68..0000000
--- a/uart-monitor/include/asm/arch-arm1136/omap2420.h
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) 2005 Texas Instruments, <www.ti.com>
- *
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2420_SYS_H_
-#define _OMAP2420_SYS_H_
-
-#include <asm/arch/sizes.h>
-
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-
-/*
- * 2420 specific Section
- */
-
-/* CONTROL */
-#define OMAP2420_CTRL_BASE (0x48000000)
-#define CONTROL_STATUS (OMAP2420_CTRL_BASE + 0x2F8)
-
-/* TAP information */
-#define OMAP2420_TAP_BASE (0x48014000)
-#define TAP_IDCODE_REG (OMAP2420_TAP_BASE+0x204)
-
-/* GPMC */
-#define OMAP2420_GPMC_BASE (0x6800A000)
-#define GPMC_SYSCONFIG (OMAP2420_GPMC_BASE+0x10)
-#define GPMC_SYSSTATUS (OMAP2420_GPMC_BASE+0x14)
-#define GPMC_IRQENABLE (OMAP2420_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP2420_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP2420_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP2420_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP2420_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP2420_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP2420_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP2420_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP2420_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP2420_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP2420_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP2420_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP2420_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP2420_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP2420_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP2420_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP2420_GPMC_BASE+0xA8)
-
-/* SMS */
-#define OMAP2420_SMS_BASE 0x68008000
-#define SMS_SYSCONFIG (OMAP2420_SMS_BASE+0x10)
-
-/* SDRC */
-#define OMAP2420_SDRC_BASE 0x68009000
-#define SDRC_SYSCONFIG (OMAP2420_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP2420_SDRC_BASE+0x14)
-#define SDRC_SHARING (OMAP2420_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP2420_SDRC_BASE+0x60)
-#define SDRC_DLLA_STATUS (OMAP2420_SDRC_BASE+0x64)
-#define SDRC_DLLB_CTRL (OMAP2420_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP2420_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP2420_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP2420_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP2420_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP2420_SDRC_BASE+0xA0)
-#define SDRC_MCFG_1 (OMAP2420_SDRC_BASE+0xB0)
-#define SDRC_MR_1 (OMAP2420_SDRC_BASE+0xB4)
-#define SDRC_EMR2_1 (OMAP2420_SDRC_BASE+0xBC)
-#define SDRC_ACTIM_CTRLA_1 (OMAP2420_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP2420_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP2420_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP2420_SDRC_BASE+0xA8)
-#define SDRC_RFR_CTRL1 (OMAP2420_SDRC_BASE+0xD4)
-#define SDRC_MANUAL_1 (OMAP2420_SDRC_BASE+0xD8)
-
-#define OMAP2420_SDRC_CS0 0x80000000
-#define OMAP2420_SDRC_CS1 0xA0000000
-
-#define LOADDLL BIT2
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2420_UART1 0x4806A000
-#define OMAP2420_UART2 0x4806C000
-#define OMAP2420_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP2420_GPT1 0x48028000
-#define OMAP2420_GPT2 0x4802A000
-#define OMAP2420_GPT3 0x48078000
-#define OMAP2420_GPT4 0x4807A000
-#define OMAP2420_GPT5 0x4807C000
-#define OMAP2420_GPT6 0x4807E000
-#define OMAP2420_GPT7 0x48080000
-#define OMAP2420_GPT8 0x48082000
-#define OMAP2420_GPT9 0x48084000
-#define OMAP2420_GPT10 0x48086000
-#define OMAP2420_GPT11 0x48088000
-#define OMAP2420_GPT12 0x4808A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE 0x48020000
-#define WD2_BASE 0x48022000
-#define WD3_BASE 0x48024000
-#define WD4_BASE 0x48026000
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP2420_CM_BASE 0x48008000
-#define PRCM_CLKCFG_CTRL (OMAP2420_CM_BASE+0x080)
-#define CM_CLKSEL_MPU (OMAP2420_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP2420_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP2420_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP2420_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP2420_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP2420_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP2420_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP2420_CM_BASE+0x244)
-#define CM_CLKSEL_GFX (OMAP2420_CM_BASE+0x340)
-#define PM_RSTCTRL_WKUP (OMAP2420_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP2420_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP2420_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP2420_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP2420_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP2420_CM_BASE+0x840)
-
-/*
- * H4 specific Section
- */
-
-/*
- * The 2420's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP2420H4)
-/* GPMC */
-#ifdef CONFIG_VIRTIO_A /* Pre version B */
-# define H4_CS0_BASE 0x08000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x04000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#else
-# define H4_CS0_BASE 0x04000000 /* flash (64 Meg aligned) */
-# define H4_CS1_BASE 0x08000000 /* debug board */
-# define H4_CS2_BASE 0x0A000000 /* wifi board */
-#endif
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-/* FPGA on Debug board.*/
-#define ETH_CONTROL_REG (H4_CS1_BASE+0x30b)
-#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
-#endif /* endif CONFIG_2420H4 */
-
-#endif
-
diff --git a/uart-monitor/include/asm/arch-arm1136/omap2430.h b/uart-monitor/include/asm/arch-arm1136/omap2430.h
deleted file mode 100644
index cf2b0f9..0000000
--- a/uart-monitor/include/asm/arch-arm1136/omap2430.h
+++ /dev/null
@@ -1,255 +0,0 @@
-/*
- * (C) Copyright 2004-2005
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP2430_SYS_H_
-#define _OMAP2430_SYS_H_
-
-#include <asm/arch/sizes.h>
-
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-/* device type */
-#define DEVICE_MASK (BIT8|BIT9|BIT10)
-#define TST_DEVICE 0x0
-#define EMU_DEVICE 0x1
-#define HS_DEVICE 0x2
-#define GP_DEVICE 0x3
-
-/*
- * 2430 specific Section
- */
-#define OMAP243X_CORE_L4_IO_BASE 0x48000000
-#define OMAP243X_WAKEUP_L4_IO_BASE 0x49000000
-#define OMAP24XX_L4_IO_BASE OMAP243X_CORE_L4_IO_BASE
-
-
-/* CONTROL */
-#define OMAP24XX_CTRL_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x2000)
-#define CONTROL_STATUS (OMAP24XX_CTRL_BASE + 0x2F8)
-
-/* TAP information */
-#define OMAP24XX_TAP_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0xA000)
-#define TAP_IDCODE_REG (OMAP24XX_TAP_BASE+0x204)
-
-/*
- GPMC : In 2430 NOR and NAND can coexist.
- During NAND booting , NAND is at CS0 and NOR at CS1
- and Debug FPGA is GPMC_CS5
-*/
-#define OMAP24XX_GPMC_BASE (0x6E000000)
-
-#define GPMC_SYSCONFIG (OMAP24XX_GPMC_BASE+0x10)
-#define GPMC_SYSSTATUS (OMAP24XX_GPMC_BASE+0x14)
-#define GPMC_IRQENABLE (OMAP24XX_GPMC_BASE+0x1C)
-#define GPMC_TIMEOUT_CONTROL (OMAP24XX_GPMC_BASE+0x40)
-#define GPMC_CONFIG (OMAP24XX_GPMC_BASE+0x50)
-#define GPMC_CONFIG1_0 (OMAP24XX_GPMC_BASE+0x60)
-#define GPMC_CONFIG2_0 (OMAP24XX_GPMC_BASE+0x64)
-#define GPMC_CONFIG3_0 (OMAP24XX_GPMC_BASE+0x68)
-#define GPMC_CONFIG4_0 (OMAP24XX_GPMC_BASE+0x6C)
-#define GPMC_CONFIG5_0 (OMAP24XX_GPMC_BASE+0x70)
-#define GPMC_CONFIG6_0 (OMAP24XX_GPMC_BASE+0x74)
-#define GPMC_CONFIG7_0 (OMAP24XX_GPMC_BASE+0x78)
-#define GPMC_CONFIG1_1 (OMAP24XX_GPMC_BASE+0x90)
-#define GPMC_CONFIG2_1 (OMAP24XX_GPMC_BASE+0x94)
-#define GPMC_CONFIG3_1 (OMAP24XX_GPMC_BASE+0x98)
-#define GPMC_CONFIG4_1 (OMAP24XX_GPMC_BASE+0x9C)
-#define GPMC_CONFIG5_1 (OMAP24XX_GPMC_BASE+0xA0)
-#define GPMC_CONFIG6_1 (OMAP24XX_GPMC_BASE+0xA4)
-#define GPMC_CONFIG7_1 (OMAP24XX_GPMC_BASE+0xA8)
-#define GPMC_CONFIG1_5 (OMAP24XX_GPMC_BASE+0x150)
-#define GPMC_CONFIG2_5 (OMAP24XX_GPMC_BASE+0x154)
-#define GPMC_CONFIG3_5 (OMAP24XX_GPMC_BASE+0x158)
-#define GPMC_CONFIG4_5 (OMAP24XX_GPMC_BASE+0x15C)
-#define GPMC_CONFIG5_5 (OMAP24XX_GPMC_BASE+0x160)
-#define GPMC_CONFIG6_5 (OMAP24XX_GPMC_BASE+0x164)
-#define GPMC_CONFIG7_5 (OMAP24XX_GPMC_BASE+0x168)
-
-
-/* SMS */
-#define OMAP24XX_SMS_BASE 0x6C000000
-#define SMS_SYSCONFIG (OMAP24XX_SMS_BASE+0x10)
-
-/* SDRC */
-#define OMAP24XX_SDRC_BASE 0x6D000000
-#define OMAP24XX_SDRC_CS0 0x80000000
-#define OMAP24XX_SDRC_CS1 0xA0000000
-#define SDRC_SYSCONFIG (OMAP24XX_SDRC_BASE+0x10)
-#define SDRC_STATUS (OMAP24XX_SDRC_BASE+0x14)
-#define SDRC_SHARING (OMAP24XX_SDRC_BASE+0x44)
-#define SDRC_DLLA_CTRL (OMAP24XX_SDRC_BASE+0x60)
-#define SDRC_DLLA_STATUS (OMAP24XX_SDRC_BASE+0x64)
-#define SDRC_DLLB_CTRL (OMAP24XX_SDRC_BASE+0x68)
-#define SDRC_POWER (OMAP24XX_SDRC_BASE+0x70)
-#define SDRC_MCFG_0 (OMAP24XX_SDRC_BASE+0x80)
-#define SDRC_MR_0 (OMAP24XX_SDRC_BASE+0x84)
-#define SDRC_ACTIM_CTRLA_0 (OMAP24XX_SDRC_BASE+0x9C)
-#define SDRC_ACTIM_CTRLB_0 (OMAP24XX_SDRC_BASE+0xA0)
-#define SDRC_MCFG_1 (OMAP24XX_SDRC_BASE+0xB0)
-#define SDRC_ACTIM_CTRLA_1 (OMAP24XX_SDRC_BASE+0xC4)
-#define SDRC_ACTIM_CTRLB_1 (OMAP24XX_SDRC_BASE+0xC8)
-#define SDRC_RFR_CTRL (OMAP24XX_SDRC_BASE+0xA4)
-#define SDRC_MANUAL_0 (OMAP24XX_SDRC_BASE+0xA8)
-#define SDRC_RFR_CTRL1 (OMAP24XX_SDRC_BASE+0xD4)
-
-#define LOADDLL BIT2
-#define CMD_NOP 0x0
-#define CMD_PRECHARGE 0x1
-#define CMD_AUTOREFRESH 0x2
-#define CMD_ENTR_PWRDOWN 0x3
-#define CMD_EXIT_PWRDOWN 0x4
-#define CMD_ENTR_SRFRSH 0x5
-#define CMD_CKE_HIGH 0x6
-#define CMD_CKE_LOW 0x7
-#define SOFTRESET BIT1
-#define SMART_IDLE (0x2 << 3)
-#define REF_ON_IDLE (0x1 << 6)
-
-
-/* UART */
-#define OMAP2430_UART1 0x4806A000
-#define OMAP2430_UART2 0x4806C000
-#define OMAP2430_UART3 0x4806E000
-
-/* General Purpose Timers */
-#define OMAP24XX_GPT1 (OMAP243X_WAKEUP_L4_IO_BASE+0x18000)
-#define OMAP24XX_GPT2 (OMAP24XX_L4_IO_BASE+0x2A000)
-#define OMAP24XX_GPT3 (OMAP24XX_L4_IO_BASE+0x78000)
-#define OMAP24XX_GPT4 (OMAP24XX_L4_IO_BASE+0x7A000)
-#define OMAP24XX_GPT5 (OMAP24XX_L4_IO_BASE+0x7C000)
-#define OMAP24XX_GPT6 (OMAP24XX_L4_IO_BASE+0x7E000)
-#define OMAP24XX_GPT7 (OMAP24XX_L4_IO_BASE+0x80000)
-#define OMAP24XX_GPT8 (OMAP24XX_L4_IO_BASE+0x82000)
-#define OMAP24XX_GPT9 (OMAP24XX_L4_IO_BASE+0x84000)
-#define OMAP24XX_GPT10 (OMAP24XX_L4_IO_BASE+0x86000)
-#define OMAP24XX_GPT11 (OMAP24XX_L4_IO_BASE+0x88000)
-#define OMAP24XX_GPT12 (OMAP24XX_L4_IO_BASE+0x8A000
-
-/* timer regs offsets (32 bit regs) */
-#define TIDR 0x0 /* r */
-#define TIOCP_CFG 0x10 /* rw */
-#define TISTAT 0x14 /* r */
-#define TISR 0x18 /* rw */
-#define TIER 0x1C /* rw */
-#define TWER 0x20 /* rw */
-#define TCLR 0x24 /* rw */
-#define TCRR 0x28 /* rw */
-#define TLDR 0x2C /* rw */
-#define TTGR 0x30 /* rw */
-#define TWPS 0x34 /* r */
-#define TMAR 0x38 /* rw */
-#define TCAR1 0x3c /* r */
-#define TSICR 0x40 /* rw */
-#define TCAR2 0x44 /* r */
-
-/* WatchDog Timers (1 secure, 3 GP) */
-#define WD1_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x14000)
-#define WD2_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x16000)
-#define WD3_BASE (OMAP24XX_L4_IO_BASE+0x24000) /* not present */
-#define WD4_BASE (OMAP24XX_L4_IO_BASE+0x26000)
-
-/* 32KTIMER */
-#define SYNC_32KTIMER_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x20000)
-#define S32K_CR (SYNC_32KTIMER_BASE+0x10)
-
-#define WWPS 0x34 /* r */
-#define WSPR 0x48 /* rw */
-#define WD_UNLOCK1 0xAAAA
-#define WD_UNLOCK2 0x5555
-
-/* PRCM */
-#define OMAP24XX_CM_BASE (OMAP243X_WAKEUP_L4_IO_BASE+0x06000)
-
-#define PRCM_CLKSRC_CTRL (OMAP24XX_CM_BASE+0x060)
-#define PRCM_CLKOUT_CTRL (OMAP24XX_CM_BASE+0x070)
-#define PRCM_CLKEMUL_CTRL (OMAP24XX_CM_BASE+0x078)
-#define PRCM_CLKCFG_CTRL (OMAP24XX_CM_BASE+0x080)
-#define PRCM_CLKCFG_STATUS (OMAP24XX_CM_BASE+0x084)
-#define CM_CLKSEL_MPU (OMAP24XX_CM_BASE+0x140)
-#define CM_FCLKEN1_CORE (OMAP24XX_CM_BASE+0x200)
-#define CM_FCLKEN2_CORE (OMAP24XX_CM_BASE+0x204)
-#define CM_ICLKEN1_CORE (OMAP24XX_CM_BASE+0x210)
-#define CM_ICLKEN2_CORE (OMAP24XX_CM_BASE+0x214)
-#define CM_CLKSEL1_CORE (OMAP24XX_CM_BASE+0x240)
-#define CM_CLKSEL_WKUP (OMAP24XX_CM_BASE+0x440)
-#define CM_CLKSEL2_CORE (OMAP24XX_CM_BASE+0x244)
-#define CM_FCLKEN_GFX (OMAP24XX_CM_BASE+0x300)
-#define CM_ICLKEN_GFX (OMAP24XX_CM_BASE+0x310)
-#define CM_CLKSEL_GFX (OMAP24XX_CM_BASE+0x340)
-#define RM_RSTCTRL_GFX (OMAP24XX_CM_BASE+0x350)
-#define CM_FCLKEN_WKUP (OMAP24XX_CM_BASE+0x400)
-#define CM_ICLKEN_WKUP (OMAP24XX_CM_BASE+0x410)
-#define PM_RSTCTRL_WKUP (OMAP24XX_CM_BASE+0x450)
-#define CM_CLKEN_PLL (OMAP24XX_CM_BASE+0x500)
-#define CM_IDLEST_CKGEN (OMAP24XX_CM_BASE+0x520)
-#define CM_CLKSEL1_PLL (OMAP24XX_CM_BASE+0x540)
-#define CM_CLKSEL2_PLL (OMAP24XX_CM_BASE+0x544)
-#define CM_CLKSEL_DSP (OMAP24XX_CM_BASE+0x840)
-#define CM_CLKSEL_MDM (OMAP24XX_CM_BASE+0xC40)
-
-/* SMX-APE */
-#define SMX_APE_BASE 0x68000000
-#define PM_RT_APE_BASE_ADDR_ARM (SMX_APE_BASE + 0x10000)
-#define PM_GPMC_BASE_ADDR_ARM (SMX_APE_BASE + 0x12400)
-#define PM_OCM_RAM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12800)
-#define PM_OCM_ROM_BASE_ADDR_ARM (SMX_APE_BASE + 0x12C00)
-
-/* IVA2 */
-#define PM_IVA2_BASE_ADDR_ARM (SMX_APE_BASE + 0x14000)
-
-/*
- * The 2430's chip selects are programmable. The mask ROM
- * does configure CS0 to 0x08000000 before dispatch. So, if
- * you want your code to live below that address, you have to
- * be prepared to jump though hoops, to reset the base address.
- */
-#if defined(CONFIG_OMAP243X)
-
-/* GPMC */
-/* This is being used by the macros in mem.h. PHYS_FLASH_1 is defined to H4_CS0_BASE */
-# define H4_CS1_BASE 0x09000000 /* flash (64 Meg aligned) */
-#define CFG_FLASH_BASE H4_CS1_BASE
-#define DEBUG_BASE 0x08000000
-
-/* base address for indirect vectors (internal boot mode) */
-#define SRAM_OFFSET0 0x40000000
-#define SRAM_OFFSET1 0x00200000
-#define SRAM_OFFSET2 0x0000F800
-#define SRAM_VECT_CODE (SRAM_OFFSET0|SRAM_OFFSET1|SRAM_OFFSET2)
-
-#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
-
-#define PERIFERAL_PORT_BASE 0x480FE003
-
-#endif /* endif CONFIG_2430SDP */
-
-#endif
-
diff --git a/uart-monitor/include/asm/arch-arm1136/sizes.h b/uart-monitor/include/asm/arch-arm1136/sizes.h
deleted file mode 100644
index 3dddd8e..0000000
--- a/uart-monitor/include/asm/arch-arm1136/sizes.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_32K 0x00008000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_31M 0x01F00000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif /* __sizes_h */
-
diff --git a/uart-monitor/include/asm/arch-arm1136/sys_info.h b/uart-monitor/include/asm/arch-arm1136/sys_info.h
deleted file mode 100644
index 94a09cd..0000000
--- a/uart-monitor/include/asm/arch-arm1136/sys_info.h
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * Copyright 2005 (C) Texas Instruments, <www.ti.com>
- * (C) Copyright 2004
- * Texas Instruments, <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _OMAP24XX_SYS_INFO_H_
-#define _OMAP24XX_SYS_INFO_H_
-
-#if 0
-typedef struct h4_system_data {
- /* base board info */
- u32 base_b_rev; /* rev from base board i2c */
- /* cpu board info */
- u32 cpu_b_rev; /* rev from cpu board i2c */
- u32 cpu_b_mux; /* mux type on daughter board */
- u32 cpu_b_ddr_type; /* mem type */
- u32 cpu_b_ddr_speed; /* ddr speed rating */
- u32 cpu_b_switches; /* boot ctrl switch settings */
- /* cpu info */
- u32 cpu_type; /* type of cpu; 2420, 2422, 2430,...*/
- u32 cpu_rev; /* rev of given cpu; ES1, ES2,...*/
-} h4_sys_data;
-
-#endif
-
-#define XDR_POP 5 /* package on package part */
-#define SDR_DISCRETE 4 /* 128M memory SDR module*/
-#define DDR_STACKED 3 /* stacked part on 2422 */
-#define DDR_COMBO 2 /* combo part on cpu daughter card (menalaeus) */
-#define DDR_DISCRETE 1 /* 2x16 parts on daughter card */
-
-#define DDR_100 100 /* type found on most mem d-boards */
-#define DDR_111 111 /* some combo parts */
-#define DDR_133 133 /* most combo, some mem d-boards */
-#define DDR_165 165 /* future parts */
-
-#define CPU_2420 0x2420
-#define CPU_2422 0x2422 /* 2420 + 64M stacked */
-#define CPU_2423 0x2423 /* 2420 + 96M stacked */
-#define CPU_2430 0x2430
-
-/* 242x real hardware:
- * ES1 = rev 0
- * ES2 = rev 1
- * ES2.05 = rev 2
- * ES2.1 = rev 3
- * ES2.1.1 = rev 4
- */
-
-/* 242x code defines:
- * ES1 = 0+1 = 1
- * ES2 = 1+1 = 2
- * ES2.05 = 2+1 = 3
- * ES2.1 = 3+1 = 4
- * Es2.1.1 = 4+1 = 5
- */
-#define CPU_2422_ES1 1
-#define CPU_2422_ES2 2
-#define CPU_2422_ES2_05 3
-#define CPU_2422_ES2_1 4
-#define CPU_2422_ES2_1_1 5
-
-#define CPU_2420_ES1 1
-#define CPU_2420_ES2 2
-#define CPU_2420_ES2_05 3
-#define CPU_2420_ES2_1 4
-#define CPU_2420_ES2_1_1 5
-
-#define CPU_242X_ES1 1
-#define CPU_242X_ES2 2
-#define CPU_242X_ES2_05 3
-#define CPU_242X_ES2_1 4
-#define CPU_242X_ES2_1_1 5
-
-#define CPU_2420_2422_ES1 1
-#define CPU_2420_2422_ES2_1 4
-
-/* 243x real hardware:
- * ES1 = rev 0
- * ES2 = rev 1
- *
- * 243x code defines:
- * ES1 = 0+1 = 1
- * ES2 = 1+1 = 2
- */
-#define CPU_2430_ES1 1
-#define CPU_2430_ES2 2
-
-#ifdef VPOM2430
-# define CPU_2430_VIRTIO 3
-#else
-# define CPU_2430_VIRTIO 1
-#endif
-#define CPU_2430_ZEBU 0xD
-
-#define CPU_2420_CHIPID 0x0B5D9000
-#define CPU_2430_CHIPID 0x0B68A000
-#define CPU_24XX_ID_MASK 0x0FFFF000
-#define CPU_242X_REV_MASK 0xF0000000
-#define CPU_242X_PID_MASK 0x000F0000
-
-#define BOARD_H4_MENELAUS 1
-#define BOARD_H4_SDP 2
-#define BOARD_H4_MENELAUS_HRP 3
-#define BOARD_SDP_2430 4
-
-#define GPMC_MUXED 1
-#define GPMC_NONMUXED 0
-
-#define TYPE_NAND 0x800 /* bit pos for nand in gpmc reg */
-#define TYPE_NOR 0x000
-#define TYPE_ONENAND 0x800
-
-#define WIDTH_8BIT 0x0000
-#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-
-#define I2C_MENELAUS 0x72 /* i2c id for companion chip */
-
-#endif
diff --git a/uart-monitor/include/asm/arch-arm926ejs/sizes.h b/uart-monitor/include/asm/arch-arm926ejs/sizes.h
deleted file mode 100644
index ef0b99b..0000000
--- a/uart-monitor/include/asm/arch-arm926ejs/sizes.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA0 2111-1307
- * USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif /* __sizes_h */
diff --git a/uart-monitor/include/asm/arch-omap3/bits.h b/uart-monitor/include/asm/arch-omap3/bits.h
deleted file mode 120000
index 036fe66..0000000
--- a/uart-monitor/include/asm/arch-omap3/bits.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/bits.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/clocks.h b/uart-monitor/include/asm/arch-omap3/clocks.h
deleted file mode 120000
index 894fadf..0000000
--- a/uart-monitor/include/asm/arch-omap3/clocks.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/clocks.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/clocks343x.h b/uart-monitor/include/asm/arch-omap3/clocks343x.h
deleted file mode 120000
index 92f7376..0000000
--- a/uart-monitor/include/asm/arch-omap3/clocks343x.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/clocks343x.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/cpu.h b/uart-monitor/include/asm/arch-omap3/cpu.h
deleted file mode 120000
index 5c88731..0000000
--- a/uart-monitor/include/asm/arch-omap3/cpu.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/cpu.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S b/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S
deleted file mode 120000
index 803f515..0000000
--- a/uart-monitor/include/asm/arch-omap3/dpll_table_34xx.S
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_34xx.S \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S b/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S
deleted file mode 120000
index e8f2f9b..0000000
--- a/uart-monitor/include/asm/arch-omap3/dpll_table_36xx.S
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/dpll_table_36xx.S \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/mem.h b/uart-monitor/include/asm/arch-omap3/mem.h
deleted file mode 120000
index b49b783..0000000
--- a/uart-monitor/include/asm/arch-omap3/mem.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/mem.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/mmc.h b/uart-monitor/include/asm/arch-omap3/mmc.h
deleted file mode 100644
index 7bceb5f..0000000
--- a/uart-monitor/include/asm/arch-omap3/mmc.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * linux/drivers/mmc/mmc_pxa.h
- *
- * Author: Vladimir Shebordaev, Igor Oblakov
- * Copyright: MontaVista Software Inc.
- *
- * $Id: mmc_pxa.h,v 0.3.1.6 2002/09/25 19:25:48 ted Exp ted $
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __MMC_PXA_P_H__
-#define __MMC_PXA_P_H__
-
-/* PXA-250 MMC controller registers */
-
-/* MMC_STRPCL */
-#define MMC_STRPCL_STOP_CLK (0x0001UL)
-#define MMC_STRPCL_START_CLK (0x0002UL)
-
-/* MMC_STAT */
-
-#define MMC_STAT_ERRORS (MMC_STAT_RES_CRC_ERROR | MMC_STAT_SPI_READ_ERROR_TOKEN\
- | MMC_STAT_CRC_READ_ERROR | MMC_STAT_TIME_OUT_RESPONSE \
- | MMC_STAT_READ_TIME_OUT | MMC_STAT_CRC_WRITE_ERROR)
-
-/* MMC_CLKRT */
-#define MMC_CLKRT_20MHZ (0x0000UL)
-#define MMC_CLKRT_10MHZ (0x0001UL)
-#define MMC_CLKRT_5MHZ (0x0002UL)
-#define MMC_CLKRT_2_5MHZ (0x0003UL)
-#define MMC_CLKRT_1_25MHZ (0x0004UL)
-#define MMC_CLKRT_0_625MHZ (0x0005UL)
-#define MMC_CLKRT_0_3125MHZ (0x0006UL)
-
-/* MMC_SPI */
-#define MMC_SPI_DISABLE (0x00UL)
-#define MMC_SPI_EN (0x01UL)
-#define MMC_SPI_CS_EN (0x01UL << 2)
-#define MMC_SPI_CS_ADDRESS (0x01UL << 3)
-#define MMC_SPI_CRC_ON (0x01UL << 1)
-
-/* MMC_CMDAT */
-#define MMC_CMDAT_MMC_DMA_EN (0x0001UL << 7)
-#define MMC_CMDAT_INIT (0x0001UL << 6)
-#define MMC_CMDAT_BUSY (0x0001UL << 5)
-#define MMC_CMDAT_STREAM (0x0001UL << 4)
-#define MMC_CMDAT_BLOCK (0x0000UL << 4)
-#define MMC_CMDAT_WRITE (0x0001UL << 3)
-#define MMC_CMDAT_READ (0x0000UL << 3)
-#define MMC_CMDAT_DATA_EN (0x0001UL << 2)
-#define MMC_CMDAT_R1 (0x0001UL)
-#define MMC_CMDAT_R2 (0x0002UL)
-#define MMC_CMDAT_R3 (0x0003UL)
-
-/* MMC_RESTO */
-#define MMC_RES_TO_MAX (0x007fUL) /* [6:0] */
-
-/* MMC_RDTO */
-#define MMC_READ_TO_MAX (0x0ffffUL) /* [15:0] */
-
-/* MMC_BLKLEN */
-#define MMC_BLK_LEN_MAX (0x03ffUL) /* [9:0] */
-
-/* MMC_PRTBUF */
-#define MMC_PRTBUF_BUF_PART_FULL (0x01UL)
-#define MMC_PRTBUF_BUF_FULL (0x00UL)
-
-/* MMC_I_MASK */
-#define MMC_I_MASK_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_MASK_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_MASK_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_MASK_STOP_CMD (0x01UL << 3)
-#define MMC_I_MASK_END_CMD_RES (0x01UL << 2)
-#define MMC_I_MASK_PRG_DONE (0x01UL << 1)
-#define MMC_I_MASK_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_MASK_ALL (0x07fUL)
-
-
-/* MMC_I_REG */
-#define MMC_I_REG_TXFIFO_WR_REQ (0x01UL << 6)
-#define MMC_I_REG_RXFIFO_RD_REQ (0x01UL << 5)
-#define MMC_I_REG_CLK_IS_OFF (0x01UL << 4)
-#define MMC_I_REG_STOP_CMD (0x01UL << 3)
-#define MMC_I_REG_END_CMD_RES (0x01UL << 2)
-#define MMC_I_REG_PRG_DONE (0x01UL << 1)
-#define MMC_I_REG_DATA_TRAN_DONE (0x01UL)
-#define MMC_I_REG_ALL (0x007fUL)
-
-/* MMC_CMD */
-#define MMC_CMD_INDEX_MAX (0x006fUL) /* [5:0] */
-#define CMD(x) (x)
-
-#define MMC_DEFAULT_RCA 1
-
-#define MMC_BLOCK_SIZE 512
-#define MMC_CMD_RESET 0
-#define MMC_CMD_SEND_OP_COND 1
-#define MMC_CMD_ALL_SEND_CID 2
-#define MMC_CMD_SET_RCA 3
-#define MMC_CMD_SEND_CSD 9
-#define MMC_CMD_SEND_CID 10
-#define MMC_CMD_SEND_STATUS 13
-#define MMC_CMD_SET_BLOCKLEN 16
-#define MMC_CMD_READ_BLOCK 17
-#define MMC_CMD_RD_BLK_MULTI 18
-#define MMC_CMD_WRITE_BLOCK 24
-
-#define MMC_MAX_BLOCK_SIZE 512
-
-#define MMC_R1_IDLE_STATE 0x01
-#define MMC_R1_ERASE_STATE 0x02
-#define MMC_R1_ILLEGAL_CMD 0x04
-#define MMC_R1_COM_CRC_ERR 0x08
-#define MMC_R1_ERASE_SEQ_ERR 0x01
-#define MMC_R1_ADDR_ERR 0x02
-#define MMC_R1_PARAM_ERR 0x04
-
-#define MMC_R1B_WP_ERASE_SKIP 0x0002
-#define MMC_R1B_ERR 0x0004
-#define MMC_R1B_CC_ERR 0x0008
-#define MMC_R1B_CARD_ECC_ERR 0x0010
-#define MMC_R1B_WP_VIOLATION 0x0020
-#define MMC_R1B_ERASE_PARAM 0x0040
-#define MMC_R1B_OOR 0x0080
-#define MMC_R1B_IDLE_STATE 0x0100
-#define MMC_R1B_ERASE_RESET 0x0200
-#define MMC_R1B_ILLEGAL_CMD 0x0400
-#define MMC_R1B_COM_CRC_ERR 0x0800
-#define MMC_R1B_ERASE_SEQ_ERR 0x1000
-#define MMC_R1B_ADDR_ERR 0x2000
-#define MMC_R1B_PARAM_ERR 0x4000
-
-typedef struct mmc_cid {
-/* FIXME: BYTE_ORDER */
- unsigned char year:4,
- month:4;
- unsigned char sn[3];
- unsigned char fwrev:4,
- hwrev:4;
- unsigned char name[6];
- unsigned char id[3];
-} mmc_cid_t;
-
-typedef struct mmc_csd
-{
- unsigned char ecc:2,
- file_format:2,
- tmp_write_protect:1,
- perm_write_protect:1,
- copy:1,
- file_format_grp:1;
- unsigned long int content_prot_app:1,
- rsvd3:4,
- write_bl_partial:1,
- write_bl_len:4,
- r2w_factor:3,
- default_ecc:2,
- wp_grp_enable:1,
- wp_grp_size:5,
- erase_grp_mult:5,
- erase_grp_size:5,
- c_size_mult1:3,
- vdd_w_curr_max:3,
- vdd_w_curr_min:3,
- vdd_r_curr_max:3,
- vdd_r_curr_min:3,
- c_size:12,
- rsvd2:2,
- dsr_imp:1,
- read_blk_misalign:1,
- write_blk_misalign:1,
- read_bl_partial:1;
-
- unsigned short read_bl_len:4,
- ccc:12;
- unsigned char tran_speed;
- unsigned char nsac;
- unsigned char taac;
- unsigned char rsvd1:2,
- spec_vers:4,
- csd_structure:2;
-} mmc_csd_t;
-
-
-#endif /* __MMC_PXA_P_H__ */
diff --git a/uart-monitor/include/asm/arch-omap3/mux.h b/uart-monitor/include/asm/arch-omap3/mux.h
deleted file mode 120000
index a745fbd..0000000
--- a/uart-monitor/include/asm/arch-omap3/mux.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/mux.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/omap3430.h b/uart-monitor/include/asm/arch-omap3/omap3430.h
deleted file mode 120000
index 69502f2..0000000
--- a/uart-monitor/include/asm/arch-omap3/omap3430.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/omap3430.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/rev.h b/uart-monitor/include/asm/arch-omap3/rev.h
deleted file mode 120000
index 66918c9..0000000
--- a/uart-monitor/include/asm/arch-omap3/rev.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/rev.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/sizes.h b/uart-monitor/include/asm/arch-omap3/sizes.h
deleted file mode 120000
index 4eda715..0000000
--- a/uart-monitor/include/asm/arch-omap3/sizes.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sizes.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/sys_info.h b/uart-monitor/include/asm/arch-omap3/sys_info.h
deleted file mode 120000
index 2e4d1d0..0000000
--- a/uart-monitor/include/asm/arch-omap3/sys_info.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sys_info.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/arch-omap3/sys_proto.h b/uart-monitor/include/asm/arch-omap3/sys_proto.h
deleted file mode 120000
index 3a032c8..0000000
--- a/uart-monitor/include/asm/arch-omap3/sys_proto.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../../u-boot/include/asm-arm/arch-omap3/sys_proto.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/atomic.h b/uart-monitor/include/asm/atomic.h
deleted file mode 100644
index ba9e4b7..0000000
--- a/uart-monitor/include/asm/atomic.h
+++ /dev/null
@@ -1,113 +0,0 @@
-/*
- * linux/include/asm-arm/atomic.h
- *
- * Copyright (c) 1996 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 27-06-1996 RMK Created
- * 13-04-1997 RMK Made functions atomic!
- * 07-12-1997 RMK Upgraded for v2.1.
- * 26-08-1998 PJB Added #ifdef __KERNEL__
- */
-#ifndef __ASM_ARM_ATOMIC_H
-#define __ASM_ARM_ATOMIC_H
-
-#include <linux/config.h>
-
-#ifdef CONFIG_SMP
-#error SMP not supported
-#endif
-
-typedef struct { volatile int counter; } atomic_t;
-
-#define ATOMIC_INIT(i) { (i) }
-
-#ifdef __KERNEL__
-#include <asm/proc/system.h>
-
-#define atomic_read(v) ((v)->counter)
-#define atomic_set(v,i) (((v)->counter) = (i))
-
-static inline void atomic_add(int i, volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter += i;
- local_irq_restore(flags);
-}
-
-static inline void atomic_sub(int i, volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter -= i;
- local_irq_restore(flags);
-}
-
-static inline void atomic_inc(volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter += 1;
- local_irq_restore(flags);
-}
-
-static inline void atomic_dec(volatile atomic_t *v)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- v->counter -= 1;
- local_irq_restore(flags);
-}
-
-static inline int atomic_dec_and_test(volatile atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val -= 1;
- local_irq_restore(flags);
-
- return val == 0;
-}
-
-static inline int atomic_add_negative(int i, volatile atomic_t *v)
-{
- unsigned long flags;
- int val;
-
- local_irq_save(flags);
- val = v->counter;
- v->counter = val += i;
- local_irq_restore(flags);
-
- return val < 0;
-}
-
-static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- *addr &= ~mask;
- local_irq_restore(flags);
-}
-
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
-
-#endif
-#endif
diff --git a/uart-monitor/include/asm/byteorder.h b/uart-monitor/include/asm/byteorder.h
deleted file mode 120000
index be6afe8..0000000
--- a/uart-monitor/include/asm/byteorder.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/asm-arm/byteorder.h \ No newline at end of file
diff --git a/uart-monitor/include/asm/posix_types.h b/uart-monitor/include/asm/posix_types.h
deleted file mode 100644
index c412486..0000000
--- a/uart-monitor/include/asm/posix_types.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * linux/include/asm-arm/posix_types.h
- *
- * Copyright (C) 1996-1998 Russell King.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Changelog:
- * 27-06-1996 RMK Created
- */
-#ifndef __ARCH_ARM_POSIX_TYPES_H
-#define __ARCH_ARM_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_dev_t;
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned int __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(fd, fdsetp) \
- (((fd_set *)fdsetp)->fds_bits[fd >> 5] |= (1<<(fd & 31)))
-
-#undef __FD_CLR
-#define __FD_CLR(fd, fdsetp) \
- (((fd_set *)fdsetp)->fds_bits[fd >> 5] &= ~(1<<(fd & 31)))
-
-#undef __FD_ISSET
-#define __FD_ISSET(fd, fdsetp) \
- ((((fd_set *)fdsetp)->fds_bits[fd >> 5] & (1<<(fd & 31))) != 0)
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) \
- (memset (fdsetp, 0, sizeof (*(fd_set *)fdsetp)))
-
-#endif
-
-#endif
diff --git a/uart-monitor/include/asm/setup.h b/uart-monitor/include/asm/setup.h
deleted file mode 100644
index 89df4dc..0000000
--- a/uart-monitor/include/asm/setup.h
+++ /dev/null
@@ -1,269 +0,0 @@
-/*
- * linux/include/asm/setup.h
- *
- * Copyright (C) 1997-1999 Russell King
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * Structure passed to kernel to tell it about the
- * hardware it's running on. See linux/Documentation/arm/Setup
- * for more info.
- *
- * NOTE:
- * This file contains two ways to pass information from the boot
- * loader to the kernel. The old struct param_struct is deprecated,
- * but it will be kept in the kernel for 5 years from now
- * (2001). This will allow boot loaders to convert to the new struct
- * tag way.
- */
-#ifndef __ASMARM_SETUP_H
-#define __ASMARM_SETUP_H
-
-/*
- * Usage:
- * - do not go blindly adding fields, add them at the end
- * - when adding fields, don't rely on the address until
- * a patch from me has been released
- * - unused fields should be zero (for future expansion)
- * - this structure is relatively short-lived - only
- * guaranteed to contain useful data in setup_arch()
- */
-#define COMMAND_LINE_SIZE 1024
-
-/* This is the old deprecated way to pass parameters to the kernel */
-struct param_struct {
- union {
- struct {
- unsigned long page_size; /* 0 */
- unsigned long nr_pages; /* 4 */
- unsigned long ramdisk_size; /* 8 */
- unsigned long flags; /* 12 */
-#define FLAG_READONLY 1
-#define FLAG_RDLOAD 4
-#define FLAG_RDPROMPT 8
- unsigned long rootdev; /* 16 */
- unsigned long video_num_cols; /* 20 */
- unsigned long video_num_rows; /* 24 */
- unsigned long video_x; /* 28 */
- unsigned long video_y; /* 32 */
- unsigned long memc_control_reg; /* 36 */
- unsigned char sounddefault; /* 40 */
- unsigned char adfsdrives; /* 41 */
- unsigned char bytes_per_char_h; /* 42 */
- unsigned char bytes_per_char_v; /* 43 */
- unsigned long pages_in_bank[4]; /* 44 */
- unsigned long pages_in_vram; /* 60 */
- unsigned long initrd_start; /* 64 */
- unsigned long initrd_size; /* 68 */
- unsigned long rd_start; /* 72 */
- unsigned long system_rev; /* 76 */
- unsigned long system_serial_low; /* 80 */
- unsigned long system_serial_high; /* 84 */
- unsigned long mem_fclk_21285; /* 88 */
- } s;
- char unused[256];
- } u1;
- union {
- char paths[8][128];
- struct {
- unsigned long magic;
- char n[1024 - sizeof(unsigned long)];
- } s;
- } u2;
- char commandline[COMMAND_LINE_SIZE];
-};
-
-
-/*
- * The new way of passing information: a list of tagged entries
- */
-
-/* The list ends with an ATAG_NONE node. */
-#define ATAG_NONE 0x00000000
-
-struct tag_header {
- u32 size;
- u32 tag;
-};
-
-/* The list must start with an ATAG_CORE node */
-#define ATAG_CORE 0x54410001
-
-struct tag_core {
- u32 flags; /* bit 0 = read-only */
- u32 pagesize;
- u32 rootdev;
-};
-
-/* it is allowed to have multiple ATAG_MEM nodes */
-#define ATAG_MEM 0x54410002
-
-struct tag_mem32 {
- u32 size;
- u32 start; /* physical start address */
-};
-
-/* VGA text type displays */
-#define ATAG_VIDEOTEXT 0x54410003
-
-struct tag_videotext {
- u8 x;
- u8 y;
- u16 video_page;
- u8 video_mode;
- u8 video_cols;
- u16 video_ega_bx;
- u8 video_lines;
- u8 video_isvga;
- u16 video_points;
-};
-
-/* describes how the ramdisk will be used in kernel */
-#define ATAG_RAMDISK 0x54410004
-
-struct tag_ramdisk {
- u32 flags; /* bit 0 = load, bit 1 = prompt */
- u32 size; /* decompressed ramdisk size in _kilo_ bytes */
- u32 start; /* starting block of floppy-based RAM disk image */
-};
-
-/* describes where the compressed ramdisk image lives (virtual address) */
-/*
- * this one accidentally used virtual addresses - as such,
- * its depreciated.
- */
-#define ATAG_INITRD 0x54410005
-
-/* describes where the compressed ramdisk image lives (physical address) */
-#define ATAG_INITRD2 0x54420005
-
-struct tag_initrd {
- u32 start; /* physical start address */
- u32 size; /* size of compressed ramdisk image in bytes */
-};
-
-/* board serial number. "64 bits should be enough for everybody" */
-#define ATAG_SERIAL 0x54410006
-
-struct tag_serialnr {
- u32 low;
- u32 high;
-};
-
-/* board revision */
-#define ATAG_REVISION 0x54410007
-
-struct tag_revision {
- u32 rev;
-};
-
-/* initial values for vesafb-type framebuffers. see struct screen_info
- * in include/linux/tty.h
- */
-#define ATAG_VIDEOLFB 0x54410008
-
-struct tag_videolfb {
- u16 lfb_width;
- u16 lfb_height;
- u16 lfb_depth;
- u16 lfb_linelength;
- u32 lfb_base;
- u32 lfb_size;
- u8 red_size;
- u8 red_pos;
- u8 green_size;
- u8 green_pos;
- u8 blue_size;
- u8 blue_pos;
- u8 rsvd_size;
- u8 rsvd_pos;
-};
-
-/* command line: \0 terminated string */
-#define ATAG_CMDLINE 0x54410009
-
-struct tag_cmdline {
- char cmdline[1]; /* this is the minimum size */
-};
-
-/* acorn RiscPC specific information */
-#define ATAG_ACORN 0x41000101
-
-struct tag_acorn {
- u32 memc_control_reg;
- u32 vram_pages;
- u8 sounddefault;
- u8 adfsdrives;
-};
-
-/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */
-#define ATAG_MEMCLK 0x41000402
-
-struct tag_memclk {
- u32 fmemclk;
-};
-
-struct tag {
- struct tag_header hdr;
- union {
- struct tag_core core;
- struct tag_mem32 mem;
- struct tag_videotext videotext;
- struct tag_ramdisk ramdisk;
- struct tag_initrd initrd;
- struct tag_serialnr serialnr;
- struct tag_revision revision;
- struct tag_videolfb videolfb;
- struct tag_cmdline cmdline;
-
- /*
- * Acorn specific
- */
- struct tag_acorn acorn;
-
- /*
- * DC21285 specific
- */
- struct tag_memclk memclk;
- } u;
-};
-
-struct tagtable {
- u32 tag;
- int (*parse)(const struct tag *);
-};
-
-#define __tag __attribute__((unused, __section__(".taglist")))
-#define __tagtable(tag, fn) \
-static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-#define tag_member_present(tag,member) \
- ((unsigned long)(&((struct tag *)0L)->member + 1) \
- <= (tag)->hdr.size * 4)
-
-#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size))
-#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
-
-#define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
-
-/*
- * Memory map description
- */
-#define NR_BANKS 8
-
-struct meminfo {
- int nr_banks;
- unsigned long end;
- struct {
- unsigned long start;
- unsigned long size;
- int node;
- } bank[NR_BANKS];
-};
-
-extern struct meminfo meminfo;
-
-#endif
diff --git a/uart-monitor/include/asm/sizes.h b/uart-monitor/include/asm/sizes.h
deleted file mode 100644
index f8d92ca..0000000
--- a/uart-monitor/include/asm/sizes.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- * from .s file by awk -f s2h.awk
- */
-/* Size defintions
- * Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h 1
-
-/* handy sizes */
-#define SZ_1K 0x00000400
-#define SZ_4K 0x00001000
-#define SZ_8K 0x00002000
-#define SZ_16K 0x00004000
-#define SZ_64K 0x00010000
-#define SZ_128K 0x00020000
-#define SZ_256K 0x00040000
-#define SZ_512K 0x00080000
-
-#define SZ_1M 0x00100000
-#define SZ_2M 0x00200000
-#define SZ_4M 0x00400000
-#define SZ_8M 0x00800000
-#define SZ_16M 0x01000000
-#define SZ_32M 0x02000000
-#define SZ_64M 0x04000000
-#define SZ_128M 0x08000000
-#define SZ_256M 0x10000000
-#define SZ_512M 0x20000000
-
-#define SZ_1G 0x40000000
-#define SZ_2G 0x80000000
-
-#endif
-
-/* END */
diff --git a/uart-monitor/include/asm/string.h b/uart-monitor/include/asm/string.h
deleted file mode 100644
index c3ea582..0000000
--- a/uart-monitor/include/asm/string.h
+++ /dev/null
@@ -1,47 +0,0 @@
-#ifndef __ASM_ARM_STRING_H
-#define __ASM_ARM_STRING_H
-
-/*
- * We don't do inline string functions, since the
- * optimised inline asm versions are not small.
- */
-
-#undef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#undef __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#undef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMZERO
-#undef __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-#if 0
-extern void __memzero(void *ptr, __kernel_size_t n);
-
-#define memset(p,v,n) \
- ({ \
- if ((n) != 0) { \
- if (__builtin_constant_p((v)) && (v) == 0) \
- __memzero((p),(n)); \
- else \
- memset((p),(v),(n)); \
- } \
- (p); \
- })
-
-#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); })
-#else
-extern void memzero(void *ptr, __kernel_size_t n);
-#endif
-
-#endif
diff --git a/uart-monitor/include/asm/types.h b/uart-monitor/include/asm/types.h
deleted file mode 100644
index 13e9806..0000000
--- a/uart-monitor/include/asm/types.h
+++ /dev/null
@@ -1,50 +0,0 @@
-#ifndef __ASM_ARM_TYPES_H
-#define __ASM_ARM_TYPES_H
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __signed__ long long __s64;
-typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-#endif /* __KERNEL__ */
-
-#endif
diff --git a/uart-monitor/include/asm/x-load-arm.h b/uart-monitor/include/asm/x-load-arm.h
deleted file mode 100644
index eef268e..0000000
--- a/uart-monitor/include/asm/x-load-arm.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _X_LOAD_ARM_H_
-#define _X_LOAD_ARM_H_ 1
-
-/* for the following variables, see start.S */
-extern ulong _armboot_start; /* code start */
-extern ulong _bss_start; /* code + data end == BSS start */
-extern ulong _bss_end; /* BSS end */
-
-#endif /* _X_LOAD_ARM_H_ */
diff --git a/uart-monitor/include/command.h b/uart-monitor/include/command.h
deleted file mode 120000
index f4bd05e..0000000
--- a/uart-monitor/include/command.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/command.h \ No newline at end of file
diff --git a/uart-monitor/include/common.h b/uart-monitor/include/common.h
deleted file mode 100644
index fe8bc90..0000000
--- a/uart-monitor/include/common.h
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- * (C) Copyright 2004
- * Texas Instruments
- *
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __COMMON_H_
-#define __COMMON_H_ 1
-
-#undef _LINUX_CONFIG_H
-#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
-
-typedef unsigned char uchar;
-typedef volatile unsigned long vu_long;
-typedef volatile unsigned short vu_short;
-typedef volatile unsigned char vu_char;
-
-#include <config.h>
-#include <linux/types.h>
-#include <stdarg.h>
-
-#ifdef CONFIG_ARM
-#define asmlinkage /* nothing */
-#endif
-
-
-#ifdef CONFIG_ARM
-# include <asm/setup.h>
-# include <asm/x-load-arm.h> /* ARM version to be fixed! */
-#endif /* CONFIG_ARM */
-
-#ifdef CFG_PRINTF
-#define printf(fmt,args...) serial_printf (fmt ,##args)
-#define getc() serial_getc()
-#else
-#define printf(fmt,args...)
-#define getc() ' '
-#endif /* CFG_PRINTF */
-
-/* board/$(BOARD)/$(BOARD).c */
-int board_init (void);
-int nand_init (void);
-int mmc_boot (void);
-void board_hang (void);
-
-/* cpu/$(CPU)/cpu.c */
-int cpu_init (void);
-#ifdef CFG_UDELAY
-void udelay (unsigned long usec);
-#endif
-
-/* nand driver */
-#define NAND_CMD_READ0 0
-#define NAND_CMD_READ1 1
-#define NAND_CMD_READOOB 0x50
-#define NAND_CMD_STATUS 0x70
-#define NAND_CMD_READID 0x90
-#define NAND_CMD_RESET 0xff
-
-/* Extended Commands for Large page devices */
-#define NAND_CMD_READSTART 0x30
-
-int nand_chip(void);
-int nand_read_block(uchar *buf, ulong block_addr);
-
-int onenand_chip(void);
-int onenand_read_block(unsigned char *buf, ulong block);
-
-
-#ifdef CFG_PRINTF
-
-/* serial driver */
-int serial_init (void);
-void serial_setbrg (void);
-void serial_putc (const char);
-void serial_puts (const char *);
-int serial_getc (void);
-int serial_tstc (void);
-
-/* lib/printf.c */
-void serial_printf (const char *fmt, ...);
-#endif
-
-/* lib/crc.c */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code);
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc);
-
-/* lib/board.c */
-void hang (void) __attribute__ ((noreturn));
-#endif /* __COMMON_H_ */
diff --git a/uart-monitor/include/configs/omap3430labrador.h b/uart-monitor/include/configs/omap3430labrador.h
deleted file mode 100644
index 53b72f1..0000000
--- a/uart-monitor/include/configs/omap3430labrador.h
+++ /dev/null
@@ -1,224 +0,0 @@
-/*
- * (C) Copyright 2006
- * Texas Instruments <www.ti.com>
- * Richard Woodruff <r-woodruff2@ti.com>
- *
- * X-Loader Configuation settings for the TI OMAP SDP3430 board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/* configure for GTA04 with DM3730 */
-#define CONFIG_OMAP36XX 1 /* or 36XX (DM3730) */
-#define PRCM_CLK_CFG2_400MHZ 1
-
-/* serial printf facility takes about 3.5K */
-#define CFG_PRINTF
-//#undef CFG_PRINTF
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARMCORTEXA8 1 /* This is an ARM V7 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP34XX 1 /* which is a 34XX */
-#define CONFIG_OMAP3430 1 /* which is in a 3430 */
-#define CONFIG_3430LABRADOR 1 /* working on Labrador */
-//#define CONFIG_3430_AS_3410 1 /* true for 3430 in 3410 mode */
-
-#include <asm/arch/cpu.h> /* get chip and board defs */
-
-/* uncomment it if you need timer based udelay(). it takes about 250 bytes */
-//#define CFG_UDELAY
-
-/* Clock Defines */
-#define V_OSCK 26000000 /* Clock output from T2 */
-#define V_SCLK V_OSCK
-
-//#define PRCM_CLK_CFG2_266MHZ 1 /* VDD2=1.15v - 133MHz DDR */
-#define PRCM_CLK_CFG2_332MHZ 1 /* VDD2=1.15v - 166MHz DDR */
-#define PRCM_PCLK_OPP2 1 /* ARM=500MHz - VDD1=1.20v */
-
-/* Memory type */
-#define CFG_3430SDRAM_DDR 1
-
-/* The actual register values are defined in u-boot- mem.h */
-/* SDRAM Bank Allocation method */
-//#define SDRC_B_R_C 1
-//#define SDRC_B1_R_B0_C 1
-#define SDRC_R_B_C 1
-
-/* Boot type */
-#define CFG_NAND 1
-//#define CFG_ONENAND 1
-
-# define NAND_BASE_ADR NAND_BASE /* NAND flash */
-# define ONENAND_BASE ONENAND_MAP /* OneNand flash */
-
-/* To use the 256/512 byte s/w ecc define CFG_SW_ECC_(256/512) */
-/* Use the 512 byte hw ecc in rom code layout */
-#define NAND_HW_ROMCODE_ECC_LAYOUT
-
-#ifdef CFG_NAND
-#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M /* u = ofdon't need so much for nand port */
-#define OMAP34XX_GPMC_CS0_MAP NAND_BASE_ADR
-#else
-#define OMAP34XX_GPMC_CS0_SIZE GPMC_SIZE_128M
-#define OMAP34XX_GPMC_CS0_MAP ONENAND_BASE
-#define ONENAND_ADDR ONENAND_BASE /* physical address of OneNAND at CS0*/
-#endif
-
-
-#ifdef CFG_PRINTF
-
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE (-4)
-#define CFG_NS16550_CLK (48000000)
-#define CFG_NS16550_COM3 OMAP34XX_UART3
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL3 3 /* UART3 on board */
-#define CONFIG_CONS_INDEX 3
-
-#define CONFIG_BAUDRATE 115200
-#define CFG_PBSIZE 256
-
-#endif /* CFG_PRINTF */
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LOADADDR 0x80008000
-
-#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
-
-/*-----------------------------------------------------------------------
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-
-#ifdef CFG_NAND
-
-/*-----------------------------------------------------------------------
- * Board NAND Info.
- */
-
-
-#define CFG_NAND_K9F1G08R0A /* Micron 16-bit 256MB chip large page NAND chip*/
-#define NAND_16BIT
-
-/* NAND is partitioned:
- * 0x00000000 - 0x0007FFFF Booting Image
- * 0x00080000 - 0x000BFFFF U-Boot Image
- * 0x000C0000 - 0x000FFFFF U-Boot Env Data (X-loader doesn't care)
- * 0x00100000 - 0x002FFFFF Kernel Image
- * 0x00300000 - 0x08000000 depends on application
- */
-#define NAND_UBOOT_START 0x0080000 /* Leaving first 4 blocks for x-load */
-#define NAND_UBOOT_END 0x00C0000 /* Giving a space of 2 blocks = 256KB */
-#define NAND_BLOCK_SIZE 0x20000
-
-#define GPMC_CONFIG (OMAP34XX_GPMC_BASE+0x50)
-#define GPMC_NAND_COMMAND_0 (OMAP34XX_GPMC_BASE+0x7C)
-#define GPMC_NAND_ADDRESS_0 (OMAP34XX_GPMC_BASE+0x80)
-#define GPMC_NAND_DATA_0 (OMAP34XX_GPMC_BASE+0x84)
-
-#ifdef NAND_16BIT
-#define WRITE_NAND_COMMAND(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_COMMAND_0 = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_ADDRESS_0 = d;} while(0)
-#define WRITE_NAND(d, adr) \
- do {*(volatile u16 *)GPMC_NAND_DATA_0 = d;} while(0)
-#define READ_NAND(adr) \
- (*(volatile u16 *)GPMC_NAND_DATA_0)
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF() \
- do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0)
-#define NAND_WP_ON() \
- do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0)
-
-#else /* to support 8-bit NAND devices */
-#define WRITE_NAND_COMMAND(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_COMMAND_0 = d;} while(0)
-#define WRITE_NAND_ADDRESS(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_ADDRESS_0 = d;} while(0)
-#define WRITE_NAND(d, adr) \
- do {*(volatile u8 *)GPMC_NAND_DATA_0 = d;} while(0)
-#define READ_NAND(adr) \
- (*(volatile u8 *)GPMC_NAND_DATA_0);
-#define NAND_WAIT_READY()
-#define NAND_WP_OFF() \
- do {*(volatile u32 *)(GPMC_CONFIG) |= 0x00000010;} while(0)
-#define NAND_WP_ON() \
- do {*(volatile u32 *)(GPMC_CONFIG) &= ~0x00000010;} while(0)
-
-#endif
-
-#define NAND_CTL_CLRALE(adr)
-#define NAND_CTL_SETALE(adr)
-#define NAND_CTL_CLRCLE(adr)
-#define NAND_CTL_SETCLE(adr)
-#define NAND_DISABLE_CE()
-#define NAND_ENABLE_CE()
-
-#else
-/*-----------------------------------------------------------------------
- * Board oneNAND Info.
- */
-#define CFG_SYNC_BURST_READ 1
-
-/* OneNAND is partitioned:
- * 0x0000000 - 0x0080000 X-Loader
- * 0x0080000 - 0x00c0000 U-boot Image
- * 0x00c0000 - 0x00e0000 U-Boot Env Data (X-loader doesn't care)
- * 0x00e0000 - 0x0120000 Kernel Image
- * 0x0120000 - 0x4000000 depends on application
- */
-
-#define ONENAND_START_BLOCK 4
-#define ONENAND_END_BLOCK 6
-#define ONENAND_PAGE_SIZE 2048 /* 2KB */
-#define ONENAND_BLOCK_SIZE 0x20000 /* 128KB */
-
-#endif /* oneNAND */
-
-/* Enable CONFIG_MMC macro if MMC boot support is required */
-/* if loadb and MMC support are enabled together, the size of x-loader
- (code + data) becomes greater than 32K - the size of SRAM. So don't enable
- them together.
- */
-#if !defined(START_LOADB_DOWNLOAD)
-#define CONFIG_MMC 1
-#endif
-#if defined(CONFIG_MMC)
- #define CFG_CMD_MMC 1
- #define CFG_CMD_FAT 1
-#endif
-
-#endif /* __CONFIG_H */
-
diff --git a/uart-monitor/include/fat.h b/uart-monitor/include/fat.h
deleted file mode 120000
index aeeb5a0..0000000
--- a/uart-monitor/include/fat.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/fat.h \ No newline at end of file
diff --git a/uart-monitor/include/ide.h b/uart-monitor/include/ide.h
deleted file mode 120000
index 9c84a17..0000000
--- a/uart-monitor/include/ide.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/ide.h \ No newline at end of file
diff --git a/uart-monitor/include/linux/byteorder b/uart-monitor/include/linux/byteorder
deleted file mode 120000
index f000c3b..0000000
--- a/uart-monitor/include/linux/byteorder
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/byteorder \ No newline at end of file
diff --git a/uart-monitor/include/linux/config.h b/uart-monitor/include/linux/config.h
deleted file mode 100644
index a0194cb..0000000
--- a/uart-monitor/include/linux/config.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef _LINUX_CONFIG_H
-#define _LINUX_CONFIG_H
-
-/* #include <linux/autoconf.h> */
-
-#endif
diff --git a/uart-monitor/include/linux/posix_types.h b/uart-monitor/include/linux/posix_types.h
deleted file mode 100644
index bd37e1f..0000000
--- a/uart-monitor/include/linux/posix_types.h
+++ /dev/null
@@ -1,48 +0,0 @@
-#ifndef _LINUX_POSIX_TYPES_H
-#define _LINUX_POSIX_TYPES_H
-
-#include <linux/stddef.h>
-
-/*
- * This allows for 1024 file descriptors: if NR_OPEN is ever grown
- * beyond that you'll have to change this too. But 1024 fd's seem to be
- * enough even for such "real" unices like OSF/1, so hopefully this is
- * one limit that doesn't have to be changed [again].
- *
- * Note that POSIX wants the FD_CLEAR(fd,fdsetp) defines to be in
- * <sys/time.h> (and thus <linux/time.h>) - but this is a more logical
- * place for them. Solved by having dummy defines in <sys/time.h>.
- */
-
-/*
- * Those macros may have been defined in <gnu/types.h>. But we always
- * use the ones here.
- */
-#undef __NFDBITS
-#define __NFDBITS (8 * sizeof(unsigned long))
-
-#undef __FD_SETSIZE
-#define __FD_SETSIZE 1024
-
-#undef __FDSET_LONGS
-#define __FDSET_LONGS (__FD_SETSIZE/__NFDBITS)
-
-#undef __FDELT
-#define __FDELT(d) ((d) / __NFDBITS)
-
-#undef __FDMASK
-#define __FDMASK(d) (1UL << ((d) % __NFDBITS))
-
-typedef struct {
- unsigned long fds_bits [__FDSET_LONGS];
-} __kernel_fd_set;
-
-/* Type of a signal handler. */
-typedef void (*__kernel_sighandler_t)(int);
-
-/* Type of a SYSV IPC key. */
-typedef int __kernel_key_t;
-
-#include <asm/posix_types.h>
-
-#endif /* _LINUX_POSIX_TYPES_H */
diff --git a/uart-monitor/include/linux/stat.h b/uart-monitor/include/linux/stat.h
deleted file mode 120000
index 3bc0369..0000000
--- a/uart-monitor/include/linux/stat.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/stat.h \ No newline at end of file
diff --git a/uart-monitor/include/linux/stddef.h b/uart-monitor/include/linux/stddef.h
deleted file mode 100644
index 81e34c2..0000000
--- a/uart-monitor/include/linux/stddef.h
+++ /dev/null
@@ -1,18 +0,0 @@
-#ifndef _LINUX_STDDEF_H
-#define _LINUX_STDDEF_H
-
-#undef NULL
-#if defined(__cplusplus)
-#define NULL 0
-#else
-#define NULL ((void *)0)
-#endif
-
-#ifndef _SIZE_T
-#include <linux/types.h>
-#endif
-
-#undef offsetof
-#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
-
-#endif
diff --git a/uart-monitor/include/linux/time.h b/uart-monitor/include/linux/time.h
deleted file mode 120000
index d630a65..0000000
--- a/uart-monitor/include/linux/time.h
+++ /dev/null
@@ -1 +0,0 @@
-../../../u-boot/include/linux/time.h \ No newline at end of file
diff --git a/uart-monitor/include/linux/types.h b/uart-monitor/include/linux/types.h
deleted file mode 100644
index df4808f..0000000
--- a/uart-monitor/include/linux/types.h
+++ /dev/null
@@ -1,130 +0,0 @@
-#ifndef _LINUX_TYPES_H
-#define _LINUX_TYPES_H
-
-#ifdef __KERNEL__
-#include <linux/config.h>
-#endif
-
-#include <linux/posix_types.h>
-#include <asm/types.h>
-
-#ifndef __KERNEL_STRICT_NAMES
-
-typedef __kernel_fd_set fd_set;
-typedef __kernel_dev_t dev_t;
-typedef __kernel_ino_t ino_t;
-typedef __kernel_mode_t mode_t;
-typedef __kernel_nlink_t nlink_t;
-typedef __kernel_off_t off_t;
-typedef __kernel_pid_t pid_t;
-typedef __kernel_daddr_t daddr_t;
-typedef __kernel_key_t key_t;
-typedef __kernel_suseconds_t suseconds_t;
-
-#ifdef __KERNEL__
-typedef __kernel_uid32_t uid_t;
-typedef __kernel_gid32_t gid_t;
-typedef __kernel_uid16_t uid16_t;
-typedef __kernel_gid16_t gid16_t;
-
-#ifdef CONFIG_UID16
-/* This is defined by include/asm-{arch}/posix_types.h */
-typedef __kernel_old_uid_t old_uid_t;
-typedef __kernel_old_gid_t old_gid_t;
-#endif /* CONFIG_UID16 */
-
-/* libc5 includes this file to define uid_t, thus uid_t can never change
- * when it is included by non-kernel code
- */
-#else
-typedef __kernel_uid_t uid_t;
-typedef __kernel_gid_t gid_t;
-#endif /* __KERNEL__ */
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __kernel_loff_t loff_t;
-#endif
-
-/*
- * The following typedefs are also protected by individual ifdefs for
- * historical reasons:
- */
-#ifndef _SIZE_T
-#define _SIZE_T
-typedef __kernel_size_t size_t;
-#endif
-
-#ifndef _SSIZE_T
-#define _SSIZE_T
-typedef __kernel_ssize_t ssize_t;
-#endif
-
-#ifndef _PTRDIFF_T
-#define _PTRDIFF_T
-typedef __kernel_ptrdiff_t ptrdiff_t;
-#endif
-
-#ifndef _TIME_T
-#define _TIME_T
-typedef __kernel_time_t time_t;
-#endif
-
-#ifndef _CLOCK_T
-#define _CLOCK_T
-typedef __kernel_clock_t clock_t;
-#endif
-
-#ifndef _CADDR_T
-#define _CADDR_T
-typedef __kernel_caddr_t caddr_t;
-#endif
-
-/* bsd */
-typedef unsigned char u_char;
-typedef unsigned short u_short;
-typedef unsigned int u_int;
-typedef unsigned long u_long;
-
-/* sysv */
-typedef unsigned char unchar;
-typedef unsigned short ushort;
-typedef unsigned int uint;
-typedef unsigned long ulong;
-
-#ifndef __BIT_TYPES_DEFINED__
-#define __BIT_TYPES_DEFINED__
-
-typedef __u8 u_int8_t;
-typedef __s8 int8_t;
-typedef __u16 u_int16_t;
-typedef __s16 int16_t;
-typedef __u32 u_int32_t;
-typedef __s32 int32_t;
-
-#endif /* !(__BIT_TYPES_DEFINED__) */
-
-typedef __u8 uint8_t;
-typedef __u16 uint16_t;
-typedef __u32 uint32_t;
-
-#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
-typedef __u64 uint64_t;
-typedef __u64 u_int64_t;
-typedef __s64 int64_t;
-#endif
-
-#endif /* __KERNEL_STRICT_NAMES */
-
-/*
- * Below are truly Linux-specific types that should never collide with
- * any application/library that wants linux/types.h.
- */
-
-struct ustat {
- __kernel_daddr_t f_tfree;
- __kernel_ino_t f_tinode;
- char f_fname[6];
- char f_fpack[6];
-};
-
-#endif /* _LINUX_TYPES_H */
diff --git a/uart-monitor/include/malloc.h b/uart-monitor/include/malloc.h
deleted file mode 120000
index 9e84013..0000000
--- a/uart-monitor/include/malloc.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/malloc.h \ No newline at end of file
diff --git a/uart-monitor/include/mmc.h b/uart-monitor/include/mmc.h
deleted file mode 120000
index 1e59fb9..0000000
--- a/uart-monitor/include/mmc.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/mmc.h \ No newline at end of file
diff --git a/uart-monitor/include/ns16550.h b/uart-monitor/include/ns16550.h
deleted file mode 100644
index 36d2d40..0000000
--- a/uart-monitor/include/ns16550.h
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
- *This file is licensed under
- * the terms of the GNU General Public License version 2. This program
- * is licensed "as is" without any warranty of any kind, whether express
- * or implied.
- *
- * NS16550 Serial Port
- * originally from linux source (arch/ppc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CFG_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- */
-
-#if (CFG_NS16550_REG_SIZE == 1)
-struct NS16550 {
- unsigned char rbr; /* 0 */
- unsigned char ier; /* 1 */
- unsigned char fcr; /* 2 */
- unsigned char lcr; /* 3 */
- unsigned char mcr; /* 4 */
- unsigned char lsr; /* 5 */
- unsigned char msr; /* 6 */
- unsigned char scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 2)
-struct NS16550 {
- unsigned short rbr; /* 0 */
- unsigned short ier; /* 1 */
- unsigned short fcr; /* 2 */
- unsigned short lcr; /* 3 */
- unsigned short mcr; /* 4 */
- unsigned short lsr; /* 5 */
- unsigned short msr; /* 6 */
- unsigned short scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == 4)
-struct NS16550 {
- unsigned long rbr; /* 0 */
- unsigned long ier; /* 1 */
- unsigned long fcr; /* 2 */
- unsigned long lcr; /* 3 */
- unsigned long mcr; /* 4 */
- unsigned long lsr; /* 5 */
- unsigned long msr; /* 6 */
- unsigned long scr; /* 7 */
-} __attribute__ ((packed));
-#elif (CFG_NS16550_REG_SIZE == -4)
-struct NS16550 {
- unsigned char rbr; /* 0 */
- int pad1:24;
- unsigned char ier; /* 1 */
- int pad2:24;
- unsigned char fcr; /* 2 */
- int pad3:24;
- unsigned char lcr; /* 3 */
- int pad4:24;
- unsigned char mcr; /* 4 */
- int pad5:24;
- unsigned char lsr; /* 5 */
- int pad6:24;
- unsigned char msr; /* 6 */
- int pad7:24;
- unsigned char scr; /* 7 */
- int pad8:24;
-#if defined(CONFIG_OMAP)
- unsigned char mdr1; /* mode select reset TL16C750*/
-#endif
-#ifdef CONFIG_OMAP1510
- int pad9:24;
- unsigned long pad[10];
- unsigned char osc_12m_sel;
- int pad10:24;
-#endif
-} __attribute__ ((packed));
-#else
-#error "Please define NS16550 registers size."
-#endif
-
-#define thr rbr
-#define iir fcr
-#define dll rbr
-#define dlm ier
-
-typedef volatile struct NS16550 *NS16550_t;
-
-#define FCR_FIFO_EN 0x01 /* Fifo enable */
-#define FCR_RXSR 0x02 /* Receiver soft reset */
-#define FCR_TXSR 0x04 /* Transmitter soft reset */
-
-#define MCR_DTR 0x01
-#define MCR_RTS 0x02
-#define MCR_DMA_EN 0x04
-#define MCR_TX_DFR 0x08
-
-#define LCR_WLS_MSK 0x03 /* character length slect mask */
-#define LCR_WLS_5 0x00 /* 5 bit character length */
-#define LCR_WLS_6 0x01 /* 6 bit character length */
-#define LCR_WLS_7 0x02 /* 7 bit character length */
-#define LCR_WLS_8 0x03 /* 8 bit character length */
-#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN 0x08 /* Parity eneble */
-#define LCR_EPS 0x10 /* Even Parity Select */
-#define LCR_STKP 0x20 /* Stick Parity */
-#define LCR_SBRK 0x40 /* Set Break */
-#define LCR_BKSE 0x80 /* Bank select enable */
-
-#define LSR_DR 0x01 /* Data ready */
-#define LSR_OE 0x02 /* Overrun */
-#define LSR_PE 0x04 /* Parity error */
-#define LSR_FE 0x08 /* Framing error */
-#define LSR_BI 0x10 /* Break */
-#define LSR_THRE 0x20 /* Xmit holding register empty */
-#define LSR_TEMT 0x40 /* Xmitter empty */
-#define LSR_ERR 0x80 /* Error */
-
-#ifdef CONFIG_OMAP1510
-#define OSC_12M_SEL 0x01 /* selects 6.5 * current clk div */
-#endif
-
-/* useful defaults for LCR */
-#define LCR_8N1 0x03
-
-void NS16550_init (NS16550_t com_port, int baud_divisor);
-void NS16550_putc (NS16550_t com_port, char c);
-char NS16550_getc (NS16550_t com_port);
-int NS16550_tstc (NS16550_t com_port);
-void NS16550_reinit (NS16550_t com_port, int baud_divisor);
diff --git a/uart-monitor/include/part.h b/uart-monitor/include/part.h
deleted file mode 120000
index 766e417..0000000
--- a/uart-monitor/include/part.h
+++ /dev/null
@@ -1 +0,0 @@
-../../u-boot/include/part.h \ No newline at end of file
diff --git a/uart-monitor/lib/Makefile b/uart-monitor/lib/Makefile
deleted file mode 100644
index 341cd54..0000000
--- a/uart-monitor/lib/Makefile
+++ /dev/null
@@ -1,46 +0,0 @@
-#
-# (C) Copyright 2004 Texas Instruments
-#
-# (C) Copyright 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = lib$(ARCH).a
-
-AOBJS = _udivsi3.o _umodsi3.o
-
-COBJS = board.o ecc_256.o ecc_512.o printf.o div0.o
-
-OBJS = $(AOBJS) $(COBJS)
-
-$(LIB): .depend $(OBJS)
- $(AR) crv $@ $(OBJS)
-
-#########################################################################
-
-.depend: Makefile $(AOBJS:.o=.S) $(COBJS:.o=.c)
- $(CC) -M $(CFLAGS) $(AOBJS:.o=.S) $(COBJS:.o=.c) > $@
-
-sinclude .depend
-
-#########################################################################
diff --git a/uart-monitor/lib/_udivsi3.S b/uart-monitor/lib/_udivsi3.S
deleted file mode 100644
index 2cdcd48..0000000
--- a/uart-monitor/lib/_udivsi3.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-dividend .req r0
-divisor .req r1
-result .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .globl __udivsi3
- .type __udivsi3 ,function
- .align 0
- __udivsi3 :
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- mov result, #0
- cmp dividend, divisor
- bcc Lgot_result
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions, and note which bits
- @ are done in the result. On the final pass, this may subtract
- @ too much from the dividend, but the result will be ok, since the
- @ "bit" will have been shifted out at the bottom.
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- orrcs result, result, curbit
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs result, result, curbit, lsr #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs result, result, curbit, lsr #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs result, result, curbit, lsr #3
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
-Lgot_result:
- mov r0, result
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __udivsi3 , . - __udivsi3
-/* # 235 "libgcc1.S" */
-/* # 320 "libgcc1.S" */
-/* # 421 "libgcc1.S" */
-/* # 433 "libgcc1.S" */
-/* # 456 "libgcc1.S" */
-/* # 500 "libgcc1.S" */
-/* # 580 "libgcc1.S" */
diff --git a/uart-monitor/lib/_umodsi3.S b/uart-monitor/lib/_umodsi3.S
deleted file mode 100644
index e4aebe8..0000000
--- a/uart-monitor/lib/_umodsi3.S
+++ /dev/null
@@ -1,88 +0,0 @@
-/* # 1 "libgcc1.S" */
-@ libgcc1 routines for ARM cpu.
-@ Division routines, written by Richard Earnshaw, (rearnsha@armltd.co.uk)
-/* # 145 "libgcc1.S" */
-dividend .req r0
-divisor .req r1
-overdone .req r2
-curbit .req r3
-/* ip .req r12 */
-/* sp .req r13 */
-/* lr .req r14 */
-/* pc .req r15 */
- .text
- .globl __umodsi3
- .type __umodsi3 ,function
- .align 0
- __umodsi3 :
- cmp divisor, #0
- beq Ldiv0
- mov curbit, #1
- cmp dividend, divisor
- movcc pc, lr
-Loop1:
- @ Unless the divisor is very big, shift it up in multiples of
- @ four bits, since this is the amount of unwinding in the main
- @ division loop. Continue shifting until the divisor is
- @ larger than the dividend.
- cmp divisor, #0x10000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #4
- movcc curbit, curbit, lsl #4
- bcc Loop1
-Lbignum:
- @ For very big divisors, we must shift it a bit at a time, or
- @ we will be in danger of overflowing.
- cmp divisor, #0x80000000
- cmpcc divisor, dividend
- movcc divisor, divisor, lsl #1
- movcc curbit, curbit, lsl #1
- bcc Lbignum
-Loop3:
- @ Test for possible subtractions. On the final pass, this may
- @ subtract too much from the dividend, so keep track of which
- @ subtractions are done, we can fix them up afterwards...
- mov overdone, #0
- cmp dividend, divisor
- subcs dividend, dividend, divisor
- cmp dividend, divisor, lsr #1
- subcs dividend, dividend, divisor, lsr #1
- orrcs overdone, overdone, curbit, ror #1
- cmp dividend, divisor, lsr #2
- subcs dividend, dividend, divisor, lsr #2
- orrcs overdone, overdone, curbit, ror #2
- cmp dividend, divisor, lsr #3
- subcs dividend, dividend, divisor, lsr #3
- orrcs overdone, overdone, curbit, ror #3
- mov ip, curbit
- cmp dividend, #0 @ Early termination?
- movnes curbit, curbit, lsr #4 @ No, any more bits to do?
- movne divisor, divisor, lsr #4
- bne Loop3
- @ Any subtractions that we should not have done will be recorded in
- @ the top three bits of "overdone". Exactly which were not needed
- @ are governed by the position of the bit, stored in ip.
- @ If we terminated early, because dividend became zero,
- @ then none of the below will match, since the bit in ip will not be
- @ in the bottom nibble.
- ands overdone, overdone, #0xe0000000
- moveq pc, lr @ No fixups needed
- tst overdone, ip, ror #3
- addne dividend, dividend, divisor, lsr #3
- tst overdone, ip, ror #2
- addne dividend, dividend, divisor, lsr #2
- tst overdone, ip, ror #1
- addne dividend, dividend, divisor, lsr #1
- mov pc, lr
-Ldiv0:
- str lr, [sp, #-4]!
- bl __div0 (PLT)
- mov r0, #0 @ about as wrong as it could be
- ldmia sp!, {pc}
- .size __umodsi3 , . - __umodsi3
-/* # 320 "libgcc1.S" */
-/* # 421 "libgcc1.S" */
-/* # 433 "libgcc1.S" */
-/* # 456 "libgcc1.S" */
-/* # 500 "libgcc1.S" */
-/* # 580 "libgcc1.S" */
diff --git a/uart-monitor/lib/board.c b/uart-monitor/lib/board.c
deleted file mode 100644
index 9d3e7f9..0000000
--- a/uart-monitor/lib/board.c
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * Copyright (C) 2005 Texas Instruments.
- *
- * (C) Copyright 2004
- * Jian Zhang, Texas Instruments, jzhang@ti.com.
- *
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <part.h>
-#include <fat.h>
-#include <mmc.h>
-
-#ifdef CFG_PRINTF
-int print_info(void)
-{
- printf ("\n\nTexas Instruments X-Loader 1.41 ("
- __DATE__ " - " __TIME__ ")\n");
- return 0;
-}
-#endif
-typedef int (init_fnc_t) (void);
-
-init_fnc_t *init_sequence[] = {
- cpu_init, /* basic cpu dependent setup */
- board_init, /* basic board dependent setup */
-#ifdef CFG_PRINTF
- serial_init, /* serial communications setup */
- print_info,
-#endif
- nand_init, /* board specific nand init */
- NULL,
-};
-
-#ifdef CFG_CMD_FAT
-extern char * strcpy(char * dest,const char *src);
-#else
-char * strcpy(char * dest,const char *src)
-{
- char *tmp = dest;
-
- while ((*dest++ = *src++) != '\0')
- /* nothing */;
- return tmp;
-}
-#endif
-
-#ifdef CONFIG_MMC
-int mmc_read_bootloader(int dev, int part)
-{
- long size;
- unsigned long offset = CFG_LOADADDR;
- block_dev_desc_t *dev_desc = NULL;
- unsigned char ret = 0;
-
- ret = mmc_init(dev);
- if (ret != 0){
- printf("\n MMC init failed \n");
- return -1;
- }
-
- if (part) { /* FAT Read for extenal SD card */
- dev_desc = mmc_get_dev(dev);
- size = file_fat_read("u-boot.bin", (unsigned char *)offset, 0);
- if (size == -1)
- return -1;
- } else { /* RAW read for EMMC */
- ret = mmc_read(dev, 0x400, (unsigned char *)offset, 0x60000);
- if (ret != 1)
- return -1;
- }
-
- return 0;
-}
-#endif
-
-extern int do_load_serial_bin(ulong offset, int baudrate);
-
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-void start_armboot (void)
-{
- init_fnc_t **init_fnc_ptr;
- int i;
- uchar *buf;
- char boot_dev_name[8];
- u32 boot_device = 0;
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- if ((*init_fnc_ptr)() != 0) {
- hang ();
- }
- }
-#ifdef START_LOADB_DOWNLOAD
- strcpy(boot_dev_name, "UART");
- do_load_serial_bin (CFG_LOADADDR, 115200);
-#else
- /* Read boot device from saved scratch pad */
- boot_device = __raw_readl(0x480029c0) & 0xff;
- buf = (uchar*) CFG_LOADADDR;
-
- switch(boot_device) {
- case 0x03:
- strcpy(boot_dev_name, "ONENAND");
-#if defined(CFG_ONENAND)
- for (i = ONENAND_START_BLOCK; i < ONENAND_END_BLOCK; i++) {
- if (!onenand_read_block(buf, i))
- buf += ONENAND_BLOCK_SIZE;
- else
- goto error;
- }
-#endif
- break;
- case 0x02:
- default:
- strcpy(boot_dev_name, "NAND");
-#if defined(CFG_NAND)
- for (i = NAND_UBOOT_START; i < NAND_UBOOT_END;
- i+= NAND_BLOCK_SIZE) {
- if (!nand_read_block(buf, i))
- buf += NAND_BLOCK_SIZE; /* advance buf ptr */
- }
-#endif
- break;
- case 0x05:
- strcpy(boot_dev_name, "EMMC");
-#if defined(CONFIG_MMC)
- if (mmc_read_bootloader(1, 0) != 0)
- goto error;
-#else
- goto error;
-#endif
- break;
- case 0x06:
- strcpy(boot_dev_name, "MMC/SD1");
-#if defined(CONFIG_MMC) && defined(CFG_CMD_FAT)
- if (mmc_read_bootloader(0, 1) != 0)
- goto error;
-#else
- goto error;
-#endif
- break;
- };
-#endif
- /* go run U-Boot and never return */
- printf("Starting OS Bootloader from %s ...\n", boot_dev_name);
- ((init_fnc_t *)CFG_LOADADDR)();
-
- /* should never come here */
-#if defined(CFG_ONENAND) || defined(CONFIG_MMC)
-error:
-#endif
- printf("Could not read bootloader!\n");
- hang();
-}
-
-void hang (void)
-{
- /* call board specific hang function */
- board_hang();
-
- /* if board_hang() returns, hange here */
- printf("X-Loader hangs\n");
- for (;;);
-}
diff --git a/uart-monitor/lib/div0.c b/uart-monitor/lib/div0.c
deleted file mode 100644
index 6267bf1..0000000
--- a/uart-monitor/lib/div0.c
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* Replacement (=dummy) for GNU/Linux division-by zero handler */
-void __div0 (void)
-{
- extern void hang (void);
-
- hang();
-}
diff --git a/uart-monitor/lib/ecc_256.c b/uart-monitor/lib/ecc_256.c
deleted file mode 100644
index 92c310f..0000000
--- a/uart-monitor/lib/ecc_256.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * (C) Copyright 2000 Texas Instruments
- *
- * This file os based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#ifndef CFG_SW_ECC_512
-
-/*
- * Pre-calculated 256-way 1 byte column parity
- */
-static const u_char nand_ecc_precalc_table[] = {
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x6a, 0x3f, 0x3c, 0x69, 0x33, 0x66, 0x65, 0x30, 0x30, 0x65, 0x66, 0x33, 0x69, 0x3c, 0x3f, 0x6a,
- 0x0f, 0x5a, 0x59, 0x0c, 0x56, 0x03, 0x00, 0x55, 0x55, 0x00, 0x03, 0x56, 0x0c, 0x59, 0x5a, 0x0f,
- 0x0c, 0x59, 0x5a, 0x0f, 0x55, 0x00, 0x03, 0x56, 0x56, 0x03, 0x00, 0x55, 0x0f, 0x5a, 0x59, 0x0c,
- 0x69, 0x3c, 0x3f, 0x6a, 0x30, 0x65, 0x66, 0x33, 0x33, 0x66, 0x65, 0x30, 0x6a, 0x3f, 0x3c, 0x69,
- 0x03, 0x56, 0x55, 0x00, 0x5a, 0x0f, 0x0c, 0x59, 0x59, 0x0c, 0x0f, 0x5a, 0x00, 0x55, 0x56, 0x03,
- 0x66, 0x33, 0x30, 0x65, 0x3f, 0x6a, 0x69, 0x3c, 0x3c, 0x69, 0x6a, 0x3f, 0x65, 0x30, 0x33, 0x66,
- 0x65, 0x30, 0x33, 0x66, 0x3c, 0x69, 0x6a, 0x3f, 0x3f, 0x6a, 0x69, 0x3c, 0x66, 0x33, 0x30, 0x65,
- 0x00, 0x55, 0x56, 0x03, 0x59, 0x0c, 0x0f, 0x5a, 0x5a, 0x0f, 0x0c, 0x59, 0x03, 0x56, 0x55, 0x00
-};
-
-
-#ifdef NAND_LEGACY
-/*
- * Creates non-inverted ECC code from line parity
- */
-static void nand_trans_result(u_char reg2, u_char reg3,
- u_char *ecc_code)
-{
- u_char a, b, i, tmp1, tmp2;
-
- /* Initialize variables */
- a = b = 0x80;
- tmp1 = tmp2 = 0;
-
- /* Calculate first ECC byte */
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP15,13,11,9 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- if (reg2 & a) /* LP14,12,10,8 --> ecc_code[0] */
- tmp1 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Calculate second ECC byte */
- b = 0x80;
- for (i = 0; i < 4; i++) {
- if (reg3 & a) /* LP7,5,3,1 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- if (reg2 & a) /* LP6,4,2,0 --> ecc_code[1] */
- tmp2 |= b;
- b >>= 1;
- a >>= 1;
- }
-
- /* Store two of the ECC bytes */
- ecc_code[0] = tmp1;
- ecc_code[1] = tmp2;
-}
-
-/*
- * Calculate 3 byte ECC code for 256 byte block
- */
-/* ECC Calculation is different between NAND and NAND Legacy code
- * in U-Boot. If NAND_LEGACY is enabled in u-boot it should be
- * enabled in the config file in x-loader also
- */
-void nand_calculate_ecc (const u_char *dat, u_char *ecc_code)
-{
- u_char idx, reg1, reg3;
- int j;
-
- /* Initialize variables */
- reg1 = reg3 = 0;
- ecc_code[0] = ecc_code[1] = ecc_code[2] = 0;
-
- /* Build up column parity */
- for(j = 0; j < 256; j++) {
-
- /* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[dat[j]];
- reg1 ^= idx;
-
- /* All bit XOR = 1 ? */
- if (idx & 0x40) {
- reg3 ^= (u_char) j;
-
- }
- }
-
- /* Create non-inverted ECC code from line parity */
- nand_trans_result((reg1 & 0x40) ? ~reg3 : reg3, reg3, ecc_code);
-
- /* Calculate final ECC code */
- ecc_code[0] = ~ecc_code[0];
- ecc_code[1] = ~ecc_code[1];
- ecc_code[2] = ((~reg1) << 2) | 0x03;
-}
-
-/*
- * Detect and correct a 1 bit error for 256 byte block
- */
-int nand_correct_data (u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-{
- u_char a, b, c, d1, d2, d3, add, bit, i;
-
- /* Do error detection */
- d1 = calc_ecc[0] ^ read_ecc[0];
- d2 = calc_ecc[1] ^ read_ecc[1];
- d3 = calc_ecc[2] ^ read_ecc[2];
-
- if ((d1 | d2 | d3) == 0) {
- /* No errors */
- return 0;
- }
- else {
- a = (d1 ^ (d1 >> 1)) & 0x55;
- b = (d2 ^ (d2 >> 1)) & 0x55;
- c = (d3 ^ (d3 >> 1)) & 0x54;
-
- /* Found and will correct single bit error in the data */
- if ((a == 0x55) && (b == 0x55) && (c == 0x54)) {
- c = 0x80;
- add = 0;
- a = 0x80;
- for (i=0; i<4; i++) {
- if (d1 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- c = 0x80;
- for (i=0; i<4; i++) {
- if (d2 & c)
- add |= a;
- c >>= 2;
- a >>= 1;
- }
- bit = 0;
- b = 0x04;
- c = 0x80;
- for (i=0; i<3; i++) {
- if (d3 & c)
- bit |= b;
- c >>= 2;
- b >>= 1;
- }
- b = 0x01;
- a = dat[add];
- a ^= (b << bit);
- dat[add] = a;
- return 1;
- }
- else {
- i = 0;
- while (d1) {
- if (d1 & 0x01)
- ++i;
- d1 >>= 1;
- }
- while (d2) {
- if (d2 & 0x01)
- ++i;
- d2 >>= 1;
- }
- while (d3) {
- if (d3 & 0x01)
- ++i;
- d3 >>= 1;
- }
- if (i == 1) {
- /* ECC Code Error Correction */
- read_ecc[0] = calc_ecc[0];
- read_ecc[1] = calc_ecc[1];
- read_ecc[2] = calc_ecc[2];
- return 2;
- }
- else {
- /* Uncorrectable Error */
- return -1;
- }
- }
- }
-
- /* Should never happen */
- return -1;
-}
-#else /* not NAND_LEGACY */
-void nand_calculate_ecc(const u_char *dat, u_char *ecc_code)
-{
- uint8_t idx, reg1, reg2, reg3, tmp1, tmp2;
- int i;
-
- /* Initialize variables */
- reg1 = reg2 = reg3 = 0;
-
- /* Build up column parity */
- for(i = 0; i < 256; i++) {
- /* Get CP0 - CP5 from table */
- idx = nand_ecc_precalc_table[*dat++];
- reg1 ^= (idx & 0x3f);
-
- /* All bit XOR = 1 ? */
- if (idx & 0x40) {
- reg3 ^= (uint8_t) i;
- reg2 ^= ~((uint8_t) i);
- }
- }
-
- /* Create non-inverted ECC code from line parity */
- tmp1 = (reg3 & 0x80) >> 0; /* B7 -> B7 */
- tmp1 |= (reg2 & 0x80) >> 1; /* B7 -> B6 */
- tmp1 |= (reg3 & 0x40) >> 1; /* B6 -> B5 */
- tmp1 |= (reg2 & 0x40) >> 2; /* B6 -> B4 */
- tmp1 |= (reg3 & 0x20) >> 2; /* B5 -> B3 */
- tmp1 |= (reg2 & 0x20) >> 3; /* B5 -> B2 */
- tmp1 |= (reg3 & 0x10) >> 3; /* B4 -> B1 */
- tmp1 |= (reg2 & 0x10) >> 4; /* B4 -> B0 */
-
- tmp2 = (reg3 & 0x08) << 4; /* B3 -> B7 */
- tmp2 |= (reg2 & 0x08) << 3; /* B3 -> B6 */
- tmp2 |= (reg3 & 0x04) << 3; /* B2 -> B5 */
- tmp2 |= (reg2 & 0x04) << 2; /* B2 -> B4 */
- tmp2 |= (reg3 & 0x02) << 2; /* B1 -> B3 */
- tmp2 |= (reg2 & 0x02) << 1; /* B1 -> B2 */
- tmp2 |= (reg3 & 0x01) << 1; /* B0 -> B1 */
- tmp2 |= (reg2 & 0x01) << 0; /* B7 -> B0 */
-
- /* Calculate final ECC code */
- ecc_code[0] = ~tmp1;
- ecc_code[1] = ~tmp2;
- ecc_code[2] = ((~reg1) << 2) | 0x03;
-}
-
-static inline int countbits(uint32_t byte)
-{
- int res = 0;
-
- for (;byte; byte >>= 1)
- res += byte & 0x01;
- return res;
-}
-
-/*
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
- * @dat: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
- *
- * Detect and correct a 1 bit error for 256 byte block
- */
-int nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc)
-{
- uint8_t s0, s1, s2;
-
- s0 = calc_ecc[0] ^ read_ecc[0];
- s1 = calc_ecc[1] ^ read_ecc[1];
- s2 = calc_ecc[2] ^ read_ecc[2];
-
- if ((s0 | s1 | s2) == 0)
- return 0;
-
-/* Check for a single bit error */
- if( ((s0 ^ (s0 >> 1)) & 0x55) == 0x55 &&
- ((s1 ^ (s1 >> 1)) & 0x55) == 0x55 &&
- ((s2 ^ (s2 >> 1)) & 0x54) == 0x54) {
-
- uint32_t byteoffs, bitnum;
-
- byteoffs = (s1 << 0) & 0x80;
- byteoffs |= (s1 << 1) & 0x40;
- byteoffs |= (s1 << 2) & 0x20;
- byteoffs |= (s1 << 3) & 0x10;
-
- byteoffs |= (s0 >> 4) & 0x08;
- byteoffs |= (s0 >> 3) & 0x04;
- byteoffs |= (s0 >> 2) & 0x02;
- byteoffs |= (s0 >> 1) & 0x01;
-
- bitnum = (s2 >> 5) & 0x04;
- bitnum |= (s2 >> 4) & 0x02;
- bitnum |= (s2 >> 3) & 0x01;
-
- dat[byteoffs] ^= (1 << bitnum);
-
- return 1;
- }
-
- if(countbits(s0 | ((uint32_t)s1 << 8) | ((uint32_t)s2 <<16)) == 1)
- return 1;
-
- return -1;
-}
-#endif /* NAND_LEGACY */
-#endif /* ! CFG_SW_ECC_512 */
diff --git a/uart-monitor/lib/ecc_512.c b/uart-monitor/lib/ecc_512.c
deleted file mode 100644
index 29647c6..0000000
--- a/uart-monitor/lib/ecc_512.c
+++ /dev/null
@@ -1,420 +0,0 @@
-/*
- * (C) Copyright 2000 Texas Instruments
- *
- * This file os based on the following u-boot file:
- * common/cmd_nand.c
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-
-#ifdef CFG_SW_ECC_512
-
-/*
- * invparity is a 256 byte table that contains the odd parity
- * for each byte. So if the number of bits in a byte is even,
- * the array element is 1, and when the number of bits is odd
- * the array eleemnt is 0.
- */
-static const char invparity[256] = {
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
- 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
-};
-
-/*
- * bitsperbyte contains the number of bits per byte
- * this is only used for testing and repairing parity
- * (a precalculated value slightly improves performance)
- */
-static const char bitsperbyte[256] = {
- 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
- 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
-};
-
-/*
- * addressbits is a lookup table to filter out the bits from the xor-ed
- * ecc data that identify the faulty location.
- * this is only used for repairing parity
- * see the comments in nand_correct_data for more details
- */
-static const char addressbits[256] = {
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
- 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
- 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
- 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
- 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
- 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
-};
-
-/*
- * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
- * block
- * @mtd: MTD block structure
- * @buf: input buffer with raw data
- * @code: output buffer with ECC
- */
-void nand_calculate_ecc(const u_char *buf, u_char *code)
-{
- int i;
- const uint32_t *bp = (uint32_t *)buf;
- /* 256 or 512 bytes/ecc */
- int eccsize = 512;
- const uint32_t eccsize_mult = eccsize >> 8;
- uint32_t cur; /* current value in buffer */
- /* rp0..rp15..rp17 are the various accumulated parities (per byte) */
- uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
- uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
- uint32_t rp17 = 0;
- uint32_t par; /* the cumulative parity for all data */
- uint32_t tmppar; /* the cumulative parity for this iteration;
- for rp12, rp14 and rp16 at the end of the
- loop */
- par = 0;
- rp4 = 0;
- rp6 = 0;
- rp8 = 0;
- rp10 = 0;
- rp12 = 0;
- rp14 = 0;
- rp16 = 0;
-
- /*
- * The loop is unrolled a number of times;
- * This avoids if statements to decide on which rp value to update
- * Also we process the data by longwords.
- * Note: passing unaligned data might give a performance penalty.
- * It is assumed that the buffers are aligned.
- * tmppar is the cumulative sum of this iteration.
- * needed for calculating rp12, rp14, rp16 and par
- * also used as a performance improvement for rp6, rp8 and rp10
- */
- for (i = 0; i < eccsize_mult << 2; i++) {
- cur = *bp++;
- tmppar = cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= tmppar;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp8 ^= tmppar;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp10 ^= tmppar;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp8 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp8 ^= cur;
-
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp6 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
- rp4 ^= cur;
- cur = *bp++;
- tmppar ^= cur;
-
- par ^= tmppar;
- if ((i & 0x1) == 0)
- rp12 ^= tmppar;
- if ((i & 0x2) == 0)
- rp14 ^= tmppar;
- if (eccsize_mult == 2 && (i & 0x4) == 0)
- rp16 ^= tmppar;
- }
-
- /*
- * handle the fact that we use longword operations
- * we'll bring rp4..rp14..rp16 back to single byte entities by
- * shifting and xoring first fold the upper and lower 16 bits,
- * then the upper and lower 8 bits.
- */
- rp4 ^= (rp4 >> 16);
- rp4 ^= (rp4 >> 8);
- rp4 &= 0xff;
- rp6 ^= (rp6 >> 16);
- rp6 ^= (rp6 >> 8);
- rp6 &= 0xff;
- rp8 ^= (rp8 >> 16);
- rp8 ^= (rp8 >> 8);
- rp8 &= 0xff;
- rp10 ^= (rp10 >> 16);
- rp10 ^= (rp10 >> 8);
- rp10 &= 0xff;
- rp12 ^= (rp12 >> 16);
- rp12 ^= (rp12 >> 8);
- rp12 &= 0xff;
- rp14 ^= (rp14 >> 16);
- rp14 ^= (rp14 >> 8);
- rp14 &= 0xff;
- if (eccsize_mult == 2) {
- rp16 ^= (rp16 >> 16);
- rp16 ^= (rp16 >> 8);
- rp16 &= 0xff;
- }
-
- /*
- * we also need to calculate the row parity for rp0..rp3
- * This is present in par, because par is now
- * rp3 rp3 rp2 rp2 in little endian and
- * rp2 rp2 rp3 rp3 in big endian
- * as well as
- * rp1 rp0 rp1 rp0 in little endian and
- * rp0 rp1 rp0 rp1 in big endian
- * First calculate rp2 and rp3
- */
- rp3 = (par >> 16);
- rp3 ^= (rp3 >> 8);
- rp3 &= 0xff;
- rp2 = par & 0xffff;
- rp2 ^= (rp2 >> 8);
- rp2 &= 0xff;
-
- /* reduce par to 16 bits then calculate rp1 and rp0 */
- par ^= (par >> 16);
- rp1 = (par >> 8) & 0xff;
- rp0 = (par & 0xff);
-
- /* finally reduce par to 8 bits */
- par ^= (par >> 8);
- par &= 0xff;
-
- /*
- * and calculate rp5..rp15..rp17
- * note that par = rp4 ^ rp5 and due to the commutative property
- * of the ^ operator we can say:
- * rp5 = (par ^ rp4);
- * The & 0xff seems superfluous, but benchmarking learned that
- * leaving it out gives slightly worse results. No idea why, probably
- * it has to do with the way the pipeline in pentium is organized.
- */
- rp5 = (par ^ rp4) & 0xff;
- rp7 = (par ^ rp6) & 0xff;
- rp9 = (par ^ rp8) & 0xff;
- rp11 = (par ^ rp10) & 0xff;
- rp13 = (par ^ rp12) & 0xff;
- rp15 = (par ^ rp14) & 0xff;
- if (eccsize_mult == 2)
- rp17 = (par ^ rp16) & 0xff;
-
- /*
- * Finally calculate the ecc bits.
- * Again here it might seem that there are performance optimisations
- * possible, but benchmarks showed that on the system this is developed
- * the code below is the fastest
- */
- code[1] =
- (invparity[rp7] << 7) |
- (invparity[rp6] << 6) |
- (invparity[rp5] << 5) |
- (invparity[rp4] << 4) |
- (invparity[rp3] << 3) |
- (invparity[rp2] << 2) |
- (invparity[rp1] << 1) |
- (invparity[rp0]);
- code[0] =
- (invparity[rp15] << 7) |
- (invparity[rp14] << 6) |
- (invparity[rp13] << 5) |
- (invparity[rp12] << 4) |
- (invparity[rp11] << 3) |
- (invparity[rp10] << 2) |
- (invparity[rp9] << 1) |
- (invparity[rp8]);
- if (eccsize_mult == 1)
- code[2] =
- (invparity[par & 0xf0] << 7) |
- (invparity[par & 0x0f] << 6) |
- (invparity[par & 0xcc] << 5) |
- (invparity[par & 0x33] << 4) |
- (invparity[par & 0xaa] << 3) |
- (invparity[par & 0x55] << 2) |
- 3;
- else
- code[2] =
- (invparity[par & 0xf0] << 7) |
- (invparity[par & 0x0f] << 6) |
- (invparity[par & 0xcc] << 5) |
- (invparity[par & 0x33] << 4) |
- (invparity[par & 0xaa] << 3) |
- (invparity[par & 0x55] << 2) |
- (invparity[rp17] << 1) |
- (invparity[rp16] << 0);
-}
-
-/**
- * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
- * @mtd: MTD block structure
- * @buf: raw data read from the chip
- * @read_ecc: ECC from the chip
- * @calc_ecc: the ECC calculated from raw data
- *
- * Detect and correct a 1 bit error for 256/512 byte block
- */
-int nand_correct_data(unsigned char *buf,
- unsigned char *read_ecc, unsigned char *calc_ecc)
-{
- unsigned char b0, b1, b2;
- uint32_t byte_addr;
- unsigned char bit_addr;
- /* 256 or 512 bytes/ecc */
- int eccsize = 512;
- const uint32_t eccsize_mult = eccsize >> 8;
- /*
- * b0 to b2 indicate which bit is faulty (if any)
- * we might need the xor result more than once,
- * so keep them in a local var
- */
- b0 = read_ecc[1] ^ calc_ecc[1];
- b1 = read_ecc[0] ^ calc_ecc[0];
- b2 = read_ecc[2] ^ calc_ecc[2];
-
- /* check if there are any bitfaults */
-
- /* repeated if statements are slightly more efficient than switch ... */
- /* ordered in order of likelihood */
-
- if ((b0 | b1 | b2) == 0)
- return 0; /* no error */
-
- if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) &&
- (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) &&
- ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) ||
- (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) {
- /* single bit error */
- /*
- * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty
- * byte, cp 5/3/1 indicate the faulty bit.
- * A lookup table (called addressbits) is used to filter
- * the bits from the byte they are in.
- * A marginal optimisation is possible by having three
- * different lookup tables.
- * One as we have now (for b0), one for b2
- * (that would avoid the >> 1), and one for b1 (with all values
- * << 4). However it was felt that introducing two more tables
- * hardly justify the gain.
- *
- * The b2 shift is there to get rid of the lowest two bits.
- * We could also do addressbits[b2] >> 1 but for the
- * performace it does not make any difference
- */
- if (eccsize_mult == 1)
- byte_addr = (addressbits[b1] << 4) + addressbits[b0];
- else
- byte_addr = (addressbits[b2 & 0x3] << 8) +
- (addressbits[b1] << 4) + addressbits[b0];
- bit_addr = addressbits[b2 >> 2];
- /* flip the bit */
- buf[byte_addr] ^= (1 << bit_addr);
- return 1;
-
- }
- /* count nr of bits; use table lookup, faster than calculating it */
- if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
- return 1; /* error in ecc data; no action needed */
-
- return -1;
-}
-#endif /* CFG_SW_ECC_512 */
diff --git a/uart-monitor/lib/printf.c b/uart-monitor/lib/printf.c
deleted file mode 100644
index 91d22fc..0000000
--- a/uart-monitor/lib/printf.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * (C) Copyright 2004 Texas Instruments
- *
- * Based on the following file:
- * linux/lib/vsprintf.c
- *
- * Copyright (C) 1991, 1992 Linus Torvalds
- */
-
-/* vsprintf.c -- Lars Wirzenius & Linus Torvalds. */
-/*
- * Wirzenius wrote this portably, Torvalds fucked it up :-)
- */
-
-#include <stdarg.h>
-#include <common.h>
-
-#ifdef CFG_PRINTF
-
-/* we use this so that we can do without the ctype library */
-#define is_digit(c) ((c) >= '0' && (c) <= '9')
-
-size_t strnlen(const char * s, size_t count)
-{
- const char *sc;
-
- for (sc = s; count-- && *sc != '\0'; ++sc)
- /* nothing */;
- return sc - s;
-}
-
-static int skip_atoi(const char **s)
-{
- int i=0;
-
- while (is_digit(**s))
- i = i*10 + *((*s)++) - '0';
- return i;
-}
-
-#define ZEROPAD 1 /* pad with zero */
-#define SIGN 2 /* unsigned/signed long */
-#define PLUS 4 /* show plus */
-#define SPACE 8 /* space if plus */
-#define LEFT 16 /* left justified */
-#define SPECIAL 32 /* 0x */
-#define LARGE 64 /* use 'ABCDEF' instead of 'abcdef' */
-
-#define do_div(n,base) ({ \
-int __res; \
-__res = ((unsigned long) n) % (unsigned) base; \
-n = ((unsigned long) n) / (unsigned) base; \
-__res; })
-
-static char * number(char * str, long num, int base, int size, int precision
- ,int type)
-{
- char c,sign,tmp[66];
- const char *digits="0123456789abcdefghijklmnopqrstuvwxyz";
- int i;
-
- if (type & LARGE)
- digits = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ";
- if (type & LEFT)
- type &= ~ZEROPAD;
- if (base < 2 || base > 36)
- return 0;
- c = (type & ZEROPAD) ? '0' : ' ';
- sign = 0;
- if (type & SIGN) {
- if (num < 0) {
- sign = '-';
- num = -num;
- size--;
- } else if (type & PLUS) {
- sign = '+';
- size--;
- } else if (type & SPACE) {
- sign = ' ';
- size--;
- }
- }
- if (type & SPECIAL) {
- if (base == 16)
- size -= 2;
- else if (base == 8)
- size--;
- }
- i = 0;
- if (num == 0)
- tmp[i++]='0';
- else while (num != 0)
- tmp[i++] = digits[do_div(num,base)];
- if (i > precision)
- precision = i;
- size -= precision;
- if (!(type&(ZEROPAD+LEFT)))
- while(size-->0)
- *str++ = ' ';
- if (sign)
- *str++ = sign;
- if (type & SPECIAL) {
- if (base==8)
- *str++ = '0';
- else if (base==16) {
- *str++ = '0';
- *str++ = digits[33];
- }
- }
- if (!(type & LEFT))
- while (size-- > 0)
- *str++ = c;
- while (i < precision--)
- *str++ = '0';
- while (i-- > 0)
- *str++ = tmp[i];
- while (size-- > 0)
- *str++ = ' ';
- return str;
-}
-
-
-static int vsprintf(char *buf, const char *fmt, va_list args)
-{
- int len;
- unsigned long num;
- int i, base;
- char * str;
- const char *s;
-
- int flags; /* flags to number() */
-
- int field_width; /* width of output field */
- int precision; /* min. # of digits for integers; max
- number of chars for from string */
- int qualifier; /* 'h', 'l', or 'L' for integer fields */
-
- for (str=buf ; *fmt ; ++fmt) {
- if (*fmt != '%') {
- *str++ = *fmt;
- continue;
- }
-
- /* process flags */
- flags = 0;
- repeat:
- ++fmt; /* this also skips first '%' */
- switch (*fmt) {
- case '-': flags |= LEFT; goto repeat;
- case '+': flags |= PLUS; goto repeat;
- case ' ': flags |= SPACE; goto repeat;
- case '#': flags |= SPECIAL; goto repeat;
- case '0': flags |= ZEROPAD; goto repeat;
- }
-
- /* get field width */
- field_width = -1;
- if (is_digit(*fmt))
- field_width = skip_atoi(&fmt);
- else if (*fmt == '*') {
- ++fmt;
- /* it's the next argument */
- field_width = va_arg(args, int);
- if (field_width < 0) {
- field_width = -field_width;
- flags |= LEFT;
- }
- }
-
- /* get the precision */
- precision = -1;
- if (*fmt == '.') {
- ++fmt;
- if (is_digit(*fmt))
- precision = skip_atoi(&fmt);
- else if (*fmt == '*') {
- ++fmt;
- /* it's the next argument */
- precision = va_arg(args, int);
- }
- if (precision < 0)
- precision = 0;
- }
-
- /* get the conversion qualifier */
- qualifier = -1;
- if (*fmt == 'h' || *fmt == 'l' || *fmt == 'L') {
- qualifier = *fmt;
- ++fmt;
- }
-
- /* default base */
- base = 10;
-
- switch (*fmt) {
- case 'c':
- if (!(flags & LEFT))
- while (--field_width > 0)
- *str++ = ' ';
- *str++ = (unsigned char) va_arg(args, int);
- while (--field_width > 0)
- *str++ = ' ';
- continue;
-
- case 's':
- s = va_arg(args, char *);
- if (!s)
- s = "<NULL>";
-
- len = strnlen(s, precision);
-
- if (!(flags & LEFT))
- while (len < field_width--)
- *str++ = ' ';
- for (i = 0; i < len; ++i)
- *str++ = *s++;
- while (len < field_width--)
- *str++ = ' ';
- continue;
-
- case 'p':
- if (field_width == -1) {
- field_width = 2*sizeof(void *);
- flags |= ZEROPAD;
- }
- str = number(str,
- (unsigned long) va_arg(args, void *), 16,
- field_width, precision, flags);
- continue;
-
-
- case 'n':
- if (qualifier == 'l') {
- long * ip = va_arg(args, long *);
- *ip = (str - buf);
- } else {
- int * ip = va_arg(args, int *);
- *ip = (str - buf);
- }
- continue;
-
- case '%':
- *str++ = '%';
- continue;
-
- /* integer number formats - set up the flags and "break" */
- case 'o':
- base = 8;
- break;
-
- case 'X':
- flags |= LARGE;
- case 'x':
- base = 16;
- break;
-
- case 'd':
- case 'i':
- flags |= SIGN;
- case 'u':
- break;
-
- default:
- *str++ = '%';
- if (*fmt)
- *str++ = *fmt;
- else
- --fmt;
- continue;
- }
- if (qualifier == 'l')
- num = va_arg(args, unsigned long);
- else if (qualifier == 'h') {
- num = (unsigned short) va_arg(args, int);
- if (flags & SIGN)
- num = (short) num;
- } else if (flags & SIGN)
- num = va_arg(args, int);
- else
- num = va_arg(args, unsigned int);
- str = number(str, num, base, field_width, precision, flags);
- }
- *str = '\0';
- return str-buf;
-}
-
-void serial_printf (const char *fmt, ...)
-{
- va_list args;
- uint i;
- char printbuffer[CFG_PBSIZE];
-
- va_start (args, fmt);
-
- /* For this to work, printbuffer must be larger than
- * anything we ever want to print.
- */
- i = vsprintf (printbuffer, fmt, args);
- va_end (args);
-
- /* Print the string */
- serial_puts (printbuffer);
-}
-#endif
diff --git a/uart-monitor/mkconfig b/uart-monitor/mkconfig
deleted file mode 100755
index 43b6f09..0000000
--- a/uart-monitor/mkconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh -e
-
-# Script to create header files and links to configure
-# X-Loader for a specific board.
-#
-# Parameters: Target Architecture CPU Board
-#
-# (C) 2004 Texas Instruments
-# (C) 2002 DENX Software Engineering, Wolfgang Denk <wd@denx.de>
-#
-
-APPEND=no # Default: Create new config file
-
-while [ $# -gt 0 ] ; do
- case "$1" in
- --) shift ; break ;;
- -a) shift ; APPEND=yes ;;
- *) break ;;
- esac
-done
-
-[ $# -lt 4 ] && exit 1
-[ $# -gt 5 ] && exit 1
-
-echo "Configuring for $1 board..."
-
-cd ./include
-
-#
-# Create link to architecture specific headers
-#
-rm -f asm/arch
-ln -s arch-$3 asm/arch
-
-if [ "$2" = "arm" ] ; then
- rm -f asm/proc
- ln -s proc-armv asm/proc
-fi
-
-#
-# Create include file for Make
-#
-echo "ARCH = $2" > config.mk
-echo "CPU = $3" >> config.mk
-echo "BOARD = $4" >> config.mk
-
-[ "$5" ] && echo "VENDOR = $5" >> config.mk
-
-#
-# Create board specific header file
-#
-if [ "$APPEND" = "yes" ] # Append to existing config file
-then
- echo >> config.h
-else
- > config.h # Create new config file
-fi
-echo "/* Automatically generated - do not edit */" >>config.h
-echo "#include <configs/$1.h>" >>config.h
-
-exit 0
diff --git a/uart-monitor/scripts/mkoneboot.sh b/uart-monitor/scripts/mkoneboot.sh
deleted file mode 100644
index f0862a5..0000000
--- a/uart-monitor/scripts/mkoneboot.sh
+++ /dev/null
@@ -1,16 +0,0 @@
-#!/bin/sh
-
-IMAGE1=x-load.bin.ift
-IMAGE2=x-load-signed.ift
-TMP=oneloader
-PAGESIZE=2048
-
-size=`ls -la $IMAGE1 | awk -F' ' '{ printf $5}'`
-let remain=$PAGESIZE-$size
-dd if=/dev/zero of=$IMAGE2 bs=1 count=512
-#dd if=/dev/zero of=zerofile bs=$remain count=1 > /dev/null 2> /dev/null
-cat $IMAGE1>>$IMAGE2
-
-rm -f $IMAGE1
-
-echo "Create $IMAGE2 completed..."
diff --git a/uart-monitor/scripts/signGP.c b/uart-monitor/scripts/signGP.c
deleted file mode 100644
index 0e8ed07..0000000
--- a/uart-monitor/scripts/signGP.c
+++ /dev/null
@@ -1,73 +0,0 @@
-//
-// signGP.c
-// Read the x-load.bin file and write out the x-load.bin.ift file.
-// The signed image is the original pre-pended with the size of the image
-// and the load address. If not entered on command line, file name is
-// assumed to be x-load.bin in current directory and load address is
-// 0x40200800.
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <sys/stat.h>
-#include <string.h>
-#include <malloc.h>
-
-
-main(int argc, char *argv[])
-{
- int i;
- char ifname[FILENAME_MAX], ofname[FILENAME_MAX], ch;
- FILE *ifile, *ofile;
- unsigned long loadaddr, len;
- struct stat sinfo;
-
-
- // Default to x-load.bin and 0x40200800.
- strcpy(ifname, "x-load.bin");
- loadaddr = 0x40200800;
-
- if ((argc == 2) || (argc == 3))
- strcpy(ifname, argv[1]);
-
- if (argc == 3)
- loadaddr = strtol(argv[2], NULL, 16);
-
- // Form the output file name.
- strcpy(ofname, ifname);
- strcat(ofname, ".ift");
-
- // Open the input file.
- ifile = fopen(ifname, "rb");
- if (ifile == NULL) {
- printf("Cannot open %s\n", ifname);
- exit(0);
- }
-
- // Get file length.
- stat(ifname, &sinfo);
- len = sinfo.st_size;
-
- // Open the output file and write it.
- ofile = fopen(ofname, "wb");
- if (ofile == NULL) {
- printf("Cannot open %s\n", ofname);
- fclose(ifile);
- exit(0);
- }
-
- // Pad 1 sector of zeroes.
- //ch = 0x00;
- //for (i=0; i<0x200; i++)
- // fwrite(&ch, 1, 1, ofile);
-
- fwrite(&len, 1, 4, ofile);
- fwrite(&loadaddr, 1, 4, ofile);
- for (i=0; i<len; i++) {
- fread(&ch, 1, 1, ifile);
- fwrite(&ch, 1, 1, ofile);
- }
-
- fclose(ifile);
- fclose(ofile);
-}